is it just :
lilo -C (path of your lilo.conf)
after you boot into KNOPPIX CD ? Of course, you need to change the content of lilo.conf to match your HD settings.
Without further information, not much I can think of.
Hi!
I installed both Knoppix and Windows and it worked.
I cloned the HD and the copy didn't work. Lilo crashed.
So I installed another boot-loader and now only windows is bootable.
How can I install lilo again? I have access to lilo.conf via Knoppix-CD.
is it just :
lilo -C (path of your lilo.conf)
after you boot into KNOPPIX CD ? Of course, you need to change the content of lilo.conf to match your HD settings.
Without further information, not much I can think of.
What I usually do is,
boot to knoppix cd
mount the hd partition ex: mount /dev/hda2 /mnt/hda2
(use the proper device for your partition)
chroot to the partition, chroot /mnt/hda2
then edit /etc/lilo.conf with your favorite editor
then run /sbin/lilo -v
HTH
rock
Mount the partition that contains /etc/lilo.conf make any changes necessary to lilo.conf then sudo chroot /mnt/hd?? /sbin/lilo -v to commit lilo to the MBR. replace ?? with correct drive letter and partition number you mounted.Originally Posted by Sebastian
DELL PowerEdge R730XD 24x 2.5" Server Dual 750W Dual Heatsink - BareBones TESTED
$269.99
Dell PowerEdge R620 Server 2x E5-2660 v1 2.2GHz 16 Cores 256GB RAM 2x 300GB HDD
$89.99
Dell PowerEdge R720XD Xeon E5-2680 V2 2.8GHz 20 Cores 256GB RAM 12x4TB
$510.00
Dell PowerEdge R730XD 28 Core Server 2X Xeon E5-2680 V4 H730 128GB RAM No HDD
$389.99
Dell PowerEdge R720 Server - 2x8c CPU,256Gb RAM, 128Gb SSD/3x900Gb SAS, Proxmox
$340.00
DELL POWEREDGE T430 SERVER W/ DUAL XEON E5-2609 CPU & 16GB MEMORY
$329.00
CTO Dell PowerEdge R630 Server, 2x Xeon E5-2620V4, 64GB- 512GB RAM, 480GB SSDs
$246.67
Dell PowerEdge R620 Server 2x E5-2650 V2 = 16 Cores H710P 128GB RAM 2x 600GB SAS
$274.99
DELL PowerEdge R730 Server 2x E5-2690v3 2.6GHz =24 Cores 32GB H730 4xRJ45
$274.00
Dell Poweredge R730xd 2.5in 2x E5-2690 v3 2.6ghz 24-Cores 64gb H730 2x 750w
$289.99