I got it from nvidia.com and compiled the source. Have you treid that, and if so what was the error you had?
Could someone post a version of nvnet.o that will work with KNOPPIX_V3.2-2003-09-05-EN.iso, or a link to it?
I am desperate to get a version of knoppix PXE booting on my home LAN, but the built in kernel and PXE boot environment do not have nvnet.o.
]-[
I got it from nvidia.com and compiled the source. Have you treid that, and if so what was the error you had?
My bad. I am a bit of a Knoppix newbie - I didn't realise (or think it possible) the CD had a full compiler and kernel-source!
Anyway, I've compiled the ("non-GPL" - come ON NVidia, what are you thinking?) nvnet.o and added it to the miniroot.gz (in /modules/net) on my PXE server... PXE booted knoppix from a my server's hard-disk is AWESOME, so much faster than from CD - and the perfect recovery/diskless environment.
Knoppix is great.
]-[
This is Linux. We don't reboot unless we really have to. A simple "/etc/init.d/network(ing) restart" will do just fine.and the connexion was up and running (after a reboot of course ).
hw
Well the new Knoppix 3.3 is out.
Is this one able to auto detect and allow me to use my on board NIC on my Abit NF7-S nForce2 mainboard yet?
Ive tryed lates iso (24.09) on my abit NFS-7 motheboard and is same still no network card detected
koszopal
Well that tells me it's no longer an oversight but has been deliberatly left out due to legal issues with nVidia and never will be fixed.
There's other variants of Knoppix that will work so I'll just have to abandon mainline Knoppix and move over to the other ones.
Its not so bad if you happend to know a guy who does remasters of knoppix. I'm waiting for a couple of updates to the new 3.3 and then I will make Overclockix 3.3, complete with nvnet.
If anyone wants to contribute to the overclockix project by making suggestions, helping me make the overclockix page look half-way decent (I don't really know HTML), or by taking OVerclockix and re-remastering it, be my guest.
Thanx Arkaine23. Oveclockix worked like a charm.
Hi arkaine,Originally Posted by arkaine23
I downloaded your ISO, burned it, and installed the distro on my HD (sda5, I have an Adaptec RAID 2400A controller)
At the reboot I get an error message:
Kernel Panic, unable to mount root fs on 08:05...
what does it mean? I can't understand why... where's wrong?
I tried to repeat installation, but, it is always the same....
I have an Nforce 2 mobo ( NF7-S ).
Thanks in advance for your suggestions.
Carmine.
Dell Poweredge R640 Server | 2x Xeon Gold 6132 | 128GB | H730P | 8x HDD Trays
$1849.00
H261-Z61 2U 24SFF AMD Server 8x EPYC 7551 256-Cores 256GB RAM 8x25G NIC 2x2200W
$2612.18
HP ProLiant DL360 G9 Server | 2 x E5-2660V3 2.6Ghz | 64GB | 2 x 900GB SAS HDD
$339.00
Dell PowerEdge R740XD Server | 2x Gold 6140 | 128GB | H730P | 8x 3.5" HDD Tray
$2589.00
Dell PowerEdge R730XD 28 Core Server 2X Xeon E5-2680 V4 H730 128GB RAM No HDD
$389.99
SuperMicro Server 505-2 Intel Atom 2.4GHz 8GB RAM SYS-5018A-FTN4 1U Rackmount
$202.49
Dell PowerEdge R620 Server 2x E5-2660 v1 2.2GHz 16 Cores 256GB RAM 1x 300GB HDD
$89.99
HP Proliant DL360 Gen9 28 Core SFF Server 2X E5-2680 V4 16GB RAM P440ar No HDD
$196.95
Dell Poweredge R730xd 2.5in 2x E5-2690 v3 2.6ghz 24-Cores 64gb H730 2x 750w
$189.99
DELL PowerEdge R630 8SFF Server 2x E5-2680v3 2.5GHz =24 Cores 32GB H730 4xRJ45
$240.00