Kchmviewer is updated and fixed now.
Unfortunately, varicad is not klik-able yet.
Hi Probono,
I'd like to try this but the rpm is missing. It's in the Contributed section and the software's homepage
says that version 2.6 is available.
BTW, the Varicad kilk asks for the maintainers email before trying to d/l. Is there a way around
that?
Thanks!
Brian
Kchmviewer is updated and fixed now.
Unfortunately, varicad is not klik-able yet.
Thanks!
Can you check khexedit please?
Hi Brian,
I have updated kchmviewer to 2.0
Unfortunately, varicad isn't available yet via klik.
Greetings,
probono
Hi!Originally Posted by probono
Just tried kchmviewer. D/L ok but won't run.....
I also tried Gaim but that was broken as well
Thanks for checking this!
Recipe updated!
Try it now: klik://kchmviewer
Intel XEON E5-2699 V3 CPU PROCESSOR 18 CORE 2.30GHZ 45MB L3 CACHE 145W SR1XD
$45.00
Dell R730xd 12LFF 2.6Ghz 20-C 128GB H730 2x10G+2x1G NIC 2x1100W 12x Trays Rails
$721.05
Dell Poweredge R640 Server | 2x Xeon Gold 6132 | 512GB | H730P | 8x HDD Trays
$2549.00
CSE-118 Supermicro 1U 3x GPU Server 2.1Ghz 16-C 128GB CX353A 2x1600W PSU Rails
$450.03
Intel Xeon E5-2680 v4 2.4GHz 35MB 14-Core 120W LGA2011-3 SR2N7
$17.99
Intel Xeon Gold 6140 SR3AX 2.3GHz 18-Core Processor CPU
$44.99
Intel Xeon Gold 6138 2.0GHz 27.5MB 20-Core 125W LGA3647 SR3B5
$46.00
SR1XP Intel Xeon E5-2680 v3 12 Core 30MB 2.5GHz LGA 2011-3 A Grade Processor
$5.09
HP Workstation Z640 2x Xeon E5-2623V4 32GB Ram Dual 256GB SSD K420 Linux GA
$234.98
Dell Precision T5600/t5610 Xeon E5-2670 2.6Ghz 16GB DDR3 RAM NO HDD Nvidia
$90.00