is it just :
lilo -C (path of your lilo.conf)
after you boot into KNOPPIX CD ? Of course, you need to change the content of lilo.conf to match your HD settings.
Without further information, not much I can think of.
Hi!
I installed both Knoppix and Windows and it worked.
I cloned the HD and the copy didn't work. Lilo crashed.
So I installed another boot-loader and now only windows is bootable.
How can I install lilo again? I have access to lilo.conf via Knoppix-CD.
is it just :
lilo -C (path of your lilo.conf)
after you boot into KNOPPIX CD ? Of course, you need to change the content of lilo.conf to match your HD settings.
Without further information, not much I can think of.
What I usually do is,
boot to knoppix cd
mount the hd partition ex: mount /dev/hda2 /mnt/hda2
(use the proper device for your partition)
chroot to the partition, chroot /mnt/hda2
then edit /etc/lilo.conf with your favorite editor
then run /sbin/lilo -v
HTH
rock
Mount the partition that contains /etc/lilo.conf make any changes necessary to lilo.conf then sudo chroot /mnt/hd?? /sbin/lilo -v to commit lilo to the MBR. replace ?? with correct drive letter and partition number you mounted.Originally Posted by Sebastian
Dell PowerEdge R720 Server - 2x8c CPU,256Gb RAM, 128Gb SSD/3x900Gb SAS, Proxmox
$340.00
Supermicro 4U 36 Bay Storage Server 2.4Ghz 8-C 128GB 1x1280W Rails TrueNAS ZFS
$712.98
CSE-118 Supermicro 1U 3x GPU Server 2.6Ghz 20-C 128GB CX353A 2x1600W PSU Rails
$454.03
DELL PowerEdge R730XD 24x 2.5" Server Dual 750W Dual Heatsink - BareBones TESTED
$269.99
Intel Xeon E5-2680 v4 2.4GHz 35MB 14-Core 120W LGA2011-3 SR2N7
$17.99
Intel Xeon Gold 6140 SR3AX 2.3GHz 18-Core Processor CPU
$39.99
Intel Xeon E5-2680 v4 SR1N7 2.4GHz 14-Core 3.5MB 35MB Socket 2011-3 Server CPU
$11.99
Intel Xeon E5-2697A V4 2.6GHz CPU Processor 16-Core Socket LGA2011 SR2K1
$39.99
HP Workstation Z640 2x Xeon E5-2623V4 32GB Ram Dual 256GB SSD K420 Linux GA
$234.98
Rare WaterCooled HP Z800 Workstation Dual Xeon X5680 16GB RAM 120GB SSD Nvidia
$279.56