Results 1 to 3 of 3

Thread: 3.2-iso can not connect (use DHCP) internet

  1. #1
    Junior Member
    Join Date
    May 2003
    Posts
    5

    3.2-iso can not connect (use DHCP) internet

    i have two pc , first is DHCP server use windows2000, it use ADSL moden(USB interface). The second use Knoppix 3.2--5.20 ISO.

    but i can not use DHCP connect internet.
    my NIC is 8139too, and knoppix can find it.
    I ping 127.0.0.1 is ok, but can not ping 192.168.0.1

    how can i do it ?

    i already add nameserver in /etc/hosts, and edit reso...conf file , add gateway. and so on. at this time , can ping 192.168.0.1 but still can not get connect : like ping www.yahoo.com it's can not.

    BTW: when i use 3.1 , is all can work fine.

    thanks .

  2. #2
    Senior Member registered user
    Join Date
    Mar 2003
    Location
    colorado springs, colorado
    Posts
    1,933

    Re: 3.2-iso can not connect (use DHCP) internet

    Quote Originally Posted by wangcity
    i have two pc , first is DHCP server use windows2000, it use ADSL moden(USB interface). The second use Knoppix 3.2--5.20 ISO.

    but i can not use DHCP connect internet.
    my NIC is 8139too, and knoppix can find it.
    I ping 127.0.0.1 is ok, but can not ping 192.168.0.1

    how can i do it ?

    i already add nameserver in /etc/hosts, and edit reso...conf file , add gateway. and so on. at this time , can ping 192.168.0.1 but still can not get connect : like ping www.yahoo.com it's can not.

    BTW: when i use 3.1 , is all can work fine.

    thanks .
    Pinging 127.0.0.1 only tells you that your local (lo) network is up.

    Not sure I follow you- can you ping 192.168.0.1 or not? I assume that 192.168.0.1 is the ip of your DHCP server yes?

    As root:

    # ifconfig -a

    Do you have an ip address on eth0?
    If you don't have an ip address as root try this:

    # netcardconfig

    Here's how to take the network up and down at will.
    # ifdown -a
    # ifup -a
    # ifconfig -a


    If you already have an ip address on eth0 can you ping 204.71.200.67?

  3. #3
    Administrator Site Admin-
    Join Date
    Apr 2003
    Location
    USA
    Posts
    5,441

    Re: 3.2-iso can not connect (use DHCP) internet

    Quote Originally Posted by wangcity
    i have two pc , first is DHCP server use windows2000, it use ADSL moden(USB interface). The second use Knoppix 3.2--5.20 ISO.

    but i can not use DHCP connect internet.
    my NIC is 8139too, and knoppix can find it.
    I ping 127.0.0.1 is ok, but can not ping 192.168.0.1

    how can i do it ?

    i already add nameserver in /etc/hosts, and edit reso...conf file , add gateway. and so on. at this time , can ping 192.168.0.1 but still can not get connect : like ping www.yahoo.com it's can not.

    BTW: when i use 3.1 , is all can work fine.

    thanks .
    If you are able to ping 182.168.0.1 then your hardware is working. Try running netcardconfig and doing another DHCP setup. Did that work? Please post the result. If not, try netcardconfig again, but manually set up your card (look at what you are currently using for a DNS server on another system so you'll have that setting when asked for it). Pick a unique IP in the proper range (looks like it's 192.168.0.xxx for you), a mask of 255.255.255.0, and give 102.168.0.1 as your gateway. Again, please post back the result.

    You might also want to try sudo mii-tool -r and then netcardconfig again, although I would do the above first.

Similar Threads

  1. Can't connect to the internet....
    By calathar in forum Networking
    Replies: 12
    Last Post: 05-03-2005, 06:47 AM
  2. Cant connect to the internet
    By simplyskate in forum Networking
    Replies: 10
    Last Post: 04-28-2005, 06:45 PM
  3. HELP!!! I CAN'T CONNECT TO THE INTERNET!
    By vzlandude in forum Networking
    Replies: 15
    Last Post: 04-01-2005, 04:24 AM
  4. connect to the internet
    By sunpascal in forum MS Windows & New to Linux
    Replies: 2
    Last Post: 12-02-2004, 02:08 PM
  5. help! can't connect to internet
    By THiM in forum Hardware & Booting
    Replies: 5
    Last Post: 05-19-2003, 07:27 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


Dell Poweredge R640 Server | 2x Silver 4114 | 64GB | H730P | 2x HDD Trays picture

Dell Poweredge R640 Server | 2x Silver 4114 | 64GB | H730P | 2x HDD Trays

$1539.00



Dell PowerEdge R730XD 28 Core Server 2X Xeon E5-2680 V4 H730 128GB RAM No HDD picture

Dell PowerEdge R730XD 28 Core Server 2X Xeon E5-2680 V4 H730 128GB RAM No HDD

$389.99



Dell PowerEdge R720XD Xeon E5-2680 V2 2.8GHz 20 Cores 256GB RAM 12x4TB picture

Dell PowerEdge R720XD Xeon E5-2680 V2 2.8GHz 20 Cores 256GB RAM 12x4TB

$510.00



Dell PowerEdge R730, 2 sinks, SystemBoard, 8 trays,H330,Idrac 8 exp, 2x750w Psu picture

Dell PowerEdge R730, 2 sinks, SystemBoard, 8 trays,H330,Idrac 8 exp, 2x750w Psu

$135.00



DELL PowerEdge R630 8SFF Server 2x E5-2690v3 2.6GHz =24 Cores 32GB H730 4xRJ45 picture

DELL PowerEdge R630 8SFF Server 2x E5-2690v3 2.6GHz =24 Cores 32GB H730 4xRJ45

$254.00



DELL POWEREDGE T430 SERVER W/ DUAL XEON E5-2609 CPU & 16GB MEMORY picture

DELL POWEREDGE T430 SERVER W/ DUAL XEON E5-2609 CPU & 16GB MEMORY

$329.00



Dell PowerEdge R720 Server - 2x8c CPU,256Gb RAM, 128Gb SSD/3x600Gb SAS, Proxmox picture

Dell PowerEdge R720 Server - 2x8c CPU,256Gb RAM, 128Gb SSD/3x600Gb SAS, Proxmox

$360.00



CTO Dell PowerEdge R630 Server, 2x Xeon E5-2620V4, 64GB- 512GB RAM, 480GB SSDs picture

CTO Dell PowerEdge R630 Server, 2x Xeon E5-2620V4, 64GB- 512GB RAM, 480GB SSDs

$246.67



Dell R730XD 12LFF 2SFF 2x E5-2690v4 28C 128GB H730 12xTrays iDRAC ENT RJ-45 10G picture

Dell R730XD 12LFF 2SFF 2x E5-2690v4 28C 128GB H730 12xTrays iDRAC ENT RJ-45 10G

$670.00



Dell Poweredge R630 2x Xeon E5-2680 v3 2.5ghz 24-Cores / 128gb / H730 / iDracEnt picture

Dell Poweredge R630 2x Xeon E5-2680 v3 2.5ghz 24-Cores / 128gb / H730 / iDracEnt

$249.99