I'm not a networking expert but think its stored under
/etc/init.d/networking
Hi all,
I am installing Gentoo, and using Knoppix to kick-start the install. I have managed to get to the point where I have to define all of the Networking Configuration in Gentoo. In Gentoo, according to the Install Handbook, everything is stored in /etc/conf.d/net. Unfortunately, Knoppix does not have an /etc/conf.d. My question is: where do I look in Knoppix for hints and how do I translate that into Gentoo-speak for all Networking.
Also important: I am currently installing on a box that is connected "directly to the Internet", through DHCP. I expect this one to be easy, as Knoppix detects everything without any trouble or input from me. I will be later doing this on a second box, where I first (under Knoppix) need to run the ADSL/PPPOE configuration - which works fine after I answer Yes to all questions, but where are the "results" stored.
Thank You.
I'm not a networking expert but think its stored under
/etc/init.d/networking
In case anyone is reading this, I found the answer to my question: the settings between the two are not compatible. Fortunately, Gentoo is well documented!
ORICO 5 Bay Raid USB3.0 to SATA External Hard Drive Enclosure for 3.5'' HDD US
$37.49
ORICO 5Bay Raid Hard Drive Enclosure USB3.0 to SATA for 3.5'' HDD SSD 150W Power
$70.12
LSI Logic Mega Raid 9750-24i4e 28-port SAS RAID Controller *USED*
$70.00
8 Bay UNAS RAID Array Case mITX 8GB RAM AMD Athlon 5350 ASRock AM1H-ITX Storage
$399.95
Adaptec - ASR-7805 6Gbs SAS- PCI EXPRESS 3.0 X8 -1GB Cache RAID Controller Card
$24.99
SUN/ ORACLE MegaRAID SAS 9361-8i 12Gb/s SAS /SATA RAID 1G Cache CARD 7085209
$29.99
Adaptec ASR 71605 16 Ports RAID 1GB Flash Cache Vault BBU w/ 2x SAS 3 to 4x SATA
$29.00
Dell PERC H200 8-Port 6GB/s SAS/SATA PCIE RAID Controller Card | 047MCV Tested
$14.95
Intel VROC Virtual RAID Upgrade Key (Standard) BD 5Module VROCSTANMOD J55901-103
$79.99
NEW LSI MegaRAID 9361-4I Raid Controller Card 4 ports + Cache Vault + Battery
$55.00