-
iso datei in GNU-Grub eintagen als LiveSystem
Hallo,
habe nun schon das ganze netz durchsucht und auch hier geschaut aber finde leider nur andere arten der einrichtung.
ich würde gerne die iso datei in mein GRUB als system eintragen, klar es ist dann immer wieder alles weg was man da macht aber das ist auch ok so.
habe das schon mit einem anderem livesystem so gemacht und da geht es super aber mit knoppix bekomme ich das nicht so recht hin. weiß da einer einen rat?
hier mal meine menu.lst
Code:
# menu.lst - See: grub(8), info grub, update-grub(8)
# grub-install(8), grub-floppy(8),
# grub-md5-crypt, /usr/share/doc/grub
# and /usr/share/doc/grub-doc/.
## default num
# Set the default entry to the entry number NUM. Numbering starts from 0, and
# the entry number 0 is the default if the command is not used.
#
# You can specify 'saved' instead of a number. In this case, the default entry
# is the entry saved with the command 'savedefault'.
# WARNING: If you are using dmraid do not change this entry to 'saved' or your
# array will desync and will not let you boot your system.
default 0
## timeout sec
# Set a timeout, in SEC seconds, before automatically booting the default entry
# (normally the first entry defined).
timeout 5
## hiddenmenu
# Hides the menu by default (press ESC to see the menu)
#hiddenmenu
# Pretty colours
#color cyan/blue white/blue
## password ['--md5'] passwd
# If used in the first section of a menu file, disable all interactive editing
# control (menu entry editor and command-line) and entries protected by the
# command 'lock'
# e.g. password topsecret
# password --md5 $1$gLhU0/$aW78kHK1QfV3P2b2znUoe/
# password topsecret
#
# examples
#
# title Windows 95/98/NT/2000
# root (hd0,0)
# makeactive
# chainloader +1
#
# title Linux
# root (hd0,1)
# kernel /vmlinuz root=/dev/hda2 ro
#
#
# Put static boot stanzas before and/or after AUTOMAGIC KERNEL LIST
### BEGIN AUTOMAGIC KERNELS LIST
## lines between the AUTOMAGIC KERNELS LIST markers will be modified
## by the debian update-grub script except for the default options below
## DO NOT UNCOMMENT THEM, Just edit them to your needs
## ## Start Default Options ##
## default kernel options
## default kernel options for automagic boot options
## If you want special options for specific kernels use kopt_x_y_z
## where x.y.z is kernel version. Minor versions can be omitted.
## e.g. kopt=root=/dev/hda1 ro
## kopt_2_6_8=root=/dev/hdc1 ro
## kopt_2_6_8_2_686=root=/dev/hdc2 ro
# kopt=root=UUID=1f511134-3756-46f2-9621-6f6140dc72c7 ro
## Setup crashdump menu entries
## e.g. crashdump=1
# crashdump=0
## default grub root device
## e.g. groot=(hd0,0)
# groot=(hd0,0)
## should update-grub create alternative automagic boot options
## e.g. alternative=true
## alternative=false
# alternative=true
## should update-grub lock alternative automagic boot options
## e.g. lockalternative=true
## lockalternative=false
# lockalternative=false
