See my post #3 at:
http://www.knoppix.net/forum/threads...ht=persistence
Using Knoppix 6.4 I installed to hd from the Knoppix HD Install link under Preferences. All is working fine other than I cant get it to save changes. During setup there was no option for configuring save changes. Can someone give me directions. Thanks greatly!
See my post #3 at:
http://www.knoppix.net/forum/threads...ht=persistence
... you did "HD Installation", did you? Then you have a Debian like installation. It isn't an installation of Knoppix with compressed filesystem image and additional persistent memory.installed to hd from the Knoppix HD Install link under Preferences
Your Debian like Knoppix installation works as any other distribution - Debian, Ubuntu, openSUSE, Mandriva and so on.
@ itman007
Please excuse my error; my comments apply only to the LiveUSB situation.
Yes I did use the Install to hd link thats within the prefrences menu of the live dvd. I assumed the install of this manor would keep changes. To my suprise after installing and configuring a reboot wiped out all my changes.
... please start your "Install to hd", type in a terminaland post the output and also the output fromCode:df -hGreetings Werner * http://www.wp-schulz.de/knoppix/summary.htmlCode:blkid
Own Rescue-CD with Knoppix (Knoppix V6.4.4 remaster)
Last edited by Werner P. Schulz; 07-11-2011 at 04:06 PM.
Sorry fo rthe delay!
knoppix@Microknoppix:~$ su
root@Microknoppix:/home/knoppix# df -h
Filesystem Size Used Avail Use% Mounted on
rootfs 19G 8.6G 11G 45% /
/dev/root 19G 8.6G 11G 45% /
tmpfs 2.0G 8.0K 2.0G 1% /tmp
udev 20M 364K 20M 2% /dev
tmpfs 2.0G 0 2.0G 0% /dev/shm
root@Microknoppix:/home/knoppix# blkid
/dev/sda1: UUID="30c9b7ea-45d2-42d5-b27b-cb4b4e25d251" TYPE="swap"
/dev/sda2: LABEL="XPOS" UUID="25CA52804E148827" TYPE="ntfs"
/dev/sda3: UUID="7559c1a2-cc62-415c-8687-71b08891c43c" TYPE="reiserfs"
/dev/sdb: LABEL="XP_Freeze" UUID="25CA52804E148827" TYPE="ntfs"
/dev/sdc1: LABEL="KINGSTON" UUID="F4A4-243D" TYPE="vfat"
root@Microknoppix:/home/knoppix#
... ok, you have real a HD Installation of Knoppix on /dev/sda3. Therefore I cannot understand, what you mean withWhat had been "wiped out"?To my suprise after installing and configuring a reboot wiped out all my changes.
But what's about /dev/sdc1? Is there also a Knoppix installation? Perhaps flash disk installation?
Greetings Werner * http://www.wp-schulz.de/knoppix/summary.html
Own Rescue-CD with Knoppix (Knoppix V6.4.4 remaster)
Once booted to Knoppix I install webmin and nic drivers. But these are to reinstall every time the pc is rebooted. I again have to reinstall webmin and nic drivers. Knoppix doesnt save my changes. Does this help understand? Knoppix is only installed on sda3. Windows on sda2 which works and another version of windows on the second hard drive sdb, which will not boot. I select it at the grub menu but no luck.
... how did you install "webmin and nic drivers"? I cannot found those with aptitude.
And please read Warning.
Dell Poweredge R630 Server | 2x E5-2680v3 24 Cores | 128GB | 8x HDD Trays
$575.00
Dell PowerEdge R620 Server 2x E5-2660 v1 2.2GHz 16 Cores 256GB RAM 2x 300GB HDD
$89.99
Dell PowerEdge R730XD 28 Core Server 2X Xeon E5-2680 V4 H730 128GB RAM No HDD
$389.99
Dell PowerEdge R720 Server - 2x8c CPU,256Gb RAM, 128Gb SSD/3x900Gb SAS, Proxmox
$340.00
CTO Dell PowerEdge R630 Server, 2x Xeon E5-2620V4, 64GB- 512GB RAM, 480GB SSDs
$246.67
DELL POWEREDGE T430 SERVER W/ DUAL XEON E5-2609 CPU & 16GB MEMORY
$329.00
Dell Poweredge R620 8-Bay CTO Pick your CPU & RAM Config | H710 Raid | 2x PSU
$209.99
Dell R730 8B LFF 2x 2.40GHz 14C Intel Xeon E5-2680 v4 32GB RAM 2x 3TB HDD HBA330
$299.99
DELL PowerEdge R730 Server 2x E5-2680v4 2.4GHz =28 Cores 32GB H730 4xRJ45
$284.00
Dell Poweredge R640 8 SFF Server No HDDs/ CPUs/ RAMs/ Cards/Fan/PSU
$419.99