Knoppix "sees" the card during the autoconfiguration.
But, when it tries to load the e1000.o module it says it can't find the card. "No such device"
Perhaps there is a newer driver. Also the video doesn't detect but that is fixed in the latest CVS of XFree86.
The system is as follows:
Dell Optiplex GX260
Pentium 4 1.8Ghz
256MB DDR
Intel 845GL (Brookdale-G) with onboard video
Intel Pro/1000 MT PCID: 8086:100e
SBLive Value 5.1
ISA Riser board.
DELL PowerEdge R630 8SFF Server 2x E5-2680v4 2.4GHz =28 Cores 128GB H730 4xRJ45
$339.00
Dell Poweredge R630 Server 2x E5-2620 V4 =16 Cores | S130 | 32GB RAM | 2x trays
$171.99
Dell PowerEdge R630 Server 2x E5-2680 V4 = 28 Cores S130 32GB RAM NEW 480GB SSD
$256.99
DELL PowerEdge R730 Server 2x E5-2680v3 2.5GHz =24 Cores 32GB H730 4xRJ45
$247.00
Dell PowerEdge R630 Server 2x E5-2640v3 2.60Ghz 16-Core 64GB H330
$182.65
HP ProLiant DL360 G9 Server 2x E5-2690v3 2.60Ghz 24-Core 256GB P440ar
$302.90
Dell PowerEdge R730XD Server 2x E5-2680 V3 2.50GHz = 24 Core 256GB DDR4 H730
$519.00
Lenovo ThinkServer TS140 Xeon E3-1225v3 3.20GHz 16GB RAM Tower Server Needs HDD
$99.99
Dell PowerEdge R720 2U Server 2x Xeon E5-2670 2.60GHz 256GB RAM NO HDD NO OS
$219.99
Cisco UCS C240 M4 2U Server w/ 2x E5-2680v4, NO RAM
$39.99