Results 1 to 5 of 5

Thread: transfering documents Knoppix->Windows

  1. #1
    Junior Member
    Join Date
    Sep 2006
    Posts
    3

    transfering documents Knoppix->Windows

    alright...here's the low-down:

    A few months ago I accidentally destroied my Dell PC, it took some time but I built myself a new computer and everything functions correctly.
    I pulled the HD from the Dell and set it up as an extra HD on the new PC, put there was a problem, I couldn't access the Dell's "my Documents" folder because I did not have the correct admin setup. So whenever I looked at the folder's properties it said "size=0kb, 0 folders, ect." as though it didn't exist. Of course the information was just locked away, after two and a half months of gathering data I came across knoppix. After putting to CD and making it a bootable disk I finally could access the folder again, but there is one problem: I can't transfer the files.

    I am aware that it's unlikely I can safely transfer the contents of the folder to another HD, so I attempted to send it to my pocket USB drive, but every time I tried to copy it to the drive it said:

    Colud not write to /media/sdc1/Chess m.2 v1.0.mus.
    the drive is set to allow any one to write to it, but for some reason I can't, I even made a copy of the file on the desktop and tried the transfer from there, but it didn't work.

    Can anyone help me out of this dilema?

    For any one concerned about my trying to do something illegal, I am not. ".mus" files are files associated with the music writing software "Finale" and this particular document happens to be a particularly good song I wrote.

  2. #2
    Administrator Site Admin-
    Join Date
    Apr 2003
    Location
    USA
    Posts
    5,441

    Re: transfering documents Knoppix->Windows

    Quote Originally Posted by lorddane
    ...Can anyone help me out of this dilema?...
    Answer #6.
    ---
    Verifying of md5 checksum and burning a CD at slow speed are important.

  3. #3
    Junior Member
    Join Date
    Sep 2006
    Posts
    3
    The transfer was to a USB drive and the drive had already been mounted and set up as writeable

  4. #4
    Administrator Site Admin-
    Join Date
    Apr 2003
    Location
    USA
    Posts
    5,441
    Quote Originally Posted by lorddane
    The transfer was to a USB drive and the drive had already been mounted and set up as writeable
    That is very strange, it has always worked for me if I follow the instructions to make the device writeable. I can only offer two additional thoughts, and they are both longshots:
    • 1) Is by any chance this flash drive one with special "security software" on it that "protects" it from unauthorized users? If so it might have you locked into Windows.

      2) No offense, but does this flash drive, as some do, have a manual write protect swich on it, and if it does is the drive protected by the hardware switch?

  5. #5
    Junior Member
    Join Date
    Sep 2006
    Posts
    3
    none taken, the drive is nothing special. I got it as a free bonus when I bought my dell laptop, its just a cheap-o 64 Mb drive I don't think they would bother with anything special on that.

    Edit: If it is any help, the drive is FAT32.

Similar Threads

  1. Help with Knoppix 5.1 and saving documents from HD
    By johnnyseriuss in forum MS Windows & New to Linux
    Replies: 7
    Last Post: 12-23-2009, 07:36 AM
  2. Logged onto Knoppix & can't get documents to my ext HD
    By triviaace11 in forum General Support
    Replies: 3
    Last Post: 01-11-2009, 05:36 AM
  3. Transfering Files over network
    By LinkZ in forum Networking
    Replies: 3
    Last Post: 11-29-2004, 10:28 PM
  4. Transfering Modeuls
    By spitfire in forum General Support
    Replies: 0
    Last Post: 10-29-2004, 07:46 AM
  5. Windows XP and Administrator Documents
    By abstar in forum MS Windows & New to Linux
    Replies: 1
    Last Post: 08-24-2004, 05:34 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


Dell PowerEdge R720 Server - 2x8c CPU,256Gb RAM, 128Gb SSD/3x900Gb SAS, Proxmox picture

Dell PowerEdge R720 Server - 2x8c CPU,256Gb RAM, 128Gb SSD/3x900Gb SAS, Proxmox

$340.00



Dell PowerEdge R630 8SFF 2.6Ghz 20-Core 128GB Mem 2x10G+2x1G NIC 2x750W PSU picture

Dell PowerEdge R630 8SFF 2.6Ghz 20-Core 128GB Mem 2x10G+2x1G NIC 2x750W PSU

$399.04



Dell PowerEdge R920 24 SFF 4x E7-8891 v2 3.2GHz =40 Cores 1024GB No HDD H730P picture

Dell PowerEdge R920 24 SFF 4x E7-8891 v2 3.2GHz =40 Cores 1024GB No HDD H730P

$985.00



HP ProLiant DL360 G9 Server 2x E5-2660v3 2.60Ghz 20-Core 96GB P440ar picture

HP ProLiant DL360 G9 Server 2x E5-2660v3 2.60Ghz 20-Core 96GB P440ar

$304.35



Intel Xeon E5-2680 v4 2.4GHz 35MB 14-Core 120W LGA2011-3 SR2N7 picture

Intel Xeon E5-2680 v4 2.4GHz 35MB 14-Core 120W LGA2011-3 SR2N7

$17.99



Intel Xeon E5-2699v4 SR2JS 2.2GHz 22-Core 55MB 145W Server Processor CPU picture

Intel Xeon E5-2699v4 SR2JS 2.2GHz 22-Core 55MB 145W Server Processor CPU

$144.95



Intel Xeon Gold 6126 2.6 GHz LGA 3647 Server CPU Processor SR3B3 picture

Intel Xeon Gold 6126 2.6 GHz LGA 3647 Server CPU Processor SR3B3

$17.99



Intel Xeon Gold 6140 SR3AX 2.3GHz 18-Core Processor CPU picture

Intel Xeon Gold 6140 SR3AX 2.3GHz 18-Core Processor CPU

$44.99



Dell Precision T5600/t5610 Xeon E5-2670 2.6Ghz 16GB DDR3 RAM NO HDD Nvidia picture

Dell Precision T5600/t5610 Xeon E5-2670 2.6Ghz 16GB DDR3 RAM NO HDD Nvidia

$90.00



INTEL XEON GOLD 6240 2.6GHZ PROCESSOR | SRF8X picture

INTEL XEON GOLD 6240 2.6GHZ PROCESSOR | SRF8X

$399.99