KnoppixOn CD can't detect Intel Pro 100 NIC on motherboard

[ckapsl]

Greetings,

I have a Dell Dimension 8200 desktop computer, with an integrated NIC - the Int[/b]el Pro 100. The card works fine under M$ Windows XP.

I booted Knoppix from a CD, using the 2003-05-18 version. The network card does not seem to be detected. I did some snooping around to try and find the cause, but came up short. Any help that you can provide is appreciated. Here is my info:

Result of uname:
Linux Knoppix 2.4.20-xfs #1 SMP Mit Mär 26 15:37:36 CET 2003 i686 unknown unknown GNU/Linux

[ckapsl]

Here is the result of dmesg. I cannot find anything in it that relates to the Intel Pro 100 NIC, so I have posted everything. Sorry!


BIOS-e820: 0000000000100000 - 000000001ff74000 (usable)
BIOS-e820: 000000001ff74000 - 000000001ff76000 (ACPI NVS)
BIOS-e820: 000000001ff76000 - 000000001ff97000 (ACPI data)
BIOS-e820: 000000001ff97000 - 0000000020000000 (reserved)
BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved)
BIOS-e820: 00000000fecf0000 - 00000000fecf1000 (reserved)
BIOS-e820: 00000000fed20000 - 00000000fed90000 (reserved)
BIOS-e820: 00000000fee00000 - 00000000fee10000 (reserved)
BIOS-e820: 00000000ffb00000 - 0000000100000000 (reserved)
511MB LOWMEM available.
found SMP MP-table at 000fe710
hm, page 000fe000 reserved twice.
hm, page 000ff000 reserved twice.
hm, page 000f0000 reserved twice.
On node 0 totalpages: 130932
zone(0): 4096 pages.
zone(1): 126836 pages.
zone(2): 0 pages.
ACPI: Searched entire block, no RSDP was found.
ACPI: RSDP located at physical address c00feb90
RSD PTR v0 [DELL ]
__va_range(0xfd1cd, 0x6: idx=8 mapped at ffff6000
ACPI table found: RSDT v1 [DELL 8300 0.6]
__va_range(0xfd201, 0x24): idx=8 mapped at ffff6000
__va_range(0xfd201, 0x74): idx=8 mapped at ffff6000
ACPI table found: FACP v1 [DELL 8300 0.6]
__va_range(0xfffc8432, 0x24): idx=8 mapped at ffff6000
__va_range(0xfffc8432, 0xa7): idx=8 mapped at ffff6000
ACPI table found: SSDT v1 [DELL st_ex 0.4096]
__va_range(0xfd275, 0x24): idx=8 mapped at ffff6000
__va_range(0xfd275, 0x6c): idx=8 mapped at ffff6000
ACPI table found: APIC v1 [DELL 8300 0.6]
__va_range(0xfd275, 0x6c): idx=8 mapped at ffff6000
LAPIC (acpi_id[0x0001] id[0x0] enabled[1])
CPU 0 (0x0000) enabledProcessor #0 Pentium 4(tm) XEON(tm) APIC version 16

