What's the output of?Code:infobash -v2
Kicker --> System --> Infocenter --> Memory for more details.
I have 1 GB of RAM and still not enough. After 2 hours of using Knoppix, I launch the performance viewer and I see that I have only a few MB of memory left. Does anyone know a command that frees up some RAM?
I use knoppix to learn Linux commands. Usually I make an apt-get update, launch Gaim and XMMS.
What's the output of?Code:infobash -v2
Kicker --> System --> Infocenter --> Memory for more details.
just one thing, linux does not free used memory, not until a unused are is needed again that is. so it might read 98% used but not actually mean that 98 is sed, perhaps 90% of that is just not freed yet.
does your computer work slowly?
I think you need to learn a bit about how Linux uses memory.Originally Posted by csodabogar
When applications won't be needing all the memory, Linux likes to use that unneeded memory for e.g. by caching files read from the harddrive, so that next time those files are used they can be read from the cache. But if an application needs more memory, Linux will immediately remove some files from the cache and give that memory to the application.
So before thinking about freeing some memory, you need to check if some of the memory is being used for caching files. If yes, then you don't need any command to free memory, because the memory used for caching will be freed automatically when needed.
Now start a console and run a command free which will tell how much memory is being used at the moment:
In this example, Linux is using 283632 kB (99%) of the memory. But 6916 kB + 75964 kB (29%) is used by "buffers" and "cached", and that memory is available to applications whenever they need it.Code:knoppix@0[knoppix]$ free total used free shared buffers cached Mem: 287504 283632 3872 0 6916 75964 -/+ buffers/cache: 200752 86752 Swap: 2028740 10884 2017856
So even through I have "only" 3872 kB (1%) free memory, in practise the amount available to applications is 86752 kB (30%).
Usually, when you want to know how much "free memory" there is in Linux, you'll want to ignore the memory used by buffers and file-cache like I have done in this example.
Supermicro 2U 6028R-E1CR24N 24x LFF- Wholesale Build Your Own Storage Server
$249.99
Dell Poweredge R730xd 24SFF 2x E5-2670 v3 2.3ghz 24-Cores 64gb H730 2x 750w
$194.99
Dell PowerEdge R710 8SFF 2U Server 2x X5680 3.33GHZ 12-Cores / 128gb / 2x Trays
$184.99
Dell Poweredge R730xd 24SFF 2x E5-2690 v3 2.6ghz 24-Cores 64gb H730 2x 750w
$194.99
Dell PowerEdge R630 Server 2x E5-2697v3 2.60Ghz 28-Core 128GB H730P Rails
$278.45
Dell PowerEdge R730 Server w Trays 128Gb 2x12c=24c CPUs 80Gb SSD/2x4Tb Proxmox
$400.00
Dell PowerEdge R720 Server w 8 Trays 128Gb 80Gb SSD/2x4Tb 2x8c CPUs Proxmox
$280.00
Supermicro CSE-825 2U Server Chassis 8 x 3.5" Backplane & 3x Chassis Fans
$149.99
Dell Poweredge R730 2x Xeon E5-2670 v3 2.3ghz 24-Cores / 64gb / H730 / iDracEnt
$204.99
Lenovo RS160 Xeon E3-1230 V5 16GB Rack Server – Powerful, Scalable, Reliable
$199.67