Hi,
I am willing to install knoppix on hard disk, booting the machine from a USB drive in the first place. I could take an .iso knoppix file, put it on the USB drive, boot from that, run knoppix-installer and have everything neatly installed on /dev/hda1. The system won't boot by itself, though, so I use grub to force a linux loader onto the hard disk's mbr. I configure it to boot on the /boot kernel image and initrd that have been put there (on the hard disk).
Now, problems start on reboot, as the system gets confused over its filesystem. I typically hit a "mount: fs type devfs not supported by kernel; umount devfs not mounted; pivot_root: no such file or directory".
Is there a reason why substituting an USB drive for a CD would drive me to all this mess?
If that should be important, let me add that I use the clusterKNOPPIX_V3.6-2004-08-16-EN-cl1.iso iso file, as my goal is to install clusterknoppix on diskless nodes (but with a USB entry on which I can boot).
Any help greatly appreciated.
Best,
Fabrice.
IBM LSI SAS9220-8i M1015 46M0861 SAS/SATA PCI-e RAID Controller Both brackets
$139.00
LSI 9305-16i SATA SAS 12Gbs RAID Controller PCIe 3.0 x8 IT-Mode 4* 8643 SATA
$229.99
XDHXT DELL PERC H710P 6Gbps 1GB PCI RAID CONTROLLER 0XDHXT
$59.00
HPE 869102-001 Smart Array E208i-a SR Gen10 Storage Controller RAID SP: 871039
$129.99
Inspur LSI 9300-8i Raid Card 12Gbps HBA HDD Controller High Profile IT MODE
$15.98
LSI MegaRAID 9361-8i 12Gb PCIe 8-Port SAS/SATA RAID 1Gb w/BBU/CacheVault/License
$35.96
ORICO Multi Bay RAID Hard Drive Enclosure USB 3.0/ Type-C For 2.5/3.5'' HDD SSDs
$86.99
LSI MegaRAID 9361-8i 12Gbps PCIe 3 x8 SATA SAS 3 8 Port RAID + BBU & CacheVault
$39.00
Yottamaster 5 Bay RAID Hard Drive Enclosure USB3.1 Type C 2.5"/3.5" SATA HDD SSD
$142.49
ACASIS 2.5/3.5 inch 2 Bay SATA USB 3.0 Hard Drive Disk HDD SSD Enclosure 4 RAID
$58.99