LAPIC (acpi_id[0x0002] id[0x1] enabled[0])
CPU 1 (0x0100) disabled
LAPIC (acpi_id[0x0003] id[0x1] enabled[0])
CPU 2 (0x0100) disabled
LAPIC (acpi_id[0x0004] id[0x3] enabled[0])
CPU 3 (0x0300) disabled
IOAPIC (id[0x1] address[0xfec00000] global_irq_base[0x0])
INT_SRC_OVR (bus[0] irq[0x0] global_irq[0x2] polarity[0x0] trigger[0x0])
INT_SRC_OVR (bus[0] irq[0x9] global_irq[0x9] polarity[0x1] trigger[0x3])
4 CPUs total
Local APIC address fee00000
__va_range(0xfd2e1, 0x24): idx=8 mapped at ffff6000
__va_range(0xfd2e1, 0x2: idx=8 mapped at ffff6000
ACPI table found: BOOT v1 [DELL 8300 0.6]
Enabling the CPU's according to the ACPI table
Intel MultiProcessor Specification v1.4
Virtual Wire compatibility mode.
OEM ID: DELL Product ID: Dim 8300 APIC at: 0xFEE00000
I/O APIC #1 Version 32 at 0xFEC00000.
Processors: 1
Kernel command line: ramdisk_size=100000 init=/etc/init lang=us apm=power-off hda=scsi hdb=scsi hdc=scsi hdd=scsi hde=scsi hdf=scsi hdg=scsi hdh=scsi vga=791 initrd=miniroot.gz nomce quiet BOOT_IMAGE=knoppix BOOT_IMAGE=vmlinuz lang=us screen=1280x1024
ide_setup: hda=scsi
ide_setup: hdb=scsi
ide_setup: hdc=scsi
ide_setup: hdd=scsi
ide_setup: hde=scsi
ide_setup: hdf=scsi
ide_setup: hdg=scsi
ide_setup: hdh=scsi
Initializing CPU#0
Detected 2660.092 MHz processor.
Console: colour dummy device 80x25
Calibrating delay loop... 5308.41 BogoMIPS
Memory: 514868k/523728k available (1270k kernel code, 8476k reserved, 503k data, 128k init, 0k highmem)
Dentry cache hash table entries: 65536 (order: 7, 524288 bytes)
Inode cache hash table entries: 32768 (order: 6, 262144 bytes)
Mount-cache hash table entries: 8192 (order: 4, 65536 bytes)
Buffer-cache hash table entries: 32768 (order: 5, 131072 bytes)
Page-cache hash table entries: 131072 (order: 7, 524288 bytes)
CPU: L1 I cache: 0K, L1 D cache: 8K
CPU: L2 cache: 512K
CPU: Hyper-Threading is disabled
CPU: After generic, caps: bfebfbff 00000000 00000000 00000000
CPU: Common caps: bfebfbff 00000000 00000000 00000000
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Checking 'hlt' instruction... OK.
Checking for popad bug... OK.
POSIX conformance testing by UNIFIX
mtrr: v1.40 (20010327) Richard Gooch (rgooch@atnf.csiro.au)
mtrr: detected mtrr type: Intel
CPU: L1 I cache: 0K, L1 D cache: 8K
CPU: L2 cache: 512K
CPU: Hyper-Threading is disabled
CPU: After generic, caps: bfebfbff 00000000 00000000 00000000
CPU: Common caps: bfebfbff 00000000 00000000 00000000
CPU0: Intel(R) Pentium(R) 4 CPU 2.66GHz stepping 07
per-CPU timeslice cutoff: 1462.48 usecs.
enabled ExtINT on CPU#0
ESR value before enabling vector: 00000000
ESR value after enabling vector: 00000000
Error: only one processor found.
ENABLING IO-APIC IRQs
Setting 1 in the phys_id_present_map
...changing IO-APIC physical APIC ID to 1 ... ok.
init IO_APIC IRQs
IO-APIC (apicid-pin) 1-0, 1-13 not connected.
..TIMER: vector=0x31 pin1=2 pin2=0
number of MP IRQ sources: 40.
number of IO-APIC #1 registers: 24.
testing the IO APIC.......................

