Results 1 to 5 of 5

Thread: transfering documents Knoppix->Windows

  1. #1
    Junior Member
    Join Date
    Sep 2006
    Posts
    3

    transfering documents Knoppix->Windows

    alright...here's the low-down:

    A few months ago I accidentally destroied my Dell PC, it took some time but I built myself a new computer and everything functions correctly.
    I pulled the HD from the Dell and set it up as an extra HD on the new PC, put there was a problem, I couldn't access the Dell's "my Documents" folder because I did not have the correct admin setup. So whenever I looked at the folder's properties it said "size=0kb, 0 folders, ect." as though it didn't exist. Of course the information was just locked away, after two and a half months of gathering data I came across knoppix. After putting to CD and making it a bootable disk I finally could access the folder again, but there is one problem: I can't transfer the files.

    I am aware that it's unlikely I can safely transfer the contents of the folder to another HD, so I attempted to send it to my pocket USB drive, but every time I tried to copy it to the drive it said:

    Colud not write to /media/sdc1/Chess m.2 v1.0.mus.
    the drive is set to allow any one to write to it, but for some reason I can't, I even made a copy of the file on the desktop and tried the transfer from there, but it didn't work.

    Can anyone help me out of this dilema?

    For any one concerned about my trying to do something illegal, I am not. ".mus" files are files associated with the music writing software "Finale" and this particular document happens to be a particularly good song I wrote.

  2. #2
    Administrator Site Admin-
    Join Date
    Apr 2003
    Location
    USA
    Posts
    5,441

    Re: transfering documents Knoppix->Windows

    Quote Originally Posted by lorddane
    ...Can anyone help me out of this dilema?...
    Answer #6.
    ---
    Verifying of md5 checksum and burning a CD at slow speed are important.

  3. #3
    Junior Member
    Join Date
    Sep 2006
    Posts
    3
    The transfer was to a USB drive and the drive had already been mounted and set up as writeable

  4. #4
    Administrator Site Admin-
    Join Date
    Apr 2003
    Location
    USA
    Posts
    5,441
    Quote Originally Posted by lorddane
    The transfer was to a USB drive and the drive had already been mounted and set up as writeable
    That is very strange, it has always worked for me if I follow the instructions to make the device writeable. I can only offer two additional thoughts, and they are both longshots:
    • 1) Is by any chance this flash drive one with special "security software" on it that "protects" it from unauthorized users? If so it might have you locked into Windows.

      2) No offense, but does this flash drive, as some do, have a manual write protect swich on it, and if it does is the drive protected by the hardware switch?

  5. #5
    Junior Member
    Join Date
    Sep 2006
    Posts
    3
    none taken, the drive is nothing special. I got it as a free bonus when I bought my dell laptop, its just a cheap-o 64 Mb drive I don't think they would bother with anything special on that.

    Edit: If it is any help, the drive is FAT32.

Similar Threads

  1. Help with Knoppix 5.1 and saving documents from HD
    By johnnyseriuss in forum MS Windows & New to Linux
    Replies: 7
    Last Post: 12-23-2009, 07:36 AM
  2. Logged onto Knoppix & can't get documents to my ext HD
    By triviaace11 in forum General Support
    Replies: 3
    Last Post: 01-11-2009, 05:36 AM
  3. Transfering Files over network
    By LinkZ in forum Networking
    Replies: 3
    Last Post: 11-29-2004, 10:28 PM
  4. Transfering Modeuls
    By spitfire in forum General Support
    Replies: 0
    Last Post: 10-29-2004, 07:46 AM
  5. Windows XP and Administrator Documents
    By abstar in forum MS Windows & New to Linux
    Replies: 1
    Last Post: 08-24-2004, 05:34 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


IBM QRadar xx29 Server 4412Q2A picture

IBM QRadar xx29 Server 4412Q2A

$170.00



IBM 8203 E4A p520 Server 8203-E4A 4.2GHz 2-Core POWER6 32GB RAM / NO HDD USED picture

IBM 8203 E4A p520 Server 8203-E4A 4.2GHz 2-Core POWER6 32GB RAM / NO HDD USED

$99.99



ibm server z series picture

ibm server z series

$16000.00



IBM Power S822 12-Bay Server System Power8 Core 3.42Ghz DVD-Rom Drive 64GB No HD picture

IBM Power S822 12-Bay Server System Power8 Core 3.42Ghz DVD-Rom Drive 64GB No HD

$399.99



IBM Power 720 POWER7 00E6516 3.6GHz CPU 64GB RAM Server  picture

IBM Power 720 POWER7 00E6516 3.6GHz CPU 64GB RAM Server

$209.98



IBM Power 740 8205-E6C Express 8-SFF Power7 3.55GHz CPU 64GB RAM *No HDD* Server picture

IBM Power 740 8205-E6C Express 8-SFF Power7 3.55GHz CPU 64GB RAM *No HDD* Server

$191.99



IBM 7944AC1 System x3550 M3 Server 1*Intel Xeon X5650 2.67GHz 4GB SEE NOTES picture

IBM 7944AC1 System x3550 M3 Server 1*Intel Xeon X5650 2.67GHz 4GB SEE NOTES

$26.97



IBM System x3250 M4 Server Intel Xeon E3-1220 3.10GHz 8GB RAM No HDDs picture

IBM System x3250 M4 Server Intel Xeon E3-1220 3.10GHz 8GB RAM No HDDs

$58.52



IBM z14-ZR1 (3907) Tower picture

IBM z14-ZR1 (3907) Tower

$50575.00



1U IBM x3550 M5 4 Bay SFF SAS3 Server 2x E5-2683 V3 28 Core 128GB DDR4 2x Tray picture

1U IBM x3550 M5 4 Bay SFF SAS3 Server 2x E5-2683 V3 28 Core 128GB DDR4 2x Tray

$318.00