Results 1 to 6 of 6

Thread: OpenMosix and DHCP

  1. #1
    Member registered user
    Join Date
    May 2003
    Location
    Los Angeles, California, USA
    Posts
    40

    OpenMosix and DHCP

    This might be and probably is a n00b question.....but, how do I go about trying to get a network boot using terminal server if there is already a DHCP sever on the network. Whenever I boot a computer it loads PWE but when it is searching for the DHCP server it always returns the main Windowz server instead of my terminal server. Thus the boot fails. Some times I can get the network boot to load but it is far from a sure thing....

    Another question I have is......when asked as to the IP range that the terminal server can delegate do i have to specify a range that is on the same sub domain as the terminal server itself? That is to say if the terminal servers IP is 192.168.20.111 can I specify a range that is 192.168.35.111 192.168.35.254? Also, is the range linked in any way to the IP that the client machine held previously?

    Thank you for your time and replies

  2. #2
    Senior Member registered user
    Join Date
    Jan 2003
    Location
    Podunk, Idaho, USA
    Posts
    470
    At home I have a linux router that is a dhcp server and I can PXE boot to a machine running knoppix terminal server or clusterKnoppix openMosix terminal server no problem.

    However, at school (win2k) I cannot get the PXE boot disk to discover my terminal server. Go figure.
    is the range linked in any way to the IP that the client machine held previously?
    No, my machine that boots into linux with dhcp is 192.168.1.66, however when I gave terminal server the address range of 192.168.1.200 - 254 it came up as 192.168.1.200.


    rock

  3. #3
    Member registered user
    Join Date
    May 2003
    Location
    Los Angeles, California, USA
    Posts
    40
    This is my problem as well. When at home on a simple appliance based network it works. While on a server-delegated network, however, the connection fails. Any help?

  4. #4
    Member registered user
    Join Date
    May 2003
    Location
    Los Angeles, California, USA
    Posts
    40
    Does nobody have an answer? I have fiddled with this for a week and gotten nowhere. Anybody! please help me. I really like the idea of a Cluster but need to try it in a workable environment. Any help is greatly appreciated even if it is just speculation on what the problem may be. Once again thank you.

  5. #5
    Senior Member registered user
    Join Date
    Nov 2002
    Location
    Auckland, New Zealand
    Posts
    818
    There is no simple way. If you have 2 dhcp servers on one network there isn't much you can do.

  6. #6
    Member registered user
    Join Date
    May 2003
    Location
    Los Angeles, California, USA
    Posts
    40
    An answer I feared but suspected. At least I can put it to rest now. Thank you for your reply.

Similar Threads

  1. DHCP
    By renaxgade in forum General Support
    Replies: 8
    Last Post: 12-23-2003, 02:35 AM
  2. Openmosix terminal server
    By cybervet in forum General Support
    Replies: 1
    Last Post: 10-27-2003, 11:44 PM
  3. Fixed ip-adress in Knoppix to use openmosix
    By ktheking in forum General Support
    Replies: 1
    Last Post: 08-06-2003, 03:53 AM
  4. DHCP ok but...
    By tyiooo in forum Networking
    Replies: 19
    Last Post: 06-11-2003, 09:28 AM
  5. openmosix knoppix
    By mazogs in forum Ideas
    Replies: 23
    Last Post: 06-06-2003, 12:42 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


Dell PowerEdge R720 Server - 2x8c CPU,256Gb RAM, 128Gb SSD/3x600Gb SAS, Proxmox picture

Dell PowerEdge R720 Server - 2x8c CPU,256Gb RAM, 128Gb SSD/3x600Gb SAS, Proxmox

$360.00



Dell R730 w/ 2x E5-2650v3 10c, 192GB (12x16GB) RAM, H730 Mini, 2x 750W PSU picture

Dell R730 w/ 2x E5-2650v3 10c, 192GB (12x16GB) RAM, H730 Mini, 2x 750W PSU

$349.99



Dell EMC NX3230 Server picture

Dell EMC NX3230 Server

$599.99



Dell PowerEdge R620 Rack Server picture

Dell PowerEdge R620 Rack Server

$71.99



Dell PowerEdge R730XD 28 Core Server 2X Xeon E5-2680 V4 H730 128GB RAM No HDD picture

Dell PowerEdge R730XD 28 Core Server 2X Xeon E5-2680 V4 H730 128GB RAM No HDD

$389.99



HP Proliant DL360 Gen9 28 Core SFF Server 2X E5-2680 V4 16GB RAM P440ar No HDD picture

HP Proliant DL360 Gen9 28 Core SFF Server 2X E5-2680 V4 16GB RAM P440ar No HDD

$191.95



HP ProLiant DL360 G9 Server 2x E5-2690v3 2.60Ghz 24-Core 256GB P440ar picture

HP ProLiant DL360 G9 Server 2x E5-2690v3 2.60Ghz 24-Core 256GB P440ar

$365.30



Dell PowerEdge R720XD Xeon E5-2680 V2 2.8GHz 20 Cores 256GB RAM 12x4TB picture

Dell PowerEdge R720XD Xeon E5-2680 V2 2.8GHz 20 Cores 256GB RAM 12x4TB

$510.00



DELL PowerEdge R630 8SFF Server 2x E5-2690v3 2.6GHz =24 Cores 32GB H730 4xRJ45 picture

DELL PowerEdge R630 8SFF Server 2x E5-2690v3 2.6GHz =24 Cores 32GB H730 4xRJ45

$254.00



HP ProLiant DL380 Gen9 16SFF 2x E5-2680v4 2.4GHz =28 Cores 64GB P840 4xRJ45 picture

HP ProLiant DL380 Gen9 16SFF 2x E5-2680v4 2.4GHz =28 Cores 64GB P840 4xRJ45

$353.00