Best copy and paste the code 1:1 from the homepage. This way, you are getting the correct characters.
I am a newbie to Linux, I'm using Mepis 6.5, and I want to install klik-the commands given are as follows:
wget klik.atekon.de/client/install -0 [sh
What is the symbol before sh, I am using the key to the right of the p in lower case,the symbol looks like a vertical line in the install instructions, but my keyboard doesn't have that key so I thought it might be the one I'm using. Any help would be greatfully received. Thanks van
Best copy and paste the code 1:1 from the homepage. This way, you are getting the correct characters.
The symbol you need is the | (pipe symbol)
Seagate Exos X16 (7200RPM, 3.5", SATA III, 256MB Cache) 16TB Internal Enterprise
$110.00
Seagate ST8000NM0055 8TB 7200RPM 256MB SATA 6.0 Gb/s 3.5" Enterprise Hard Drive
$41.62
HITACHI HUS724040ALA640 4TB 7200RPM 64MB SATA 6.0Gb/s 3.5" HARD DRIVE ZERO HOURS
$52.00
Seagate ST1000VM002 1TB 64MB SATA6Gb/s 3.5" (Low Power) Hard Drive -PC, CCTV DVR
$24.99
HGST Ultrastar DC HC520 12TB SATA 6Gb 256MB 3.5" Enterprise HDD- HUH721212ALE601
$79.99
Seagate ST12000NM0127 12TB 256MB 7200RPM 3.5" SATA 6.0Gb/s Enterprise Hard Drive
$93.99
WD Ultrastar DC HC530 14TB SATA 6G 3.5" 7200RPM Enterprise HDD - WUH721414ALE604
$110.00
HGST Ultrastar HE10 10TB SATA 6.0Gb/s 7200 3.5" Datacenter HDD - HUH721010ALE601
$79.99
Western Digital 4TB Internal 7.2KRPM 3.5" (WD4000FYYZ) SATA Hard Drive ZERO HOUR
$69.99
Western Digital DC HC320 Ultrastar 8TB 7200RPM SATA HD, HUS728T8TALE6L4, 0B36404
$99.00