Results 1 to 3 of 3

Thread: 3.2-iso can not connect (use DHCP) internet

  1. #1
    Junior Member
    Join Date
    May 2003
    Posts
    5

    3.2-iso can not connect (use DHCP) internet

    i have two pc , first is DHCP server use windows2000, it use ADSL moden(USB interface). The second use Knoppix 3.2--5.20 ISO.

    but i can not use DHCP connect internet.
    my NIC is 8139too, and knoppix can find it.
    I ping 127.0.0.1 is ok, but can not ping 192.168.0.1

    how can i do it ?

    i already add nameserver in /etc/hosts, and edit reso...conf file , add gateway. and so on. at this time , can ping 192.168.0.1 but still can not get connect : like ping www.yahoo.com it's can not.

    BTW: when i use 3.1 , is all can work fine.

    thanks .

  2. #2
    Senior Member registered user
    Join Date
    Mar 2003
    Location
    colorado springs, colorado
    Posts
    1,933

    Re: 3.2-iso can not connect (use DHCP) internet

    Quote Originally Posted by wangcity
    i have two pc , first is DHCP server use windows2000, it use ADSL moden(USB interface). The second use Knoppix 3.2--5.20 ISO.

    but i can not use DHCP connect internet.
    my NIC is 8139too, and knoppix can find it.
    I ping 127.0.0.1 is ok, but can not ping 192.168.0.1

    how can i do it ?

    i already add nameserver in /etc/hosts, and edit reso...conf file , add gateway. and so on. at this time , can ping 192.168.0.1 but still can not get connect : like ping www.yahoo.com it's can not.

    BTW: when i use 3.1 , is all can work fine.

    thanks .
    Pinging 127.0.0.1 only tells you that your local (lo) network is up.

    Not sure I follow you- can you ping 192.168.0.1 or not? I assume that 192.168.0.1 is the ip of your DHCP server yes?

    As root:

    # ifconfig -a

    Do you have an ip address on eth0?
    If you don't have an ip address as root try this:

    # netcardconfig

    Here's how to take the network up and down at will.
    # ifdown -a
    # ifup -a
    # ifconfig -a


    If you already have an ip address on eth0 can you ping 204.71.200.67?

  3. #3
    Administrator Site Admin-
    Join Date
    Apr 2003
    Location
    USA
    Posts
    5,441

    Re: 3.2-iso can not connect (use DHCP) internet

    Quote Originally Posted by wangcity
    i have two pc , first is DHCP server use windows2000, it use ADSL moden(USB interface). The second use Knoppix 3.2--5.20 ISO.

    but i can not use DHCP connect internet.
    my NIC is 8139too, and knoppix can find it.
    I ping 127.0.0.1 is ok, but can not ping 192.168.0.1

    how can i do it ?

    i already add nameserver in /etc/hosts, and edit reso...conf file , add gateway. and so on. at this time , can ping 192.168.0.1 but still can not get connect : like ping www.yahoo.com it's can not.

    BTW: when i use 3.1 , is all can work fine.

    thanks .
    If you are able to ping 182.168.0.1 then your hardware is working. Try running netcardconfig and doing another DHCP setup. Did that work? Please post the result. If not, try netcardconfig again, but manually set up your card (look at what you are currently using for a DNS server on another system so you'll have that setting when asked for it). Pick a unique IP in the proper range (looks like it's 192.168.0.xxx for you), a mask of 255.255.255.0, and give 102.168.0.1 as your gateway. Again, please post back the result.

    You might also want to try sudo mii-tool -r and then netcardconfig again, although I would do the above first.

Similar Threads

  1. Can't connect to the internet....
    By calathar in forum Networking
    Replies: 12
    Last Post: 05-03-2005, 06:47 AM
  2. Cant connect to the internet
    By simplyskate in forum Networking
    Replies: 10
    Last Post: 04-28-2005, 06:45 PM
  3. HELP!!! I CAN'T CONNECT TO THE INTERNET!
    By vzlandude in forum Networking
    Replies: 15
    Last Post: 04-01-2005, 04:24 AM
  4. connect to the internet
    By sunpascal in forum MS Windows & New to Linux
    Replies: 2
    Last Post: 12-02-2004, 02:08 PM
  5. help! can't connect to internet
    By THiM in forum Hardware & Booting
    Replies: 5
    Last Post: 05-19-2003, 07:27 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


Cisco GLC-FE-100FX-RGD 100BASE-FX SFP Transceiver Module picture

Cisco GLC-FE-100FX-RGD 100BASE-FX SFP Transceiver Module

$17.99



Silicom (PE210G2SPI9A-XR) 10Gb Dual Port SFP+ PCIe Ethernet Adapter Low Profile picture

Silicom (PE210G2SPI9A-XR) 10Gb Dual Port SFP+ PCIe Ethernet Adapter Low Profile

$19.99



Lot of 10pcs Brocade 57-1000012-01 8Gbps SWL 850nm SFP+ Optical Transceivers picture

Lot of 10pcs Brocade 57-1000012-01 8Gbps SWL 850nm SFP+ Optical Transceivers

$19.00



Cisco Meraki MA-SFP-1GB-SX 1000BASE-SX SFP Transceiver Module picture

Cisco Meraki MA-SFP-1GB-SX 1000BASE-SX SFP Transceiver Module

$24.99



OEM Intel X520-DA2 Ethernet Server Adapter 10Gbps Dual Port SFP+ E10G42BTDAPG1P5 picture

OEM Intel X520-DA2 Ethernet Server Adapter 10Gbps Dual Port SFP+ E10G42BTDAPG1P5

$16.99



Juniper Networks EX3300-48P 48-Port PoE+ 4x SFP+ Network Switch w/ Power Cord picture

Juniper Networks EX3300-48P 48-Port PoE+ 4x SFP+ Network Switch w/ Power Cord

$43.95



Dell Mellanox ConnectX-4 Lx CX4121C Dual 25GbE SFP28 LP (20NJD) picture

Dell Mellanox ConnectX-4 Lx CX4121C Dual 25GbE SFP28 LP (20NJD)

$39.00



Genuine Cisco SFP-10G-SR V03 10GBASE-SR SFP+ Transceiver Module 10-2415-03  picture

Genuine Cisco SFP-10G-SR V03 10GBASE-SR SFP+ Transceiver Module 10-2415-03

$8.00



LOT OF 20 Genuine Cisco SFP-10G-SR V03 10GBASE-SR SFP+ Transceiver Module picture

LOT OF 20 Genuine Cisco SFP-10G-SR V03 10GBASE-SR SFP+ Transceiver Module

$89.00



Arista DCS-7050SX-64-R 48P 10GbE SFP+ 4P 40GbE QSFP+ RA Switch picture

Arista DCS-7050SX-64-R 48P 10GbE SFP+ 4P 40GbE QSFP+ RA Switch

$179.00