Check out this link.Originally Posted by Gregwithoneg
http://www.freenet.org.nz/misc/knoppix-install.html
Paul
Myself and my learned friend have embarked on a mission to try out Linux, and we have to say how significant Knoppix is as an addition to the catalogue of Opertaing Systems.
Just one question however, of many.
How does one install Knoppix to the systems Hard Drive?
If possible, can it be setup to dual boot.
Thats two questions soz.
Check out this link.Originally Posted by Gregwithoneg
http://www.freenet.org.nz/misc/knoppix-install.html
Paul
Buy the way it is possible to dual boot.
Check out the doc's section of this site
paul
There is a guide here and a search of the forum will provide you with many of the answers you will need.
Whenever I have installed with Knoppix, the hdinstall script has automatically configured lilo to be able to boot operating systems on other partitions. I think this was broken in some previous versions of the hdinstall script, but I believe that it has been fixed for some time now.
As the heading suggests, we have succesfully installed, although not without problems.
First thing is that we now cannot see our hard drives except the partition that knoppix is on.
We cannot connect to the Internet via broadband.
We did however get a connection the first time we rebooted Linux but none since. It hangs when trying to configure the eth0 and then fails.
We are using an AEI fast ethernet adaptor.
Hope someone has a suggestion.
I am GregwithoneG's associate. I am posting immediately after G's post because whoever reads this might be suprised to learn that we have just done the first Linux boot this morning (UK Time) and guess what? We have net!
No idea whats going on here . I simply used Scroll/Lock to monitor the boot up and there was no mention of initializing the eth0.. (What we could see at least)
G has informed me that when he is in Linux (and searching for clues) he found a usb viewer under applications/tools and he sees this message-:
cannot open the file /proc/bus/usb/devices
Verify that you have usb compiled into your kernel,
have the usb modules loaded/ and haven the usbdevfs filesystem mounted.
In fact I copied it word for word as it appears right now. Yet I have access. I know I shouldn't complain cos we now have access, but the problem is that we have no idea if we are going to have access each boot.
Has anyone any suggestions?
Dell PowerEdge M610 Blade Server E5620@2.2GHZ (6x)8GB RAM (2x)146GB 15K SAS HDD
$75.00
Dell PowerEdge FX2 FX2S Enclosure - 4x PowerEdge FC640 w/ 8x Gold 6132 112C 1TB
$2294.99
Dell PowerEdge FX2 FX2S Enclosure - 4x PowerEdge FC640 w/ 8x Gold 6134 64C 1TB
$3299.99
Cisco UCS 5108 Blade Server Chassis Enclosure 8x B200 M4 16x E5-2640v3 128gb
$599.99
HP ProLiant BL460c G8(Gen8) 2x 8 CORE E5-2670 2.6GHz 192GB RAM 2x 146GB SAS HDD
$78.00
DELL M630 BLADE SERVER x2 XEON E5-2660V3 @ 2.6GH H730 PERC HDD CADDIES 16GB FC
$50.00
DELL POWEREDGE M620 Blade 2x Xeon E5-2670 2.5GHz 128GB 2x300GB HDD
$94.50
Dell PowerEdge M1000e (BMX01) Server Enclosure w/ 16-PowerEdge M610 Blade Server
$899.99
Dell PowerEdge FX2s CTO Blade 4 Slot 2U Chassis 2x 2000W
$349.00
Dell PowerEdge M620 Blade Server
$39.99