OK, if it was me, at this stage I would re-install the Knoppix system from the live CD | DVD (booting with the testcd cheatcode), configure rebuildfstab and ensure hal is running as described in http://www.knoppix.net/forum/viewtopic.php?t=26759
Yes1) Are you able to mount hda1 from the Live CD | DVD ?
None useful to this that I see...if you run whichever of gparted and|or qtparted is on your Knoppix, or a GParted Live CD, does that give any more information?
OK, if it was me, at this stage I would re-install the Knoppix system from the live CD | DVD (booting with the testcd cheatcode), configure rebuildfstab and ensure hal is running as described in http://www.knoppix.net/forum/viewtopic.php?t=26759
When I ran testcd I it said that the kernel image could not be found. I don't understand how this could be when the cd runs so beautifully? And other than not being able to mount my Windoze partition I have no complaints about the hard-disk install from it. I've used it about a month? But I guess I must have a bad download. I guess, I'm off to download the cd again :(
There is one test for the ISO that is never wrong, it will confirm a good or bad download: the md5 checksum. If it is right you don't need to do another download and will gain nothing in doing so.Originally Posted by Israel
There is a chance that a bad burn or bad media resulted in a bad disc that the md5 checksum would not catch. Testcd might or might not catch this. But it's not the right tool for deciding if you had a bad download.
---
Verifying of md5 checksum and burning a CD at slow speed are important.
Hi Israel:
You seem to be having the same problems I faced JohnnyH and HarryKuhman both have posted here
http://www.knoppix.net/forum/viewtopic.php?t=26802
My Knoppix DVD checks out fine with Md5Sum using testCD. I find this problem to be mostly since this HAL has appeared. I had teh same problem with PC-BSD installation. You can mount hd1 WinXp or any other with as root
root/ mount /media/hda1 then use the Icons on the desktop to open up in Knoqueror. While I think Knoppix 5.1.1 to be lot better than 4.0 I find wierd stuff like GRUB appearing late and booting taking time to start frequently to be odd.
Sorry I cant give you any suggestions
AJ
root/ mount /media/hda1 doesn't work for me buddy. Thanks for the suggestion though. I just downloaded another copy of Knoppix 5.1 and the checksum matched perfectly. I should be able to set it all back up tonight. If it doesn't work, you'll definitely be hearing back from me.
Dell PowerEdge R730 2x E5-2699V3 2.3Ghz 36 Core 128GB RAM H730 X520-I350 2x750W
$329.99
Dell PowerEdge R630 Server 2x E5-2680 V4 = 28 Cores S130 32GB RAM NEW 480GB SSD
$197.99
Dell Poweredge R730xd LFF 14-Bay 2U Server | Choose Your CPU & RAM Config
$489.99
Dell Poweredge R630 Server 2x E5-2620 V4 =16 Cores | S130 | 32GB RAM | 2x trays
$159.99
Dell PowerEdge R630 Server 2x E5-2640v3 2.60Ghz 16-Core 64GB H330
$182.65
1U Supermicro Server 10 Bay 2x Intel Xeon 3.3Ghz 8C 128GB RAM 240GB SSD 2x 10GBE
$259.00
Dell PowerEdge R720xd 26HDD 300gb 2.5-inch E5-2697 X 2CPU 384RAM 7.2 Tb HDD 
$180.00
Dell PowerEdge T620 8-Bay LFF Xeon E5-2660 0 2.20GHz 48GB NO HDD S110 Server
$174.99
HPE ProLiant DL360 Gen9 4LFF 2x E5-2667v3 3.2GHz =16 Cores 32GB P440AR 4xRJ45
$216.00
1U Server ( 4x VM's ) Hosting VPS Short Depth 20" 1U Xeon 3.5Ghz 16GB X10SLM-F
$149.00