home=scan ?
I remember a command that I could run to mount my persistent disk image if I forgot to mount it during the boot process. However, I have searched and searched for it but cannot find it. I believe it is the same command run at boot time that gives the 20 second dialog box.
Thanks
Neeraj
home=scan ?
This is the option when booting up. There is some utility in sbin or bin or someplace like that which if I execute, on a system already running knoppix, it will mount the disk image as my home directory. I did this with knoppix 5.01 when I was having trouble, but cannot find the instructions for this anymore.
Thanks
Neeraj
ACASIS 2.5/3.5 inch 2 Bay SATA USB 3.0 Hard Drive Disk HDD SSD Enclosure 4 RAID
$58.99
LSI 9305-16i SATA SAS 12Gbs RAID Controller PCIe 3.0 x8 IT-Mode 4* 8643 SATA
$229.99
HPE 727263-003 BL460c G9 Raid BBWC Smartstorage Battery
$24.99
Inspur LSI 9300-8i Raid Card 12Gbps HBA HDD Controller High Profile IT MODE
$15.98
LSI MegaRAID 9361-8i 12Gb PCIe 8-Port SAS/SATA RAID 1Gb w/BBU/CacheVault/License
$39.95
OWC Guardian Maximus RAID 0/1 Enclosure
$45.00
LSI MegaRAID 9361-8i 12Gbps PCIe 3 x8 SATA SAS 3 8 Port RAID + BBU & CacheVault
$39.00
4 Bay RAID External Hard Drive Enclosure for 2.5/3.5" SATA HDD/SSD
$79.99
G TECHNOLOGY G RAID 0G04228 2-Bay Thunderbolt 2 RAID Array W/Power Supply
$99.99