-
Junior Member
registered user
Built new computer and Live disk won't load
I built my first computer. Asus mother board(p5B) an intel core 2 duo 2.13(6400) and 1 dvd drive as master and a dvd burner as slave. I have 1 hard drive and its set up with a Sata cable. I put the disk in(or any other linux disk) and a screen comes up that says looking for knoppix or looking for mepis and then an error says halted can't load. I have xp on the computer right now. I tried to change the settings for the plug and play OS in the bios but that didn't work. I just tried the knoppix disk again and it said "CAN'T FIND KNOPPIX FILE SYSTEM".
-
Administrator
Site Admin-
We have seen some issues lately with new hardware, particularly when trying to boot from SATA. But since Knoppix doesn't need a hard disk at all and your SATA seems limited to the HD then I doubt that this is your issue. I suggest making sure that you have covered all of the steps in the downloading faq, particularly checking the md5 sum and slow burning speed (see answer #1 if you don't know where to find it).
---
Verifying of md5 checksum and burning a CD at slow speed are important.
-
Junior Member
registered user
thanks I will do some more reading. Maybe I need to change the bios settings. At first I couldn't even load any OS at all until I selected the ram speed in the bios.
-
Administrator
Site Admin-
Rechecking your BIOS settings is a fine thing to do, particularly if you tried to overclock or crank them up. but "CAN'T FIND KNOPPIX FILE SYSTEM" is an error we often see from discs that were not burnt following all of the tips in the downloading faq, particular the one about high speed burning. To a lesser extent it might be a DMA issue if the boot drive does not support DMA properly, but I don't expect that will be your problem (check any BIOS settings for DMA on the optical drives though). I still recommend following all of the instructions in the downloading faq. This isn't like religion, you can't pick and choose which teachings you want to follow and which you decide are unimportant. And don't skip over steps like the md5 check just because you never did one before.
-
Junior Member
registered user
But i didn't burn any of my Linux disk? I have used them all before and they always worked. The knoppix disk is a 4.0 and it came with a book I bought. i remember I had a bad hardrive and I just used knoppix for a month without turning off my box. maybe the disk is bad now. But that would mean that my mepis and my Ubuntu and knoppix disks all went bad at the same time. I have tried 4 different drives. i know its not a drive problem. I was watching movies and burning with them last night. it could be an evil plot by Mr Gates to get me to buy Vista. Seriously this sucks.
-
Administrator
Site Admin-
I'm not following what you are saying. are you saying that theses 3 different Linux Live CDs all worked on this same computer as recently as last night, but now none work today on the same computer? iIf so, what changed?
---
Verifying of md5 checksum and burning a CD at slow speed are important.
-
Junior Member
registered user
My brand new computer that i just made will not work with anything linux for some reason. i was able to load windows xp on it, but when I try to load a live cd/dvd or try to install any of them they will start to load then I get an error that says halted knoppix or unable to find file system for linux(either mepis or knoppix). It sound strange but these factory made disks will not work with this box. This new one I made never worked with knoppix or any linux.
-
Administrator
Site Admin-
Originally Posted by
coffey7
... maybe the disk is bad now. But that would mean that my mepis and my Ubuntu and knoppix disks all went bad at the same time. I have tried 4 different drives. i know its not a drive problem. I was watching movies and burning with them last night.....
I'm really having a hard time following what you are saying. Is it only this new system that isn't working and has never worked with any Linux Live CD? Have you tried the discs in the computer that they worked in last night? There are a number of things that you should be trying at this point. One suggestion would be to put that Knoppix disc in the new system, boot it, and at the boot prompt type memtest. Let it run a few passes of memtest86 (maybe even overnight if it doesn't fail right away).
---
Verifying of md5 checksum and burning a CD at slow speed are important.
-
Junior Member
registered user
I did the memtest with a ubuntu live cd. it worked and the memory is fine. windows runs fine on the new system. Its just when I try to load any linux system live or install. these disks have worked before on all my other computers. I put the live disk into the drive(I tried 4 different ones) and I restart. its starts to load the disk os. then during the install ubuntu locks up, mepis says halted can't find file system. and knoppix says can't find file system. I will try again and type what it says word for word.
-
Junior Member
registered user
Here is the message I get.
Can't find Knoppix file system, sorry
Dropping you to a (very limited shell).
press reset to quit
additional built in commands avaliable
cat mount unmount
insmod rmmod ismod
KNOPPIX#_
Similar Threads
-
By dealrocker in forum Hardware & Booting
Replies: 2
Last Post: 10-30-2009, 07:32 AM
-
By erdemevin in forum Hardware & Booting
Replies: 0
Last Post: 02-27-2009, 03:11 PM
-
By nadavvin in forum General Support
Replies: 1
Last Post: 06-12-2006, 10:07 AM
-
By Mr.Jack in forum General Support
Replies: 8
Last Post: 02-21-2005, 12:53 PM
-
By ikings94 in forum Networking
Replies: 3
Last Post: 11-20-2003, 04:39 AM
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
Supermicro X10SRW-F Server
$169.99
1U Supermicro Server 10 Bay 2x Intel Xeon 3.3Ghz 8C 128GB RAM 480GB SSD 2x 10GBE
$297.00
HP ProLiant Xeon E3-1220L V2 MicroServer Gen8 2.30 GHz 16 GB RAM NO DRIVES
$199.99
HPE ProLiant MicroServer Gen10 Plus v2 Ultra Micro Tower Server - 1 x Intel Xeon
$846.19
HPE ProLiant MicroServer Gen8 Intel Xeon E3-1265L 16GB ECC PCIe x16 4x1TB HDD
$249.99
SuperMicro Server 505-2 Intel Atom 2.4GHz 8GB RAM SYS-5018A-FTN4 1U Rackmount
$202.49
HP ProLiant HSTNS-5151 Micro Server 8GB RAM No Drives/Key/Caddies *READ*
$94.99
Supermicro 5018A-FTN4 Rack Server - Black
$125.00
SUPERMICRO CSE-512 AMD Opteron Processor 6128, 32GB DDR3 RAM NO HDD
$90.00
1U 20" Short Depth Server Firewall PFSense X11SSH-F Xeon 3.5Ghz 32GB RAM NVME
$247.00