"swapon -s" will list the status of your swap partition(s)
"vmstat" or even "top" will mention swap usage (but probably not the details if you've got several partitions)
There are probably GUI equivalent but this should get you going
HI!
Whenever I knoppix-installer a new PC, I always run qtparted first to set up dual partitions (hda1=wimpdoze, hda2=knoppix) and a swap partition.
My question is, how do I know that I set up the swap properly? Is there someway to see if its being used and what percentage of it is loaded at any given time?
TIA,
AJG
"swapon -s" will list the status of your swap partition(s)
"vmstat" or even "top" will mention swap usage (but probably not the details if you've got several partitions)
There are probably GUI equivalent but this should get you going
OK, thanx a lot! I give that a try.
Regards,
AJG
DOH! Why didn't I think of top???
Thanx,
AJG
Grandstream GS-HT802 2 Port Analog Telephone Adapter VoIP Phone & Device, Black
$32.00
Cisco VG202XM Analog Voice Gateway VoIP -- [NEW/FULL KIT]
$76.00
Yealink T54W IP Phone, 16 VoIP Accounts. 4.3-Inch Color Display - Black
$99.99
LOT OF 10 Cisco CP-7841-K9 VoIP 4-Line Business Phone w/ Stand Handset Cord
$69.99
Yealink W73H IP DECT VOIP Phone
$10.00
New Cisco 7945G IP VoIP Gigabit GIGE Telephone Phone CP-7945G -
$24.95
Cisco CP-7945G VOIP Phone With Stand & Handset Business IP Phone 7945
$3.00
Polycom VVX 400 VOIP Phone VVX400
$39.99
Grandstream WP810 Portable Wi-Fi Phone Voip Phone and Device
$94.88
Yealink SIP-T41P PoE Ultra Elegant VoIP Phone
$29.95