See if this thread helps with the "su" issue : http://www.knoppix.net/forum/viewtop...577&highlight=
Dear Members
I am a fan of Knoppix. And I have used 3.x, 4.x and 5.x .
I have Knoppix 5.1 Live CD. I have installed it in a Pentium 4 PC. It works fine. However I have the following problems.
1. If I use KdeSu using the KDE menus, I get the error "...Conversation with Su failed....".
The commands work in Console mode but NOT through KDE menu.
2. When I start Vncserver, I am able to access it from my WIndows PC using VNC Viewer. However, I am not able to access it via browser. (httP://server_ip:5901) I can see the port 5901 open in Linux side.
I stopped my Windows firewall to see whether there is any issue at Windows end. But still the same problem exists.
If there is a problem in Linux side firewall, how can I overcome? Please give the commands which can be used in console ....
I am using Knoppix 5.1 LiveCD (installed in Hard Disk)
See if this thread helps with the "su" issue : http://www.knoppix.net/forum/viewtop...577&highlight=
Thanks.
I was able to overcome the problem of Kde-su using the forum-link provided
The VNC server access through HTTP is pending....
Thanks again
HITACHI HUS724040ALA640 4TB 7200RPM 64MB SATA 6.0Gb/s 3.5" HARD DRIVE ZERO HOURS
$52.00
Seagate ST8000NM0055 8TB 7200RPM 256MB SATA 6.0 Gb/s 3.5" Enterprise Hard Drive
$34.34
Seagate ST1000VM002 1TB 64MB SATA6Gb/s 3.5" (Low Power) Hard Drive -PC, CCTV DVR
$24.99
Western Digital DC HC320 Ultrastar 8TB 7200RPM SATA HD, HUS728T8TALE6L4, 0B36404
$99.00
HGST Ultrastar DC HC520 12TB SATA 6Gb 256MB 3.5" Enterprise HDD- HUH721212ALE601
$74.99
CISCO A03-D1TBSATA 1TB 7.2K 6G 2.5INCH SATA HDD
$9.00
Seagate ST12000NM0127 12TB 256MB 7200RPM 3.5" SATA 6.0Gb/s Enterprise Hard Drive
$93.99
WD Ultrastar DC HC530 14TB SATA 6G 3.5" 7200RPM Enterprise HDD - WUH721414ALE604
$110.00
Western Digital WD4000FYYZ RE 4TB 7200 RPM 64MB Cache SATA 6Gb/s 3.5" Hard Drive
$24.11
Internal HDD SATA 3.5" 250GB-2TB Hard Drive with Legacy Windows 11 Pro Installed
$38.15