This sounds like a corrupted partition to me......maybe the drive is failing or something went goofy during creation of the partition *shrug*
"hdb: lost interput" is never a good sign
Take care,
-Justin
One Mynds Eye
I'm installing Knoppix 5.0.1 on a 2nd harddisk in my system having installed Windows 2000 on the first harddisk.
Installation went OK (Debian, ext3, GRUB in mbr after sing "Knoppix lang=us screen=1024x768 dma installer" bootoptions) and i can see both partitions created by installationprog (1 GB and over 70 Gb) after booting Windows2000 and looking at Disk management (allthough I don't see them using Windows Explorer).
But when I try to boot (no matter what entry I choose from the menu) it starts well and shows hda , hdb and hdc (harddisk, harddisk, dvdwriter) and after that it tells (TWO times):
hdb dma_timer_expiry: dma status == 0x61
hdb DMA timeout error
hdb ma_timeout_error: status = 0x58 (Driveready, Seekcomplete Datarequest)
ide failed opcode was : unknown
Then it continues and tells
Found hardware profile in /etc/modules-2.6.17
Starting the hotplug events dispatcher : udevs
Synthesising the hotplugsevents.... done
Waiting /dev to be fully populated .... hda dma_timer-expiry : status == 0x21
(done)
hda : DMA timeout error
hda : DMA timeout error status = 0x58 (Driveready, Seekcomplete Datarequest)
ide: failed opcode was unknown
hdb : lost interrupt
that last line (hdb: lost interrupt) will now be repeated over and over again and system will not proceed
a) What is the problem
b) how can I solve it
This sounds like a corrupted partition to me......maybe the drive is failing or something went goofy during creation of the partition *shrug*
"hdb: lost interput" is never a good sign
Take care,
-Justin
One Mynds Eye
Cisco Catalyst C9300-24UX-A 24 Port 10G/mGig Copper UPOE Network Switch
$475.00
Cisco 3560CG Series 8 Port POE Network Switch WS-C3560CG-8PC-S
$80.00
Cisco WS-C2960X-48FPD-L 48 V07 POE+ GE+2 10G SFP+, LAN BASE 740W w/ C2960X-Stack
$140.00
Cisco WS-C3560CX-12PC-S 12 Port GbE PoE IP Base Catalyst Managed Switch, TESTED
$174.00
🔥🔥🔥 CISCO SFP-10G-SR V03 10-2415-03 850nm 10GBASE-SR SFP+ Multi Module 🔥🔥🔥
$6.80
GENUINE Cisco SFP-10G-SR V03 SFP+ GBIC Transceiver Module 10-2415-03
$6.80
Cisco C3850-NM-2-10G 2 Port Network Exp.Module for 3850
$30.99
Cisco SFP-10G-SR 10-2415-03 10 Gigabit Transceiver LOT OF 10 @ C
$39.99
Cisco 2900 Series CISCO2901/K9 v06 Integrated Services Router
$39.99
Cisco WS-C3850-12X48U-S 48x (12x MultiGB) UPoE RJ-45 1x Mod Slot Switch, Tested
$259.00