## additional options to use with the default boot option, but not with the
## alternatives
## e.g. defoptions=vga=791 resume=/dev/hda5
# defoptions=quiet splash
## should update-grub lock old automagic boot options
## e.g. lockold=false
## lockold=true
# lockold=false
## Xen hypervisor options to use with the default Xen boot option
# xenhopt=
## Xen Linux kernel options to use with the default Xen boot option
# xenkopt=console=tty0
## altoption boot targets option
## multiple altoptions lines are allowed
## e.g. altoptions=(extra menu suffix) extra boot options
## altoptions=(recovery) single
# altoptions=(recovery mode) single
## controls how many kernels should be put into the menu.lst
## only counts the first occurence of a kernel, not the
## alternative kernel options
## e.g. howmany=all
## howmany=7
# howmany=all
## should update-grub create memtest86 boot option
## e.g. memtest86=true
## memtest86=false
# memtest86=true
## should update-grub adjust the value of the default booted system
## can be true or false
# updatedefaultentry=false
## ## End Default Options ##
title Ubuntu, kernel 2.6.20-16-generic
root (hd0,0)
kernel /boot/vmlinuz-2.6.20-16-generic root=UUID=1f511134-3756-46f2-9621-6f6140dc72c7 ro quiet splash
initrd /boot/initrd.img-2.6.20-16-generic
quiet
savedefault
title Ubuntu, kernel 2.6.20-16-generic (recovery mode)
root (hd0,0)
kernel /boot/vmlinuz-2.6.20-16-generic root=UUID=1f511134-3756-46f2-9621-6f6140dc72c7 ro single
initrd /boot/initrd.img-2.6.20-16-generic
title Ubuntu, kernel 2.6.20-15-generic
root (hd0,0)
kernel /boot/vmlinuz-2.6.20-15-generic root=UUID=1f511134-3756-46f2-9621-6f6140dc72c7 ro quiet splash
initrd /boot/initrd.img-2.6.20-15-generic
quiet
savedefault
title Ubuntu, kernel 2.6.20-15-generic (recovery mode)
root (hd0,0)
kernel /boot/vmlinuz-2.6.20-15-generic root=UUID=1f511134-3756-46f2-9621-6f6140dc72c7 ro single
initrd /boot/initrd.img-2.6.20-15-generic
title Ubuntu, memtest86+
root (hd0,0)
kernel /boot/memtest86+.bin
quiet
### END DEBIAN AUTOMAGIC KERNELS LIST
### ISO Sidux
title -Sidux-
kernel (hd0,0)/usr/sidux/vmlinuz boot=fll quiet vga=791 fromiso=/usr/sidux/sidux.iso
initrd (hd0,0)/usr/sidux/miniroot.gz
### ISO Knoppix
title -Knoppix-
kernel (hd0,0)/usr/knoppix/linux boot=fll quiet vga=791 fromiso=/usr/knoppix/knoppixkl.iso
initrd (hd0,0)/usr/knoppix/minirt.gz
Wie man drauß erkennen kann benutze ich Ubuntu als hauptsystem fals das wichtig ist.
freue mich über alles was mich zu meinem ziel führt. bitte keine anderen wege zeigen habe das ganze netz schon durchsucht und schon hunderte andere arten gesehen und würde das gerne so machen. Danke
MfG Moinsen
-
Habe es jetzt schon mal soweit gebracht das er startet, aber dann beim punkt wo er die festplatte sucht wo er die Iso drauf finden soll sagt er das er die nicht finden kann, ist aber alles richtig eingetragen. kann es sein das er die nicht selber monten kann?
