-
more internet connection problems
hi,
i'm new to knoppix.net
here's what i'm starting with--i have run the knoppix 4.0.2 distro live and liked it so much i decided to install it on one of my several partitions. i had initially partitioned the hda drive using partition magic, installed in the win xp partition, hda1, then used knoppix live to re-partition it with qtparted, which i now prefer.
the computer i'm using is a compaq presario laptop 3 1/2 years old with a 40 gb hd. i also have a desktop imac g5. both are attached by cable to a dlink dl-450 wireless router from which i removed the antenna. the router is connected to a dlink dsl-300g adsl modem which receives its dsl signal thru a telephone line.
i can connect to the internet with the partitioned laptop if i choose the win xp partition, but not thru the knoppix partition. i can also connect to the internet with the imac g5. the 2 computers are not networked (yet).
in the knoppix partition, i go to control center and choose "internet & network connections". of the 8 choice there the only one relevant seems to be "local network browsing", which has 3 tabs--"windows shares", "Lisa daemon" and "lan: i/o slave". i fill each in to the best of my knowledge and click "apply" for each.
upon completion i receive a message that the config file is saved to /etc/lisarc, and that i should go to
http://lisa-home.sourceforge.net for exampleas of a script i have to write before i can connect. here's where i'm at a standstill--connecting to the internet has never been this hard. my knowledge of the command language is minimal, but more importantly--i don't know if i should even be trying to work with the Lisa daemon.
can anybody help? i need a step-by-step procedure starting with "internet & network connections".
if i get this one solved, i'll be back for more help configuring a triple-boot (and beyond) system with the above two os's and several more linux distos on a total of 6 partitions (win xp is in a 10gb partition, followed by a 1 gb linux-swap, a 5 gb knoppix partition and 3 more ext2 formatted 5 gb partitions)
thanks.
-
hi again,
please disregard my earlier post describing the problem.
the solution was so simple i must apologize: enter--
knoppix--->network/Internet--->network card configuration
2 ethernet choices are given, eth0 and eth1. if the first choice doesn't connect to the internet, try the second choice and -presto!
connected!
thanks anyway.
Similar Threads
-
By ipse in forum Networking
Replies: 1
Last Post: 02-10-2007, 12:20 AM
-
By bobalot in forum MS Windows & New to Linux
Replies: 0
Last Post: 01-20-2006, 10:24 PM
-
By zombie3000 in forum MS Windows & New to Linux
Replies: 4
Last Post: 12-26-2005, 04:35 AM
-
By Tine in forum Networking
Replies: 1
Last Post: 07-18-2005, 05:32 PM
-
By emilia in forum Networking
Replies: 1
Last Post: 08-28-2004, 02:10 AM
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
1U Supermicro Server 10 Bay 2x Intel Xeon 3.3Ghz 8C 128GB RAM 480GB SSD 2x 10GBE
$297.00
HPE ProLiant MicroServer Gen8 Intel Xeon E3-1265L 16GB ECC PCIe x16 4x1TB HDD
$249.99
HP ProLiant Xeon E3-1220L V2 MicroServer Gen8 2.30 GHz 16 GB RAM NO DRIVES
$199.99
SuperMicro Server 505-2 Intel Atom 2.4GHz 8GB RAM SYS-5018A-FTN4 1U Rackmount
$202.49
HP ProLiant HSTNS-5151 Micro Server 8GB RAM No Drives/Key/Caddies *READ*
$94.99
HPE ProLiant MicroServer Gen10 Plus v2 Ultra Micro Tower Server - 1 x Intel Xeon
$846.19
Supermicro 5018A-FTN4 Rack Server - Black
$125.00
Microsel Server Tower Supermicro X10SAE E3-1275 V3 @3.5GHz 16GB 509849-001
$149.99
SUPERMICRO CSE-512 AMD Opteron Processor 6128, 32GB DDR3 RAM NO HDD
$90.00
1U 20" Short Depth Server Firewall PFSense X11SSH-F Xeon 3.5Ghz 32GB RAM NVME
$247.00