the sound does not fix after it is configured

Good morning. I have installed KNOPPIX5.0.1 on the HD. I have configured the sound with #alsaconf #alsamixer #alsactl store and the sound was perfect. However, whenever I restart the system the sound crashes and the system is mute. I have chosen the ALSA ARCHITECTURE on the hardware option on the KCONTROL. I have also tried #chmod 666 /dev/dsp, #chmod 666 /dev/mixer #chmod 666 /dev/snd and these procedures did not help either. My sound card is a CREATIVE SB LIVE and the result of #lspci is the following:

cezar@ubuntu:~$ lspci
00:00.0 Host bridge: nVidia Corporation nForce2 AGP (different version?) (rev c1)
00:00.1 RAM memory: nVidia Corporation nForce2 Memory Controller 1 (rev c1)
00:00.2 RAM memory: nVidia Corporation nForce2 Memory Controller 4 (rev c1)
00:00.3 RAM memory: nVidia Corporation nForce2 Memory Controller 3 (rev c1)
00:00.4 RAM memory: nVidia Corporation nForce2 Memory Controller 2 (rev c1)
00:00.5 RAM memory: nVidia Corporation nForce2 Memory Controller 5 (rev c1)
00:01.0 ISA bridge: nVidia Corporation nForce2 ISA Bridge (rev a4)
00:01.1 SMBus: nVidia Corporation nForce2 SMBus (MCP) (rev a2)
00:02.0 USB Controller: nVidia Corporation nForce2 USB Controller (rev a4)
00:02.1 USB Controller: nVidia Corporation nForce2 USB Controller (rev a4)
00:02.2 USB Controller: nVidia Corporation nForce2 USB Controller (rev a4)
00:08.0 PCI bridge: nVidia Corporation nForce2 External PCI Bridge (rev a3)
00:09.0 IDE interface: nVidia Corporation nForce2 IDE (rev a2)
00:0d.0 FireWire (IEEE 1394): nVidia Corporation nForce2 FireWire (IEEE 1394) Controller (rev a3)
00:1e.0 PCI bridge: nVidia Corporation nForce2 AGP (rev c1)
01:07.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8169 Gigabit Ethernet (rev 10)
01:08.0 Multimedia audio controller: Creative Labs SB Audigy LS
01:09.0 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev 50)
01:09.1 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev 50)
01:09.2 USB Controller: VIA Technologies, Inc. USB 2.0 (rev 51)
01:0a.0 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev 50)
01:0a.1 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev 50)
01:0a.2 USB Controller: VIA Technologies, Inc. USB 2.0 (rev 51)
01:0b.0 RAID bus controller: Silicon Image, Inc. SiI 3112 [SATALink/SATARaid] Serial ATA Controller (rev 02)
02:00.0 VGA compatible controller: nVidia Corporation NV36 [GeForce FX 5700LE] (rev a1)
cezar@ubuntu:~$

My mother board is a ABIT AN7 and I have DISABLED on BIOS the sound on board detection. After the fist time the configured sound crashed I set it to ABLED and the same happened.

Thanks for your attention.
I hope I solve this unpleasant problem because I simply ADORE Knoppix.
Cezar Rangel

[cezar]

The problem with the sound has been solved.I just inserted the references to the module snd_usb_sound and snd_usb_lib to the file /etc/modprobe.d/blacklist and everything is perfect with my knoppix now Smile there is also an excellent suggestion on the following link : http://www.knoppix.net/forum/viewtop...+configuration
I thank you all that have at least read my post. Merry Christmas for you all. Cezar