-
Where is all the networking configuration stored?
Hi all,
I am installing Gentoo, and using Knoppix to kick-start the install. I have managed to get to the point where I have to define all of the Networking Configuration in Gentoo. In Gentoo, according to the Install Handbook, everything is stored in /etc/conf.d/net. Unfortunately, Knoppix does not have an /etc/conf.d. My question is: where do I look in Knoppix for hints and how do I translate that into Gentoo-speak for all Networking.
Also important: I am currently installing on a box that is connected "directly to the Internet", through DHCP. I expect this one to be easy, as Knoppix detects everything without any trouble or input from me. I will be later doing this on a second box, where I first (under Knoppix) need to run the ADSL/PPPOE configuration - which works fine after I answer Yes to all questions, but where are the "results" stored.
Thank You.
-
Senior Member
registered user
I'm not a networking expert but think its stored under
/etc/init.d/networking
-
In case anyone is reading this, I found the answer to my question: the settings between the two are not compatible. Fortunately, Gentoo is well documented!
Similar Threads
-
By Béèm in forum Hardware & Booting
Replies: 0
Last Post: 09-16-2006, 09:47 AM
-
By isp in forum General Support
Replies: 0
Last Post: 10-12-2005, 02:50 PM
-
By isp in forum Hardware & Booting
Replies: 0
Last Post: 10-11-2005, 04:53 AM
-
By sci_fi in forum Customising & Remastering
Replies: 3
Last Post: 12-31-2004, 05:22 PM
-
By shadowen2 in forum General Support
Replies: 3
Last Post: 07-22-2003, 03:57 AM
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
HPE BL460c G9 ProLiant Blade | 2x Xeon E5-2620V3 | NO RAM | P244BR | 2xHDD Tray
$179.00
HPE BL460c G10 ProLiant Blade | 2x Silver 4110 | 16GB | P204I | 2x300GB 10KRPM
$1419.00
DELL PEM640 POWEREDGE M640 BLADE SERVER
$539.95
HP ProLiant BL460c G9 (Gen9) 2x E5-2670V3 12 Core 3.1GHz No Ram or No Drives
$59.98
Dell PowerEdge M620 0F9HJC Blade Server 2*E5-2670 2.60GHz 192GB RAM 2*300GB SAS
$103.99
2 x HP ProLiant BL460c (447707-B21) Blade Servers No RAM No HDD
$30.00
DELL M630 BLADE SERVER x2 XEON E5-2660V3 @ 2.6GH H730 PERC HDD CADDIES 16GB FC
$50.00
Dell PowerEdge M640 Blade Server
$539.95
Dell PowerEdge M620 Blade Server
$39.99
HP ProLiant BL460c Gen9 Blade 2x E5-2660v3 2.6GHz =20 Cores 64GB P246 650FLB
$196.00