IO APIC #1......
.... register #00: 01000000
....... : physical APIC id: 01
.... register #01: 00178020
....... : max redirection entries: 0017
....... : PRQ implemented: 1
....... : IO APIC version: 0020
.... register #02: 00178020
....... : arbitration: 00
WARNING: unexpected IO-APIC, please mail
to linux-smp@vger.kernel.org
.... IRQ redirection table:
NR Log Phy Mask Trig IRR Pol Stat Dest Deli Vect:
00 000 00 1 0 0 0 0 0 0 00
01 001 01 0 0 0 0 0 1 1 39
02 001 01 0 0 0 0 0 1 1 31
03 001 01 0 0 0 0 0 1 1 41
04 001 01 0 0 0 0 0 1 1 49
05 001 01 0 0 0 0 0 1 1 51
06 001 01 0 0 0 0 0 1 1 59
07 001 01 0 0 0 0 0 1 1 61
08 001 01 0 0 0 0 0 1 1 69
09 001 01 0 0 0 0 0 1 1 71
0a 001 01 0 0 0 0 0 1 1 79
0b 001 01 0 0 0 0 0 1 1 81
0c 001 01 0 0 0 0 0 1 1 89
0d 000 00 1 0 0 0 0 0 0 00
0e 001 01 0 0 0 0 0 1 1 91
0f 001 01 0 0 0 0 0 1 1 99
10 001 01 1 1 0 1 0 1 1 A1
11 001 01 1 1 0 1 0 1 1 A9
12 001 01 1 1 0 1 0 1 1 B1
13 001 01 1 1 0 1 0 1 1 B9
14 001 01 1 1 0 1 0 1 1 C1
15 001 01 1 1 0 1 0 1 1 C9
16 001 01 1 1 0 1 0 1 1 D1
17 001 01 1 1 0 1 0 1 1 D9
IRQ to pin mappings:
IRQ0 -> 0:2
IRQ1 -> 0:1
IRQ3 -> 0:3
IRQ4 -> 0:4
IRQ5 -> 0:5
IRQ6 -> 0:6
IRQ7 -> 0:7
IRQ8 -> 0:8
IRQ9 -> 0:9
IRQ10 -> 0:10
IRQ11 -> 0:11
IRQ12 -> 0:12
IRQ14 -> 0:14
IRQ15 -> 0:15
IRQ16 -> 0:16
IRQ17 -> 0:17
IRQ18 -> 0:18
IRQ19 -> 0:19
IRQ20 -> 0:20
IRQ21 -> 0:21
IRQ22 -> 0:22
IRQ23 -> 0:23
.................................... done.
Using local APIC timer interrupts.
calibrating APIC timer ...
..... CPU clock speed is 2659.9887 MHz.
..... host bus clock speed is 132.9993 MHz.
cpu: 0, clocks: 1329993, slice: 664996
CPU0<T0:1329984,T1:664976,D:12,S:664996,C:1329993>
Waiting on wait_init_idle (map = 0x0)
All processors have done init_idle
PCI: PCI BIOS revision 2.10 entry at 0xfbb3c, last bus=2
PCI: Using configuration type 1
PCI: Probing PCI hardware
Transparent bridge - Intel Corp. 82801BA/CA/DB PCI Bridge
PCI: Using IRQ router default [8086/24d0] at 00:1f.0
PCI->APIC IRQ transform: (B0,I29,P0) -> 16
PCI->APIC IRQ transform: (B0,I29,P1) -> 19
PCI->APIC IRQ transform: (B0,I29,P2) -> 18
PCI->APIC IRQ transform: (B0,I29,P0) -> 16
PCI->APIC IRQ transform: (B0,I29,P3) -> 23
PCI->APIC IRQ transform: (B0,I31,P0) -> 17
PCI->APIC IRQ transform: (B0,I31,P0) -> 17
PCI->APIC IRQ transform: (B0,I31,P1) -> 17
PCI->APIC IRQ transform: (B1,I0,P0) -> 16
PCI->APIC IRQ transform: (B2,I1,P0) -> 22
PCI->APIC IRQ transform: (B2,I2,P0) -> 17
PCI->APIC IRQ transform: (B2,I8,P0) -> 20
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society NET3.039
Initializing RT netlink socket
Starting kswapd
VFS: Disk quotas vdquot_6.5.1
vesafb: framebuffer at 0xf4000000, mapped to 0xe080d000, size 65536k
vesafb: mode is 1024x768x16, linelength=2048, pages=41
vesafb: protected mode interface info at c000:56a0
vesafb: scrolling: redraw
vesafb: directcolor: size=0:5:6:5, shift=0:11:5:0
Console: switching to colour frame buffer device 128x48
fb0: VESA VGA frame buffer device
pty: 256 Unix98 ptys configured
Uniform Multi-Platform E-IDE driver Revision: 6.31
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
PCI_IDE: unknown IDE controller on PCI bus 00 device f9, VID=8086, DID=24db
PCI_IDE: chipset revision 2
PCI_IDE: not 100% native mode: will probe irqs later
ide0: BM-DMA at 0xffa0-0xffa7, BIOS settings: hdaMA, hdbio
ide1: BM-DMA at 0xffa8-0xffaf, BIOS settings: hdcMA, hddio
PCI_IDE: unknown IDE controller on PCI bus 00 device fa, VID=8086, DID=24d1
PCI_IDE: chipset revision 2
PCI_IDE: 100% native mode on irq 17
ide2: BM-DMA at 0xfea0-0xfea7, BIOS settings: hdeio, hdfio
ide3: BM-DMA at 0xfea8-0xfeaf, BIOS settings: hdgio, hdhio
hda: WDC WD1200JB-75CRA0, ATA DISK drive
hdc: _NEC DVD+RW ND-1100A, ATAPI CD/DVD-ROM drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
ide1 at 0x170-0x177,0x376 on irq 15
hda: 234441648 sectors (120034 MB) w/8192KiB Cache, CHS=14593/255/63
ide-cd: passing drive hdc to ide-scsi emulation.
Partition check:
hda: hda1 hda2
Floppy drive(s): fd0 is 1.44M
FDC 0 is a post-1991 82077
RAMDISK driver initialized: 16 RAM disks of 100000K size 1024 blocksize
Cronyx Ltd, Synchronous PPP and CISCO HDLC (c) 1994
Linux port (c) 1998 Building Number Three Ltd & Jan "Yenya" Kasprzak.
Promise Fasttrak(tm) Softwareraid driver 0.03beta: No raid array found
