Try adding the cheatcode nodma. So you start with
knoppix 2 vga=normal nodma
Any good?
Fergus
Please help.
How can I start step by step?
Knoppix 5.1 dont't starts.
By testing I found that the release with Kernel 2.6 didn't start and 2.4 works well.
So I downloaded Knippix 3.6 Version for testing from one CD.
There you can select between starting with kernel 2.4 and 2.6.
I use the option: 2 vga=normal
When I use the Version 2.6
I get the message:
loading linux ...........
loading minirt.gz...... (minirt26.gz)
Ready.
The cursor is flashing the message stays on the screen (with the option: 2 vga=normal)
and nothing more - the keyboard buffer is getting an overflow if I use the keyboart (beeping).
I have tried many different cheat codes.
I wonder whats with the screen, because the isolinux for starting makes screen outputs.
Even in the expert-mode there is no detailed output after the message.
Does anyone now the folloow up of the start process. Is the first what happens - changing
the screen output function (form text to graphic???) that there is not one information
about the next successfull step?
Is there any possibillity to test the start-procedure without screen - beeps for every step -
or output per serial output???
Thanks in advance.
monika
alias the_idealist100
Try adding the cheatcode nodma. So you start with
knoppix 2 vga=normal nodma
Any good?
Fergus
Hallo Fergue,
to Fergue:
thank you for your help - please excuse the in German written replay - it was late
and Iwas very tiered I think.
to all:
the problem is not still in question, because the laptop is defect. With my new
desktop I use knoppix 5.3.1.
Please excuse the in German written replay - it was late and Iwas very tiered I think.
--- Because the problem is never relevant to me, I will not translate all the text. - - -
erst mal danke für den Hilfsversuch. Melde mich so spät, weil ich vorher nicht dazu
gekommen bin, mich um das Thema zu kümmern.
Leider hilft auch das nicht. Hatte am Donnerstag in einem gentoo UsertreffeOriginally Posted by fergus
den Hinweis bekommen, verschiedene cheatcodes zu testen - so ist bereits die
folgende Kombination getestet.
vga=normal noapic nolapic acpi=off apm=off noagp noapm nodma nomce nofirewire nopcmcia noscsi noswap nousb nosmp noaudio pci=biosirq
Mein Problem ist u.a., dass ich kein DSL habe und mir so nicht einmal die DVD
mit Source-Code herunterladen kann.
Auch habe ich ja schon mit fb1024x768 und anderen die Darstellung
beeinflussenden Optionen gearbeitet.
Die einzige möglichkeit die ich sehen würde, wäre ein theoretisches Debuggen
(real geht nicht, da der Bildschirm ja nichts anzeigt oder Knoppix nicht startet)
der ersten Vorgänge beim und nach dem Start, in der Hoffnung den Unterschied
zu finden. Dann könnte man ja eventuell Häppchenweise auf die neue Release
umstellen. Dazu braucht man jedoch abgesehen von dem Aufwand an Zeit noch
einen Zweiten Rechner, von dem aus man immer wieder eine geänderte Zwischen-
version erzeugen könnte.
Nun ja zu dem Thema mache ich mal ein neues Thread auf.
Nochmals Danke!
Gruß
The_idealist100
Dell R730 w/ 2x E5-2650v3 10c, 192GB (12x16GB) RAM, H730 Mini, 2x 750W PSU
$499.99
Dell PowerEdge R720 Server - 2x8c CPU,256Gb RAM, 128Gb SSD/3x600Gb SAS, Proxmox
$340.00
$599.99
Dell PowerEdge M610 Blade Server E5620@2.2GHZ (6x)8GB RAM (2x)146GB 15K SAS HDD
$75.00
DELL PowerEdge R730 Server 2x E5-2690v3 2.6GHz =24 Cores 32GB H730 4xRJ45
$275.00
Dell PowerEdge R720XD Xeon E5-2680 V2 2.8GHz 20 Cores 256GB RAM 12x4TB
$510.00
Dell PowerEdge R730XD 28 Core Server 2X Xeon E5-2680 V4 H730 128GB RAM No HDD
$389.99
SuperMicro Server 505-2 Intel Atom 2.4GHz 8GB RAM SYS-5018A-FTN4 1U Rackmount
$224.99
Dell PowerEdge R620 Rack Server
$71.99
DELL PowerEdge R730 Server 2x E5-2643v3 3.4GHz =12 Cores 64GB H730 4xRJ45
$306.00