What kind of video card? (Use scanpci or lspci to obtain PCI ids.)
KNOPPIX has known problems with particular chipsets (e.g. Neomagic). Someone needs to fix what's broken in /usr/share/hwdata/Cards.
Everything works great with Knoppix on my p3 micronpc transportGX laptop... except... my mouse shows up as a big white block about 70x70 pixels.
any thoughts on how I can fix this?
What kind of video card? (Use scanpci or lspci to obtain PCI ids.)
KNOPPIX has known problems with particular chipsets (e.g. Neomagic). Someone needs to fix what's broken in /usr/share/hwdata/Cards.
Edit /etc/X11/XF86Config-4 and uncomment the line
Option "sw_cursor"
It is in the "Device" section
If you are running from CD restart the xserver. I do it from the command line with init 3 then init 5
Good luck!
Mike
I used lspci and my VCA controller lists as: S3 Inc. 86C270-294 Savage/IX-MV (rev 13)Originally Posted by EPS
Is this considered a troublesome one?
This worked!Originally Posted by mmaki
If I'm running from a cd, how can I get it to boot this way all the time. Restarting forces me change it all over again.
Save your configuration to a floppy there is an option off the Knoppix menu for this, then boot using the floppyconfig cheat code.Originally Posted by elEcho
Cisco Meraki MA-SFP-1GB-SX 1000BASE-SX SFP Transceiver Module
$24.99
Cisco GLC-FE-100FX-RGD 100BASE-FX SFP Transceiver Module
$17.99
Cisco GLC-GE-100FX 100BASE-FX SGMII SFP Transceiver Module
$83.99
Cisco SFP-10/25G-CSR-S 10/25GBASE-CSR SFP28, 850nm, 100m, LC,
$54.00
Genuine Cisco SFP-10G-SR V03 10GBASE-SR SFP+ Transceiver Module 10-2415-03
$8.00
Lot of 10 - HP 10Gb SR SFP+ Transceiver 455883-B21 455885-001 456096-001 850nm
$23.99
Brand New Cisco GLC-LH-SMD 1000BASE-LX/LH SFP Module 1310nm 10km SMF LC
$13.89
Genuine Cisco GLC-TE 30-1475-01 V01 1000BASE-T SFP COPPER RJ-45 100M TRANSCEIVER
$11.90
LOT OF 20 Genuine Cisco SFP-10G-SR V03 10GBASE-SR SFP+ Transceiver Module
$89.00
Juniper Networks EX3300-48P 48-Port PoE+ 4x SFP+ Network Switch w/ Power Cord
$43.95