I'm not a networking expert but think its stored under
/etc/init.d/networking
Hi all,
I am installing Gentoo, and using Knoppix to kick-start the install. I have managed to get to the point where I have to define all of the Networking Configuration in Gentoo. In Gentoo, according to the Install Handbook, everything is stored in /etc/conf.d/net. Unfortunately, Knoppix does not have an /etc/conf.d.My question is: where do I look in Knoppix for hints and how do I translate that into Gentoo-speak for all Networking.
Also important: I am currently installing on a box that is connected "directly to the Internet", through DHCP. I expect this one to be easy, as Knoppix detects everything without any trouble or input from me. I will be later doing this on a second box, where I first (under Knoppix) need to run the ADSL/PPPOE configuration - which works fine after I answer Yes to all questions, but where are the "results" stored.
Thank You.
I'm not a networking expert but think its stored under
/etc/init.d/networking
In case anyone is reading this, I found the answer to my question: the settings between the two are not compatible.Fortunately, Gentoo is well documented!
![]()
Dell R640 8x 2.5" SFF Server iDRAC - Wholesale Custom Build Your Server
$260.99
Dell PowerEdge R630 Server 2x E5-2697v3 2.60Ghz 28-Core 128GB H730P Rails
$295.00
Dell Poweredge R630 2x Xeon E5-2680 v3 2.5ghz 24-Cores 32gb 180GB SSD 495w
$169.99
Dell PowerEdge R730XD Server 2x E5-2620 V4=16 Cores | H330 | 32GB RAM | 2x trays
$258.99
Dell Poweredge R730 2x Xeon E5-2670 v3 2.3ghz 24-Cores 32gb H730 iDracEnt
$174.99
Dell PowerEdge R730 Server 8-Bay 2U 2x Intel E5-2670 v3 64GB PERC H730P No Caddy
$174.99
Dell PowerEdge R620 (2x) E5-2650 2.0Ghz 32GB RAM 256GB HDD- NO OS
$52.00
Dell PowerEdge R640 10x 2.5" 2x Gold 6132 2.6GHz 28-Cores 128gb H730p 2x 750w
$524.99
Dell R640 8x 2.5" SFF iDRAC 2x 25GbE SFP28- Wholesale Custom Build Your Server
$259.99
DELL R640 8SFF Server 2x Gold 6136 3.0GHz =24 Cores 128GB H730p 4xRJ45
$688.00