-
Junior Member
registered user
how do I force detection of my PCMCIA modem?
I've checked using lsmod and the pcmcia_core isn't loaded. I can
load it using modprobe but I'm kinda stuck as to where to go from there.
If I go to KPPP I can't seem to get it to see my modem.
I'm afraid that my installation (on hd) was complicated because I used
"nopcmcia" in order to boot from CD (as with Transmeta notebooks my
Sony micro-laptop uses a funky PCMCIA modem). So I did the "ide2=0x180 nopcmcia" option.
Anyway, I want to (1) be able to force the detection of new PCMCIA
devices on my laptop (I have at least three cards I want to be able to
use at various times - a Fast Ethernet card, a wireless Orinoco card, and my New Media 56k modem).
I've checked the Docs section of the site and haven't found a lot on PCMCIA modems or on forcing hardware detection post-hd install.
Can anyone offer a pointer to docs or some direct advice on the issue?
I promise to write it up in a HOWTO and add it to the WIKI once I figure out how to do this (if it hasn't already been done and I missed it).
Thanks!
Stefan
I have the May 3 distribution of Knoppix 3.2.
-
Senior Member
registered user
Re: how do I force detection of my PCMCIA modem?
Originally Posted by
stefan_isaacs
I've checked using lsmod and the pcmcia_core isn't loaded. I can
load it using modprobe but I'm kinda stuck as to where to go from there.
If I go to KPPP I can't seem to get it to see my modem.
I'm afraid that my installation (on hd) was complicated because I used
"nopcmcia" in order to boot from CD (as with Transmeta notebooks my
Sony micro-laptop uses a funky PCMCIA modem). So I did the "ide2=0x180 nopcmcia" option.
Anyway, I want to (1) be able to force the detection of new PCMCIA
devices on my laptop (I have at least three cards I want to be able to
use at various times - a Fast Ethernet card, a wireless Orinoco card, and my New Media 56k modem).
I've checked the Docs section of the site and haven't found a lot on PCMCIA modems or on forcing hardware detection post-hd install.
Can anyone offer a pointer to docs or some direct advice on the issue?
I promise to write it up in a HOWTO and add it to the WIKI once I figure out how to do this (if it hasn't already been done and I missed it).
Thanks!
Stefan
I have the May 3 distribution of Knoppix 3.2.
As far as I know, PCMCIA system needs three modules :
1. pcmcia_core
2. yenta_socket or tcic or i86365(check the actual file name), depends on what chipset etc. is used for the PCMCIA hardware
3. cardmgr(a program, not module)
after loading these three, it is a matter of modifying the files under /etc/pcmcia so the correct device driver(for the PCMCIA device inserted) would be loaded.
-
Junior Member
registered user
nearly there.. now just a PPP problem
I think I'm nearly there. I went to /etc/init.d and fired up the pcmcia service (and thus got the yenta thingie and cardmgr). I was able to find the modem and configure it from KPPP and dial out.
I get a solid connection and then I get the notice that my computer is starting pppd. But pppd times out and kills itself. Any ideas as to why?
I was thinking the pppd daemon should already be running, but I don't
know where to begin looking for it.
Maybe I'm misconfigured?
thanks for the help!
cheers,
S.
Similar Threads
-
By AlBorland in forum Laptops
Replies: 0
Last Post: 08-30-2004, 09:40 AM
-
By beecee in forum Hardware & Booting
Replies: 1
Last Post: 03-16-2004, 11:58 PM
-
Replies: 2
Last Post: 11-25-2003, 12:21 PM
-
By borisp71 in forum Networking
Replies: 1
Last Post: 08-17-2003, 04:52 AM
-
By moosedaddy in forum Hardware & Booting
Replies: 2
Last Post: 01-24-2003, 02:53 AM
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
A-Tech 8GB DDR3 1600 PC3-12800 Laptop SODIMM 204-Pin Memory RAM PC3L DDR3L 1x 8G
$13.99
HyperX FURY RAM DDR4 16GB 8GB 32GB 4GB 3200 2666 2400 2133 Desktop Memory DIMM
$9.64
A-Tech 8GB PC3-12800 Desktop DDR3 1600 MHz Non ECC 240-Pin DIMM Memory RAM 1x 8G
$13.99
CRUCIAL DDR3L 8GB 16GB 32GB 1600 MHz PC3-12800 Laptop Memory RAM SODIMM 204-Pin
$14.35
Team T-FORCE VULCAN Z 16GB (2 x 8GB) 288-Pin PC RAM DDR4 3200 (PC4 25600) Intel
$35.99
A-Tech 16GB 2 x 8GB PC3-12800 Laptop SODIMM DDR3 1600 Memory RAM PC3L 16G DDR3L
$27.98
A-Tech 16GB 2x 8GB PC3-12800 Desktop DDR3 1600 MHz 240pin DIMM Memory RAM 16G 8G
$27.98
HMT84GL7AMR4C-RD 32GB DDR3 Server Memory RAM 14900L ECC REG 4Rx4 SK Hynix Cisco
$13.99
Hynix 64GB 4Rx4 PC4-2133P-L LRDIMM DDR4-17000 ECC Load Reduced Server Memory RAM
$64.99
A-Tech 32GB 2x 16GB PC4-25600 Laptop SODIMM DDR4 3200 MHz Non-ECC Memory RAM 32G
$59.99