gconftool was added for Gnome-based distributions such as Ubuntu, but klik should continue to work fine without it.
I had used Klik numerous times prior to about a month ago, when attempts to install the script as per instructions began to be interrupted by:
sh: line 571: gconftool-2: command not found
I am running Knoppix 4.02, as I was when Klik formerly worked. Have you altered the script to include sw not on Knoppix? I get the same result when running Knoppix 5.0.
Thanks for any help.
gconftool was added for Gnome-based distributions such as Ubuntu, but klik should continue to work fine without it.
You can safely ignore the gconftool-2 message. klik works anyway.
IBM LSI SAS9220-8i M1015 46M0861 SAS/SATA PCI-e RAID Controller Both brackets
$139.00
LSI 9305-16i SATA SAS 12Gbs RAID Controller PCIe 3.0 x8 IT-Mode 4* 8643 SATA
$229.99
XDHXT DELL PERC H710P 6Gbps 1GB PCI RAID CONTROLLER 0XDHXT
$59.00
HPE 869102-001 Smart Array E208i-a SR Gen10 Storage Controller RAID SP: 871039
$129.99
Inspur LSI 9300-8i Raid Card 12Gbps HBA HDD Controller High Profile IT MODE
$15.98
LSI MegaRAID 9361-8i 12Gb PCIe 8-Port SAS/SATA RAID 1Gb w/BBU/CacheVault/License
$35.96
ORICO Multi Bay RAID Hard Drive Enclosure USB 3.0/ Type-C For 2.5/3.5'' HDD SSDs
$86.99
LSI MegaRAID 9361-8i 12Gbps PCIe 3 x8 SATA SAS 3 8 Port RAID + BBU & CacheVault
$39.00
Yottamaster 5 Bay RAID Hard Drive Enclosure USB3.1 Type C 2.5"/3.5" SATA HDD SSD
$142.49
ACASIS 2.5/3.5 inch 2 Bay SATA USB 3.0 Hard Drive Disk HDD SSD Enclosure 4 RAID
$58.99