Helllo there,
thanks to Knoppix and these forums I have a working installation of Debian. Very nice and quick it is too.
Some issues.
Query 1
Network card not starting automatically. However, after boot if I use netcardconf or ifup to start it, it then works fine. /etc/network/interfaces has the following apropriate lines
auto lo eth0
iface lo inet loopback
iface eth0 inet dhcp
Query 2
I have a Toshiba 6000 Satellite Pro laptop.
In all the Linuxes(?) I have put on it the keyboard repeat mode is too fast so that extra characters are always inserted. More of a problem in console. How do i slow this??
Query 3
Usually if I switch to console (CTRL-ALT-F1) from X, X crashes out and either dumps me at login manager or console prompt, depending on where it was started. Again this is not Knoppix specific or even machine specific. But it is highly annoying.
Thanks for any help in advance
Richard
Dell Poweredge R640 Server | 2x Silver 4114 20 Cores | 96GB | 8x 1.8TB Dell SAS
$2749.99
Dell PowerEdge R720XD Xeon E5-2680 V2 2.8GHz 20 Cores 256GB RAM 12x4TB
$510.00
Dell PowerEdge R620 Server 2x E5-2660 v1 2.2GHz 16 Cores 256GB RAM 1x 300GB HDD
$89.99
Dell PowerEdge R730, 2 sinks, SystemBoard, 8 trays,H330,Idrac 8 exp, 2x750w Psu
$135.00
Dell PowerEdge R730XD 28 Core Server 2X Xeon E5-2680 V4 H730 128GB RAM No HDD
$389.99
Dell Poweredge R730xd 2.5in 2x E5-2690 v3 2.6ghz 24-Cores 64gb H730 2x 750w
$189.99
Dell PowerEdge R720 Server - 2x8c CPU,256Gb RAM, 128Gb SSD/3x600Gb SAS, Proxmox
$360.00
DELL POWEREDGE T430 SERVER W/ DUAL XEON E5-2609 CPU & 16GB MEMORY
$329.00
DELL PowerEdge R630 8SFF Server 2x E5-2690v3 2.6GHz =24 Cores 32GB H730 4xRJ45
$254.00
DELL PowerEdge R730 Server 2x E5-2690v3 2.6GHz =24 Cores 32GB H730 4xRJ45
$274.00