MfG moinsen
Similar Threads
-
By grandad in forum Hardware & Booting
Replies: 6
Last Post: 02-27-2009, 09:03 PM
-
By DieterJ in forum German Forum
Replies: 0
Last Post: 11-20-2007, 11:36 AM
-
By romario in forum German Forum
Replies: 1
Last Post: 09-21-2005, 02:02 PM
-
By Neil Young & Crazy Ho in forum General Support
Replies: 1
Last Post: 05-14-2004, 07:05 AM
-
By dantay in forum Hdd Install / Debian / Apt
Replies: 3
Last Post: 03-16-2004, 02:06 PM
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
![IBM System X3250 M3 Server 8GB RAM Intel Xeon x3440 2.53ghz (NO HDD) picture](/store/img/g/M~sAAOSwFVlkVr-r/s-l225/IBM-System-X3250-M3-Server-8GB-RAM-Intel-Xeon-x344.jpg)
IBM System X3250 M3 Server 8GB RAM Intel Xeon x3440 2.53ghz (NO HDD)
$41.99
![1U IBM x3550 M5 4 Bay SFF SAS3 Server 2x E5-2683 V3 28 Core 128GB DDR4 2x Tray picture](/store/img/g/RRoAAOSwonVguq4o/s-l225/1U-IBM-x3550-M5-4-Bay-SFF-SAS3-Server-2x-E5-2683-V.jpg)
1U IBM x3550 M5 4 Bay SFF SAS3 Server 2x E5-2683 V3 28 Core 128GB DDR4 2x Tray
$318.00
![IBM Server Rack Cabinet 9308-RC4 picture](/store/img/g/tSIAAOSwSUpmAe1K/s-l225/IBM-Server-Rack-Cabinet-9308-RC4.jpg)
IBM Server Rack Cabinet 9308-RC4
$200.00
![IBM Power S822 8284-22A 12SFF Power8 3.89GHz 6-Core 64GB RAM No Bezel/HDD Server picture](/store/img/g/5xQAAOSwMXNmRmOG/s-l225/IBM-Power-S822-8284-22A-12SFF-Power8-3-89GHz-6-Cor.jpg)
IBM Power S822 8284-22A 12SFF Power8 3.89GHz 6-Core 64GB RAM No Bezel/HDD Server
$279.99
![IBM System X3650 M4 7915AC1 Server INTEL XEON E5-2609 2.4GHz 8GB SEE NOTES picture](/store/img/g/8N0AAOSwXAJmhb0X/s-l225/IBM-System-X3650-M4-7915AC1-Server-INTEL-XEON-E5-2.jpg)
IBM System X3650 M4 7915AC1 Server INTEL XEON E5-2609 2.4GHz 8GB SEE NOTES
$75.00
![IBM X3950 X6 8x E7-8891 v2 3.2GHz 10C 512GB Server picture](/store/img/g/wwkAAOSw9R9mhadY/s-l225/IBM-X3950-X6-8x-E7-8891-v2-3-2GHz-10C-512GB-Server.jpg)
IBM X3950 X6 8x E7-8891 v2 3.2GHz 10C 512GB Server
$490.00
![IBM x3650 M4 Server Intel Xeon E5-2640 (x2) 144GB RAM No HDDs (#4XN7N) picture](/store/img/g/~~AAAOSwFFZmeyKv/s-l225/IBM-x3650-M4-Server-Intel-Xeon-E5-2640-x2-144GB-RA.jpg)
IBM x3650 M4 Server Intel Xeon E5-2640 (x2) 144GB RAM No HDDs (#4XN7N)
$169.99
![IBM System x3550 M3 Dual Intel Xeon X5650 @2.67GHz 32GB RAM No HDD picture](/store/img/g/oRsAAOSw~pRmQitC/s-l225/IBM-System-x3550-M3-Dual-Intel-Xeon-X5650-2-67GHz-.jpg)
IBM System x3550 M3 Dual Intel Xeon X5650 @2.67GHz 32GB RAM No HDD
$68.50
![DUAL SAS IBM SERVER RACK ENCLOSURE 8765 1UX LTO Gen 2 Tape Drive picture](/store/img/g/74QAAOSwupJhNNju/s-l225/DUAL-SAS-IBM-SERVER-RACK-ENCLOSURE-8765-1UX-LTO-Ge.jpg)
DUAL SAS IBM SERVER RACK ENCLOSURE 8765 1UX LTO Gen 2 Tape Drive
$170.50
![IBM System X3650 Server M2 2 x Xeon X5570 2.93 Ghz w/128 GB/DVDRW picture](/store/img/g/~JAAAOSwPvRmIvNW/s-l225/IBM-System-X3650-Server-M2-2-x-Xeon-X5570-2-93-Ghz.jpg)
IBM System X3650 Server M2 2 x Xeon X5570 2.93 Ghz w/128 GB/DVDRW
$111.95