Highpoint HPT370 Softwareraid driver for linux version 0.01
No raid array found
SCSI subsystem driver Revision: 1.00
scsi0 : SCSI host adapter emulation for IDE ATAPI devices
Vendor: _NEC Model: DVD+RW ND-1100A Rev: 10FD
Type: CD-ROM ANSI SCSI revision: 02
Attached scsi CD-ROM sr0 at scsi0, channel 0, id 0, lun 0
sr0: scsi3-mmc drive: 40x/40x writer cd/rw xa/form2 cdda tray
Uniform CD-ROM driver Revision: 3.12
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP, IGMP
IP: routing cache hash table of 4096 buckets, 32Kbytes
TCP: Hash tables configured (established 32768 bind 3276
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
RAMDISK: Compressed image found at block 0
Freeing initrd memory: 468k freed
VFS: Mounted root (ext2 filesystem).
NCR53c406a: no available ports found
aec671x_detect:
scsi: <fdomain> Detection failed (no card)
megaraid: v1.18 (Release Date: Thu Oct 11 15:02:53 EDT 2001)
megaraid: no BIOS enabled.
DC390: 0 adapters found
Failed initialization of WD-7000 SCSI card!
ISO 9660 Extensions: Microsoft Joliet Level 3
kmod: failed to exec /sbin/modprobe -s -k nls_iso8859-1, errno = 2
kmod: failed to exec /sbin/modprobe -s -k nls_iso8859-1, errno = 2
ISO 9660 Extensions: RRIP_1991A
cloop: Welcome to cloop v0.68
cloop: /cdrom/KNOPPIX/KNOPPIX: 29282 blocks, 65536 bytes/block, largest block is 65562 bytes.
cloop: loaded (max 1 devices)
ISO 9660 Extensions: RRIP_1991A
Freeing unused kernel memory: 128k freed
Real Time Clock Driver v1.10e
apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16)
Linux Kernel Card Services 3.1.22
options: [pci] [cardbus] [pm]
Intel PCIC probe: not found.
Databook TCIC-2 PCMCIA probe: not found.
unloading Kernel Card Services
usb.c: registered new driver usbdevfs
usb.c: registered new driver hub
usb-uhci.c: $Revision: 1.275 $ time 15:50:01 Mar 26 2003
usb-uhci.c: High bandwidth mode enabled
PCI: Setting latency timer of device 00:1d.0 to 64
usb-uhci.c: USB UHCI at I/O 0xff80, IRQ 16
usb-uhci.c: Detected 2 ports
usb.c: new USB bus registered, assigned bus number 1
hub.c: USB hub found
hub.c: 2 ports detected
PCI: Setting latency timer of device 00:1d.1 to 64
usb-uhci.c: USB UHCI at I/O 0xff60, IRQ 19
usb-uhci.c: Detected 2 ports
usb.c: new USB bus registered, assigned bus number 2
hub.c: USB hub found
hub.c: 2 ports detected
PCI: Setting latency timer of device 00:1d.2 to 64
usb-uhci.c: USB UHCI at I/O 0xff40, IRQ 18
usb-uhci.c: Detected 2 ports
usb.c: new USB bus registered, assigned bus number 3
hub.c: USB hub found
hub.c: 2 ports detected
PCI: Setting latency timer of device 00:1d.3 to 64
usb-uhci.c: USB UHCI at I/O 0xff20, IRQ 16
usb-uhci.c: Detected 2 ports
usb.c: new USB bus registered, assigned bus number 4
hub.c: USB hub found
hub.c: 2 ports detected
usb-uhci.c: v1.275:USB Universal Host Controller Interface driver
hub.c: new USB device 00:1d.0-1, assigned address 2
usb.c: USB device 2 (vend/prod 0x7f7/0x102) is not claimed by any active driver.
usbdevfs: remount parameter error
hub.c: new USB device 00:1d.0-2, assigned address 3
usb.c: USB device 3 (vend/prod 0x40a/0x2) is not claimed by any active driver.
hub.c: new USB device 00:1d.2-1, assigned address 2
usb.c: USB device 2 (vend/prod 0x50d/0x960) is not claimed by any active driver.
hub.c: new USB device 00:1d.1-1, assigned address 2
usb.c: USB device 2 (vend/prod 0x46d/0xc501) is not claimed by any active driver.
Initializing USB Mass Storage driver...
usb.c: registered new driver usb-storage
usb-uhci.c: interrupt, status 2, frame# 224
usb.c: registered new driver hiddev
usb_control/bulk_msg: timeout
mice: PS/2 mouse device common for all mice
scsi1 : SCSI emulation for USB Mass Storage devices
Vendor: IC25N040 Model: ATCS04-0 Rev: CA4O
Type: Direct-Access ANSI SCSI revision: 02
Attached scsi disk sda at scsi1, channel 0, id 0, lun 0
SCSI device sda: 78140160 512-byte hdwr sectors (40008 MB)
sda: sda1
WARNING: USB Mass Storage data integrity not assured
USB Mass Storage device found at 2
USB Mass Storage support registered.
usb.c: registered new driver hid
usb-uhci.c: interrupt, status 2, frame# 1137
hiddev0: USB HID v1.00 Joystick [ UPS] on usb3:2.0
input0: USB HID v1.10 Mouse [Logitech USB Receiver] on usb2:2.0
hid-core.c: v1.8.1 Andreas Gal, Vojtech Pavlik <vojtech@suse.cz>
hid-core.c: USB HID support drivers

