Did you configure it first? K Menu -> KNOPPIX -> Network/Internet -> ADSL/PPPOE configuration
I'm a new knoppix user from China. I tried to surf the Internet using PPPoE connection . The connection can be established successfully. But when I ping the DNS server , ppp0 doesn't transfer any packet. Knoppix only use eth0 to connect to the Internet . In MS Windows 2000 ,I can use PPPoE without any problem .
![]()
I wonder if anyone can help me.
BTW,if you don't know what I mean , you can contact me by private mesage
Did you configure it first? K Menu -> KNOPPIX -> Network/Internet -> ADSL/PPPOE configuration
Uh...It seems that you misunderstood me. I mean the configuration is correct, and the connection is established, but any of the programs didn't use the ppp0 connection.Originally Posted by SiKing
Maybe you should see this:
Code:eth0 Link encap:Ethernet HWaddr 00:10:DC:9C:53:66 inet addr:192.168.1.25 Bcast:192.168.1.255 Mask:255.255.255.0 inet6 addr: fe80::210:dcff:fe9c:5366/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:5134 errors:0 dropped:0 overruns:0 frame:0 TX packets:318 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:365258 (356.6 KiB) TX bytes:21794 (21.2 KiB) // <--pay attention to this lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:2 errors:0 dropped:0 overruns:0 frame:0 TX packets:2 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:100 (100.0 b) TX bytes:100 (100.0 b) ppp0 Link encap:Point-to-Point Protocol inet addr:172.16.47.242 P-t-P:10.10.10.10 Mask:255.255.255.255 UP POINTOPOINT RUNNING NOARP MULTICAST MTU:1480 Metric:1 RX packets:3 errors:0 dropped:0 overruns:0 frame:0 TX packets:3 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:3 RX bytes:54 (54.0 b) TX bytes:54 (54.0 b) // <--pay attention to this A few seconds later . eth0 Link encap:Ethernet HWaddr 00:10:DC:9C:53:66 inet addr:192.168.1.25 Bcast:192.168.1.255 Mask:255.255.255.0 inet6 addr: fe80::210:dcff:fe9c:5366/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:6522 errors:0 dropped:0 overruns:0 frame:0 TX packets:353 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:467130 (456.1 KiB) TX bytes:22904 (22.3 KiB) // <--pay attention to this lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:2 errors:0 dropped:0 overruns:0 frame:0 TX packets:2 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:100 (100.0 b) TX bytes:100 (100.0 b) ppp0 Link encap:Point-to-Point Protocol inet addr:172.16.47.242 P-t-P:10.10.10.10 Mask:255.255.255.255 UP POINTOPOINT RUNNING NOARP MULTICAST MTU:1480 Metric:1 RX packets:3 errors:0 dropped:0 overruns:0 frame:0 TX packets:3 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:3 RX bytes:54 (54.0 b) TX bytes:54 (54.0 b) // <--pay attention to this
LOT OF 20 Genuine Cisco SFP-10G-SR V03 10GBASE-SR SFP+ Transceiver Module
$95.00
New Precision DWDM SFP+ 10G 80km Tunable Transceiver 50GHz C-Temp DWDM-SFP10G-C
$90.00
New Cisco SFP-10G-LRM 10G SFP+ LRM 1310nm 220m SMF/MMF LC Module
$34.99
For Cisco SFP-10G-T, Ubiquiti UF-RJ45-10G Transceiver, SFP+ to RJ45 10GBase-T
$49.99
π₯π₯π₯ CISCO SFP-10G-SR V03 10-2415-03 850nm 10GBASE-SR SFP+ Multi Module π₯π₯π₯
$6.80
GENUINE Cisco SFP-10G-SR V03 SFP+ GBIC Transceiver Module 10-2415-03
$6.80
SFP-H10GB-CU3M Cisco 10GB SFP+ Twinax Copper 3M Passive Cable
$7.99
Genuine Cisco βSFP-10G-SR Transceiver Module (10-2415-03)
$5.85
Fully Compatibility 10GBase-T Transceiver SFP-10G-T SFP+ to RJ45 Copper 30M 80M
$40.50
New Cisco GLC-TE 1G SFP Copper RJ45 100m 1000BASE-T Transceiver Module
$23.50