What kind of video card? (Use scanpci or lspci to obtain PCI ids.)
KNOPPIX has known problems with particular chipsets (e.g. Neomagic). Someone needs to fix what's broken in /usr/share/hwdata/Cards.
Everything works great with Knoppix on my p3 micronpc transportGX laptop... except... my mouse shows up as a big white block about 70x70 pixels.
any thoughts on how I can fix this?
What kind of video card? (Use scanpci or lspci to obtain PCI ids.)
KNOPPIX has known problems with particular chipsets (e.g. Neomagic). Someone needs to fix what's broken in /usr/share/hwdata/Cards.
Edit /etc/X11/XF86Config-4 and uncomment the line
Option "sw_cursor"
It is in the "Device" section
If you are running from CD restart the xserver. I do it from the command line with init 3 then init 5
Good luck!
Mike
I used lspci and my VCA controller lists as: S3 Inc. 86C270-294 Savage/IX-MV (rev 13)Originally Posted by EPS
Is this considered a troublesome one?
This worked!Originally Posted by mmaki
If I'm running from a cd, how can I get it to boot this way all the time. Restarting forces me change it all over again.
Save your configuration to a floppy there is an option off the Knoppix menu for this, then boot using the floppyconfig cheat code.Originally Posted by elEcho
8 Ports Unmanaged Industrial Ethernet Switch Network Gigabit Ethernet Switch
$76.50
Cisco SG110 8 Port Gigabit Ethernet Switch SG110D-08-UK
$39.00
InHand Networks 5/8 Port Industrial Unmanaged Fast Ethernet/Giga DIN-Rail Switch
$76.50
HP 2530-48G 48 Port Gigabit Ethernet Network Switch J9775A
$30.95
New Linksys SE3005 5-port Gigabit Ethernet Switch
$18.99
New 10/100 Mbps 8 Ports Fast Ethernet LAN Desktop RJ45 Network Switch Hub
$11.49
Linksys SE3008 8 Ports Rack Mountable Gigabit Ethernet Switch
$21.99
HP ProCurve 2530-24G J9776A 24 Port Gigabit Ethernet Managed Network Switch
$34.99
Juniper Networks EX3300-48P 48-Port PoE+ 4x SFP+ Network Switch w/ Power Cord
$43.95