usb-uhci.c: ENXIO 84000280, flags 0, urb ddc858d0, burb ddc859d0
usb-uhci.c: ENXIO 84000280, flags 0, urb ddc858d0, burb ddc859d0
usb-uhci.c: ENXIO 84000280, flags 0, urb ddc858d0, burb ddc859d0
usb-uhci.c: ENXIO 84000280, flags 0, urb ddc858d0, burb ddc859d0
usb-uhci.c: ENXIO 84000280, flags 0, urb ddc858d0, burb ddc859d0
usb-uhci.c: ENXIO 84000280, flags 0, urb ddc858d0, burb ddc859d0
Serial driver version 5.05c (2001-07-0 with MANY_PORTS SHARE_IRQ SERIAL_PCI ISAPNP enabled
ttyS00 at 0x03f8 (irq = 4) is a 16550A
Redundant entry in serial pci_table. Please send the output of
lspci -vv, this message (14e4,4212,1028,0002)
and the manufacturer and name of serial board or modem board
to serial-pci-info@lists.sourceforge.net.
register_serial(): autoconfig failed
parport0: PC-style at 0x378 (0x77 [PCSPP,TRISTATE]
parport0: irq 7 detected
parport0: Printer, Xerox Xerox WorkCentre 470cx
i810_rng hardware driver 0.9.8 loaded
FAT: Did not find valid FSINFO signature.
Found signature1 0x541c01c8 signature2 0xab86d3d8 sector=32745.
VFS: Can't find a valid FAT filesystem on dev 03:02.
FAT: Did not find valid FSINFO signature.
Found signature1 0x541c01c8 signature2 0xab86d3d8 sector=32745.
VFS: Can't find a valid FAT filesystem on dev 03:02.
NTFS driver v1.1.22 [Flags: R/W MODULE]

