-
Remastering DVD -- compression required?
I've been tinkering w/ creating customized Knoppix images and have been pleased w/ the results. I've successfully created bootable custom CD's and thumbdrives. My real goal however is to create larger custom distributions (3-4 GB expected total filesystem size) that I will deploy on large capacity thumbdrives or DVDs. Here's the question:
Is it required that I use a compressed filesystem? I find that the compression process on my hardware takes 45 minutes to an hour or longer (depending on how large it is and which machine is handling the compression process) and this creates a somewhat painful development loop to test minor changes. One thought I had was to just use a compression level that was not very aggressive but I don't see any options for that on the man page for create_compressed_fs.
Any experience or suggestions on this? All of the HOWTO's I've found don't address this point.
Assuming this can be done (that is, that I can use a non-compressed filesystem) -- are there any reasons that I wouldn't want to do this?
Thanks!
-Andy
-
Junior Member
registered user
if you dont want to use a compressed fs you will need to change the way it is mounted. For this you will need to look at the outer layer: minirt.gz
loop mount a cd image ; cd /boot ; gzip the minirt.gz ; loop mount minirt ; see what you can do in there.
-- are there any reasons that I wouldn't want to do this?
due to the slow access of optical media it is probably faster to load less data and decompress it than to load uncompressed image.
cloop also provides indexing of the blocks so they can be accessed as required, that may be faster than an uncompressed ISO image.
those arguements concern your final image, not reducing your test cycle.
http://www.knoppix.net/wiki/Cloop#Cr...pressed_image:
adjusting the block size varies speed vs compresion ratio.
http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=164015
create_compressed_fs has been worked on recently , you may find it works faster if can install the lastest version.
Thanks for not doing the leg work yourself I found some useful info along the way.
HTH
-
Junior Member
registered user
Similar Threads
-
By shah in forum Customising & Remastering
Replies: 1
Last Post: 08-23-2006, 02:58 PM
-
By rash in forum Customising & Remastering
Replies: 1
Last Post: 06-10-2006, 11:58 AM
-
By leiyang in forum General Support
Replies: 0
Last Post: 08-11-2004, 05:33 PM
-
By Sago7 in forum Customising & Remastering
Replies: 3
Last Post: 08-05-2004, 11:12 PM
-
By CrashedAgain in forum Customising & Remastering
Replies: 2
Last Post: 08-05-2004, 01:06 AM
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
ASUS H110M-R Motherboard Intel 6th/7th Gen LGA1151 DDR4 Micro-ATX i/o shield
$42.00
Gigabyte GA-Q170M-D3H-GSM LGA1151 DDR4 Desktop Motherboard w/ I/O Plate
$39.99
GIGABYTE B450M DS3H WIFI (AMD Ryzen AM4/M.2/HMDI/DVI/USB 3.1/DDR4 Motherboard
$64.99
ASRock B450M Pro4 AM4 AMD Motherboard
$40.00
Asus Prime H310M-A R2.0 Intel LGA 1151 DDR4 Desktop Motherboard
$54.99
Asus Prime A320M-K mATX AM4 Motherboard (Ryzen 1000-5000 Ready)
$49.99
ASUS PRIME B360M-C LGA1151 DDR4 mATX Motherboard w/Intel i3-8100 CPU & IO Shield
$57.00
GIGABYTE GA-X99-UD4P MOTHERBOARD, M.2 SATA3, LGA2011-3, DDR4, & I/O Shield
$69.99
Gigabyte M-ATX motherboard with Intel Core i3 8100 CPU and 8GB DDR4 RAM
$84.00
ASUS B85M-E Motherboard Intel B85 (4th Gen) LGA1150 DDR3 microATX
$39.99