Apparently, using the old wind0ze trick will work, as I got the card working both in linux and windoze.
install driver, then install card. With the system booting up with the card instead of hotplugging, I have no probs.
Thanks for the quiet help.
I'm having an issue with a sony pcg-grx700 + a dlink dwl-g650 card with knoppix 3.7 live.
Currently, it sees ath0, has my SSID up, shows managed, frequency, access point, and bit rate, along with link quality & signal level.
My link light is lit, but pump -i ath0 gives me operation failed after the lights blink.
I've read that there may be an issue with dhcpd, but all that appears to be here is dhcpd3 which isn't running..
Wondering if I have an issue, or if I'm missing something obvious. Also, it's a possibility that this card is malfunctioning, as I get the same thing in Windows -- detected, but not connected.
Anyone have any ideas?
Apparently, using the old wind0ze trick will work, as I got the card working both in linux and windoze.
install driver, then install card. With the system booting up with the card instead of hotplugging, I have no probs.
Thanks for the quiet help.
Intel PCIe SSD AIC RAID Controller Card G97168-252
$44.55
LSI 9305-16i SATA SAS 12Gbs RAID Controller PCIe 3.0 x8 IT-Mode 4* 8643 SATA
$229.99
Cisco UCS LSI MegaRAID 9271CV-8I SAS2308 PCIe SAS Internal RAID Controller
$28.00
Dell HBA330 12GBPS SAS Internal HBA Controller (NON-RAID) PCIe Card J7TNV 0J7TNV
$40.95
Inspur LSI 9300-8i Raid Card 12Gbps HBA HDD Controller High Profile IT MODE
$15.98
LSI MegaRAID 9361-8i 12Gb PCIe 8-Port SAS/SATA RAID 1Gb w/BBU/CacheVault/License
$39.95
ORICO Multi Bay RAID Hard Drive Enclosure USB 3.0/ Type-C For 2.5/3.5'' HDD SSDs
$87.99
LSI MegaRAID 9361-8i 12Gbps PCIe 3 x8 SATA SAS 3 8 Port RAID + BBU & CacheVault
$39.00
4 Bay RAID External Hard Drive Enclosure for 2.5/3.5" SATA HDD/SSD
$79.99
G TECHNOLOGY G RAID 0G04228 2-Bay Thunderbolt 2 RAID Array W/Power Supply
$99.99