[ckapsl]

Here is the result of lspci -v:

00:00.0 Host bridge: Intel Corp.: Unknown device 2578 (rev 02)
Subsystem: Dell Computer Corporation: Unknown device 0157
Flags: bus master, fast devsel, latency 0
Memory at e8000000 (32-bit, prefetchable) [size=128M]
Capabilities: [e4] #09 [2106]
Capabilities: [a0] AGP version 3.0

00:01.0 PCI bridge: Intel Corp.: Unknown device 2579 (rev 02) (prog-if 00 [Normal decode])
Flags: bus master, 66Mhz, fast devsel, latency 64
Bus: primary=00, secondary=01, subordinate=01, sec-latency=64
I/O behind bridge: 0000d000-0000dfff
Memory behind bridge: fe900000-feafffff
Prefetchable memory behind bridge: f0000000-f7ffffff

00:1d.0 USB Controller: Intel Corp.: Unknown device 24d2 (rev 02) (prog-if 00 [UHCI])
Subsystem: Dell Computer Corporation: Unknown device 0157
Flags: bus master, medium devsel, latency 0, IRQ 16
I/O ports at ff80 [size=32]

00:1d.1 USB Controller: Intel Corp.: Unknown device 24d4 (rev 02) (prog-if 00 [UHCI])
Subsystem: Dell Computer Corporation: Unknown device 0157
Flags: bus master, medium devsel, latency 0, IRQ 19
I/O ports at ff60 [size=32]

00:1d.2 USB Controller: Intel Corp.: Unknown device 24d7 (rev 02) (prog-if 00 [UHCI])
Subsystem: Dell Computer Corporation: Unknown device 0157
Flags: bus master, medium devsel, latency 0, IRQ 18
I/O ports at ff40 [size=32]

00:1d.3 USB Controller: Intel Corp.: Unknown device 24de (rev 02) (prog-if 00 [UHCI])
Subsystem: Dell Computer Corporation: Unknown device 0157
Flags: bus master, medium devsel, latency 0, IRQ 16
I/O ports at ff20 [size=32]

00:1d.7 USB Controller: Intel Corp.: Unknown device 24dd (rev 02) (prog-if 20 [EHCI])
Subsystem: Dell Computer Corporation: Unknown device 0157
Flags: bus master, medium devsel, latency 0, IRQ 23
Memory at ffa80800 (32-bit, non-prefetchable) [size=1K]
Capabilities: [50] Power Management version 2
Capabilities: [58] #0a [20a0]

00:1e.0 PCI bridge: Intel Corp. 82801BA/CA/DB PCI Bridge (rev c2) (prog-if 00 [Normal decode])

Flags: bus master, fast devsel, latency 0
Bus: primary=00, secondary=02, subordinate=02, sec-latency=32
I/O behind bridge: 0000c000-0000cfff
Memory behind bridge: fe800000-fe8fffff

00:1f.0 ISA bridge: Intel Corp.: Unknown device 24d0 (rev 02)
Flags: bus master, medium devsel, latency 0

00:1f.1 IDE interface: Intel Corp.: Unknown device 24db (rev 02) (prog-if 8a [Master SecP PriP])
Subsystem: Dell Computer Corporation: Unknown device 0157
Flags: bus master, medium devsel, latency 0, IRQ 17
I/O ports at 01f0 [size=8]
I/O ports at 03f4
I/O ports at 0170 [size=8]
I/O ports at 0374
I/O ports at ffa0 [size=16]
Memory at febffc00 (32-bit, non-prefetchable) [size=1K]

