I have the same problem and have been looking around for the answer. I will post it when I fix the problem. I am going on an all out search for the answer.
I am a very new user to KNOPPIX and am seeking help. One of the latest topics on the forum about "can't find KNOPPIX filesystem" is also happening to me. I use KNOPPIX daily and have it installed on hard drives and also run it daily from a CD. Over the past 6 months I have never seen this error until I started building PC's with the Intel DG965RY motherboard. I believe this problem is some type of conflict with the Intel chipset. I have seen this problem discussed on the Intel forum and there are several Intel motherboards having the same problem. An Intel rep suggested a BIOS update for Linux but that didn't help. I am hoping you have some suggestions. We are going to check and possibly reburn the CD but I have my doubts about that helping. I have built nearly 150 PC's in the last 6 months using the same CD's, versions 3.7 and 5.0. We also tried the latest 5.1.1. All versions give the same error message.
I have the same problem and have been looking around for the answer. I will post it when I fix the problem. I am going on an all out search for the answer.
with your latest new Intel board, did you also change cd-drive type ?
that's the more important piece of info needed.
if not, then def something with the board
or cheatcodes... after 150 systems, have you had time or need to play with various codes ?
I've not, so I can't help apart from nodma might help, without non-std ide interface drivers
code for use plain ide ? atapicd for one
can you get a dos screen for a lspci ?
All 150 systems are identical except for the motherboard. I have tried some codes like nodma but they don't help.
After the error occurs I am stuck in the KNOPPIX shell with limited commands.
did you try disabling any advanced hardware detection and try to boot .. maybe booting the expert mode might help
ok, same deal but slightly different tack
all systems are identical
apart from ....... serial numbers on the cd-rom drives
might be the same type of drive
but won't be the same drive (unless you are building off a test bench)
can you swap the drive and re-test ?
might be a dud cd-drive
me mums dvd half booted the cd
got the splash screen, and most of the startup
but no desktop
then i found it wouldn't play a dvd either
new drive
very finicky when going kaput
Yes, I have tried the Expert code along with different CD drives. I have seen this issue discussed elsewhere and I am leaning towards the problem being the Intel chipset. I guess if that is truly where the problem lies then either Linux or Intel will find a fix.
I was getting the knoppix file system error when trying to use a DVD burner as my primary. I changed to a normal DVD drive, and it worked. That was the only thing I changed. Hope that is all it takes for everyone else.
Dell Precision 5810 Workstation Xeon E5-1650 6C 3.5GHz 16GB 500GB Win10 K2200
$115.94
Intel Xeon E5-2699A V4 2.40GHz 55MB 22 Core 9.6GT/s 145W CPU Processor SR30Y
$189.99
Intel Xeon E5-2698 V4 2.20GHz 50MB 20 Core 9.6GT/s 135W CPU Processor SR2JW
$84.99
E5-2699V4 Intel Xeon Processor 55M Cache, 2.20 GHz SR2JS CM8066002022506
$155.00
Intel Xeon E5-2680 V4 CPU 2.4~3.3GHz 14-Core 35M LGA 2011-3 R3 Server SR2N7 120W
$15.99
Intel Xeon X5690 SLBVX 3.46GHz 6-Core 12MB 6.4GT/s LGA1366 CPU Processor
$20.00
Intel Xeon E5-2680 V3 2.50Ghz 12 Core 30MB Cache LGA 2011-3 CPU SR1XP Tested
$5.90
Intel Xeon Gold 6138 2.0GHz 27.5MB 20-Core 125W LGA3647 SR3B5
$37.00
Dell Poweredge R630 2x Xeon E5-2680 v4 2.4ghz 28-Cores / 128gb / H330 / 2x 1TB
$324.99
Dell PowerEdge R630 Server 2x E5-2680 V4 = 28 Cores S130 32GB RAM NEW 480GB SSD
$256.99