Page 1 of 2 12 LastLast
Results 1 to 10 of 12

Thread: Save Settings

  1. #1
    Senior Member
    Join Date
    Jul 2011
    Posts
    110

    Save Settings

    Using Knoppix 6.4 I installed to hd from the Knoppix HD Install link under Preferences. All is working fine other than I cant get it to save changes. During setup there was no option for configuring save changes. Can someone give me directions. Thanks greatly!

  2. #2
    Senior Member registered user
    Join Date
    May 2006
    Location
    Columbia, Maryland USA
    Posts
    1,631

  3. #3
    Moderator Moderator
    Join Date
    Nov 2010
    Location
    Germany/ Dietzenbach
    Posts
    1,124
    installed to hd from the Knoppix HD Install link under Preferences
    ... you did "HD Installation", did you? Then you have a Debian like installation. It isn't an installation of Knoppix with compressed filesystem image and additional persistent memory.

    Your Debian like Knoppix installation works as any other distribution - Debian, Ubuntu, openSUSE, Mandriva and so on.

  4. #4
    Senior Member registered user
    Join Date
    May 2006
    Location
    Columbia, Maryland USA
    Posts
    1,631
    @ itman007

    Please excuse my error; my comments apply only to the LiveUSB situation.

  5. #5
    Senior Member
    Join Date
    Jul 2011
    Posts
    110
    Yes I did use the Install to hd link thats within the prefrences menu of the live dvd. I assumed the install of this manor would keep changes. To my suprise after installing and configuring a reboot wiped out all my changes.

  6. #6
    Moderator Moderator
    Join Date
    Nov 2010
    Location
    Germany/ Dietzenbach
    Posts
    1,124
    ... please start your "Install to hd", type in a terminal
    Code:
    df -h
    and post the output and also the output from
    Code:
    blkid
    Greetings Werner * http://www.wp-schulz.de/knoppix/summary.html
    Own Rescue-CD with Knoppix (Knoppix V6.4.4 remaster)
    Last edited by Werner P. Schulz; 07-11-2011 at 04:06 PM.

  7. #7
    Senior Member
    Join Date
    Jul 2011
    Posts
    110
    Sorry fo rthe delay!
    knoppix@Microknoppix:~$ su
    root@Microknoppix:/home/knoppix# df -h
    Filesystem Size Used Avail Use% Mounted on
    rootfs 19G 8.6G 11G 45% /
    /dev/root 19G 8.6G 11G 45% /
    tmpfs 2.0G 8.0K 2.0G 1% /tmp
    udev 20M 364K 20M 2% /dev
    tmpfs 2.0G 0 2.0G 0% /dev/shm
    root@Microknoppix:/home/knoppix# blkid
    /dev/sda1: UUID="30c9b7ea-45d2-42d5-b27b-cb4b4e25d251" TYPE="swap"
    /dev/sda2: LABEL="XPOS" UUID="25CA52804E148827" TYPE="ntfs"
    /dev/sda3: UUID="7559c1a2-cc62-415c-8687-71b08891c43c" TYPE="reiserfs"
    /dev/sdb: LABEL="XP_Freeze" UUID="25CA52804E148827" TYPE="ntfs"
    /dev/sdc1: LABEL="KINGSTON" UUID="F4A4-243D" TYPE="vfat"
    root@Microknoppix:/home/knoppix#

  8. #8
    Moderator Moderator
    Join Date
    Nov 2010
    Location
    Germany/ Dietzenbach
    Posts
    1,124
    ... ok, you have real a HD Installation of Knoppix on /dev/sda3. Therefore I cannot understand, what you mean with
    To my suprise after installing and configuring a reboot wiped out all my changes.
    What had been "wiped out"?

    But what's about /dev/sdc1? Is there also a Knoppix installation? Perhaps flash disk installation?

    Greetings Werner * http://www.wp-schulz.de/knoppix/summary.html
    Own Rescue-CD with Knoppix (Knoppix V6.4.4 remaster)

  9. #9
    Senior Member
    Join Date
    Jul 2011
    Posts
    110
    Once booted to Knoppix I install webmin and nic drivers. But these are to reinstall every time the pc is rebooted. I again have to reinstall webmin and nic drivers. Knoppix doesnt save my changes. Does this help understand? Knoppix is only installed on sda3. Windows on sda2 which works and another version of windows on the second hard drive sdb, which will not boot. I select it at the grub menu but no luck.

  10. #10
    Moderator Moderator
    Join Date
    Nov 2010
    Location
    Germany/ Dietzenbach
    Posts
    1,124
    ... how did you install "webmin and nic drivers"? I cannot found those with aptitude.

    And please read Warning.

Page 1 of 2 12 LastLast

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


Cisco GLC-FE-100FX-RGD 100BASE-FX SFP Transceiver Module picture

Cisco GLC-FE-100FX-RGD 100BASE-FX SFP Transceiver Module

$17.99



Cisco Meraki MA-SFP-1GB-SX 1000BASE-SX SFP Transceiver Module picture

Cisco Meraki MA-SFP-1GB-SX 1000BASE-SX SFP Transceiver Module

$24.99



Cisco Meraki MA-SFP-10GB-SR 10G SFP+ SR 850nm 300m LC MMF picture

Cisco Meraki MA-SFP-10GB-SR 10G SFP+ SR 850nm 300m LC MMF

$29.99



CISCO SFP GLC-GE-100FX 10-2019-02 100Base-FX SFP GBIC Transceiver Module  1pcs picture

CISCO SFP GLC-GE-100FX 10-2019-02 100Base-FX SFP GBIC Transceiver Module 1pcs

$52.99



Genuine Cisco SFP-10G-SR V03 10GBASE-SR SFP+ Transceiver Module 10-2415-03  picture

Genuine Cisco SFP-10G-SR V03 10GBASE-SR SFP+ Transceiver Module 10-2415-03

$8.00



SFP-10G-SR Original Cisco 10GBASE-SR SFP+ V02 Multi mode Transceiver 10-2415-02 picture

SFP-10G-SR Original Cisco 10GBASE-SR SFP+ V02 Multi mode Transceiver 10-2415-02

$5.00



Brand New Cisco GLC-LH-SMD 1000BASE-LX/LH SFP Module 1310nm 10km SMF LC picture

Brand New Cisco GLC-LH-SMD 1000BASE-LX/LH SFP Module 1310nm 10km SMF LC

$13.89



Genuine Cisco ‎SFP-10G-SR Transceiver Module (10-2415-03) picture

Genuine Cisco ‎SFP-10G-SR Transceiver Module (10-2415-03)

$5.85



New HP HPE Aruba J9150D 10G SFP+ LC SR 850nm 300m MMF XCVR Transceiver Module picture

New HP HPE Aruba J9150D 10G SFP+ LC SR 850nm 300m MMF XCVR Transceiver Module

$49.99



10 PCS Cisco GLC-LH-SMD 10-2625-01 1310nm SFP Transceiver Module picture

10 PCS Cisco GLC-LH-SMD 10-2625-01 1310nm SFP Transceiver Module

$85.00