00:1f.2 IDE interface: Intel Corp.: Unknown device 24d1 (rev 02) (prog-if 8f [Master SecP SecO PriP PriO])
Subsystem: Dell Computer Corporation: Unknown device 0157
Flags: bus master, 66Mhz, medium devsel, latency 0, IRQ 17
I/O ports at fe00 [size=8]
I/O ports at fe10 [size=4]
I/O ports at fe20 [size=8]
I/O ports at fe30 [size=4]
I/O ports at fea0 [size=16]

00:1f.3 SMBus: Intel Corp.: Unknown device 24d3 (rev 02)
Subsystem: Dell Computer Corporation: Unknown device 0157
Flags: medium devsel, IRQ 17
I/O ports at efe0 [size=32]

01:00.0 VGA compatible controller: ATI Technologies Inc Radeon R250 If [Radeon 9000] (rev 01) (prog-if 00 [VGA])
Subsystem: ATI Technologies Inc: Unknown device 4f72
Flags: bus master, stepping, 66Mhz, medium devsel, latency 64, IRQ 16
Memory at f4000000 (32-bit, prefetchable) [size=64M]
I/O ports at de00 [size=256]
Memory at fe9e0000 (32-bit, non-prefetchable) [size=64K]
Expansion ROM at fea00000 [disabled] [size=128K]
Capabilities: [58] AGP version 2.0
Capabilities: [50] Power Management version 2

01:00.1 Display controller: ATI Technologies Inc Radeon R250 [Radeon 9000] (Secondary) (rev 01)
Subsystem: ATI Technologies Inc: Unknown device 4f73
Flags: bus master, stepping, 66Mhz, medium devsel, latency 64
Memory at f0000000 (32-bit, prefetchable) [size=64M]
Memory at fe9f0000 (32-bit, non-prefetchable) [size=64K]
Capabilities: [50] Power Management version 2

02:01.0 Modem: Broadcom Corporation BCM4212 v.90 56k modem (rev 02) (prog-if 00 [Generic])
Subsystem: Dell Computer Corporation: Unknown device 0002
Flags: bus master, fast devsel, latency 64, IRQ 22
Memory at fe8fe000 (32-bit, non-prefetchable) [size=4K]
I/O ports at cf10 [size=16]
Capabilities: [40] Power Management version 2

02:02.0 Multimedia audio controller: Creative Labs [SB Live! Value] EMU10k1X
Subsystem: Creative Labs: Unknown device 1003
Flags: bus master, medium devsel, latency 64, IRQ 17
I/O ports at cf20 [size=32]
Capabilities: [dc] Power Management version 2

02:02.1 Input device controller: Creative Labs [SB Live! Value] Input device controller
Subsystem: Creative Labs: Unknown device 1003
Flags: bus master, medium devsel, latency 64
I/O ports at cf08 [size=8]
Capabilities: [dc] Power Management version 2

02:08.0 Ethernet controller: Intel Corp.: Unknown device 1050 (rev 02)
Subsystem: Dell Computer Corporation: Unknown device 0157
Flags: bus master, medium devsel, latency 64, IRQ 20
Memory at fe8ff000 (32-bit, non-prefetchable) [size=4K]
I/O ports at cf40 [size=64]
Capabilities: [dc] Power Management version 2

[ckapsl]

The above seems to say that an Ethernet controller from Intel was found but it was not recognized. And finally, the result of ifconfig:

lo Link encap:Local Loopback
inet addr:127.0.0.1 Mask:255.0.0.0
UP LOOPBACK RUNNING MTU:16436 Metric:1
RX packets:4 errors:0 dropped:0 overruns:0 frame:0
TX packets:4 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:200 (200.0 b) TX bytes:200 (200.0 b)

Thanks in advance for your ideas.

I found that Intel has a web page for Linux drivers: http://www.intel.com/support/network...linux/e100.htm

[Stephen]

Try ifconfig -a to see if the card is there but not configured if so try sudo modprobe eepro100 to load the module for the card. To see if the module was/is loaded lsmod if the module loads then netcardconfig to configure the card.