-
a
Without customization and remastering, I don't think so.
-
It works!!
>Without customization and remastering, I don't think so.
Then... It works!!!
Thank you.
lsmod show no ehci module loaded. Then i do:
root@ttyp0[knoppix]# insmod ehci-hcd
Using /lib/modules/2.4.20-xfs/kernel/drivers/usb/hcd/ehci-hcd.o
doing lsmod again, i have first module is ehci:
root@ttyp0[knoppix]# lsmod
Module Size Used by Not tainted
ehci-hcd 14696 0 (unused)
and, efectively, if i copy a 45 MB file from /mnt/sda1 to /tmp, it does at about 8-9 MB/s. It is more speed than is capable usb1.
I don't understand how it works, but it works.
And it seems that usb2 support will be better in next kernel version 2.4.21.
-
a
I don't think, that it will be beter, it is good enough, it is only a matter of loading property module. If you installed your own linux, you could compile USB2.0 support into the kernel.
-
some problems
Well, loading usb2 kernel module using insmod, works, but latelly i have some problems.
I use /home/knoppix on a usb2 drive, and have a directory like /home/knoppix/programs. I have added a line in .bashrc to load usb2. The problem is that in some cases, when I shutdown system, it is not cleanly unmounted, and next time i boot, there is nothing on /home/knoppix/programs -nor i can write nothing in it-, and i have to check /home/knoppix partition (knoppix.img). After check it, all works fine again (all missed in /home/knoppix/programs, "re-appear").
I suposse it is problem from usb2 module that not works as fine as usb1 module. Because using usb1 i had no problems.
Maybe solution will be usb2 in kernel 2.4.21?
Similar Threads
-
By watar in forum Hdd Install / Debian / Apt
Replies: 2
Last Post: 04-07-2005, 12:09 PM
-
By lothario in forum Hdd Install / Debian / Apt
Replies: 2
Last Post: 08-19-2004, 11:24 AM
-
By tony177 in forum General Support
Replies: 2
Last Post: 06-15-2004, 10:57 AM
-
By timread in forum Hardware & Booting
Replies: 1
Last Post: 12-07-2003, 03:12 PM
-
By Dave_Bechtel in forum News
Replies: 53
Last Post: 07-22-2003, 03:21 PM
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
Supermicro 4U 36 Bay Storage Server 2.4Ghz 8-C 128GB 1x1280W Rails TrueNAS ZFS
$712.98
Dell Poweredge R640 Server | 2x Xeon Gold 6132 | 128GB | H730P | 8x HDD Trays
$1849.00
HP ProLiant DL360 G9 Server | 2 x E5-2660V3 2.6Ghz | 64GB | 2 x 900GB SAS HDD
$339.00
Dell R730xd 12LFF 2.6Ghz 20-C 128GB H730 2x10G+2x1G NIC 2x1100W 12x Trays Rails
$721.05
DELL PowerEdge R730 Server 2x E5-2690v3 2.6GHz =24 Cores 32GB H730 4xRJ45
$274.00
Dell PowerEdge R730XD 28 Core Server 2X Xeon E5-2680 V4 H730 128GB RAM No HDD
$389.99
Dell PowerEdge R620 Server 2x E5-2660 v1 2.2GHz 16 Cores 256GB RAM 2x 300GB HDD
$79.19
Dell PowerEdge R720XD Xeon E5-2680 V2 2.8GHz 20 Cores 256GB RAM 12x4TB
$510.00
Dell PowerEdge R820 Server 4x 8-Core E5-4610v2 2.3GHz Total 256GB 0HD 2x 1100w
$250.00
Dell Poweredge R730xd 2.5in 2x E5-2690 v3 2.6ghz 24-Cores 64gb H730 2x 750w
$189.99