Got knoppix 5.1 installed on a 750MB partiton of a 1 gig USB stick and a seperate 250MB partition on the stick for the knoppix image as per the normal stick install.
after doing "apt-get update" vast amounts of package information is downloaded and it chews up far too much memory on the approx 250MB of the knoppix.img file. so now when I do something I get "device is full". have trimmed down the storing of other stuff to a minimum but the package info is still too large.
1) what is the procedure to reduce all the package info already
downloaded and stored in the knoppix.img
2) Even if I try download say a knoppix.iso of 700MB to a completely seperate 1 gig USB, the temporary files from the download (bittorrent or straight download) are stored on the initial 250 MB knoppix.img partition and cause the "Device is full" message to abort the download. How do I get around this?
SAS - HGST Ultrastar 7K4000 HUS724040ALA640 0F14688 3.5" 4TB 7.2K RPM 64MB HDD
$19.99
HITACHI HUS724040ALA640 4TB 7200RPM 64MB SATA 6.0Gb/s 3.5" HARD DRIVE ZERO HOURS
$52.00
Western Digital DC HC320 Ultrastar 8TB 7200RPM SATA HD, HUS728T8TALE6L4, 0B36404
$99.00
WD 4TB Gold Enterprise - 7200 RPM SATA 6Gb/s 128MB CACHE 3.5" HDD - WD4002FYYZ
$42.95
HGST Ultrastar DC HC520 12TB SATA 6Gb 256MB 3.5" Enterprise HDD- HUH721212ALE601
$74.99
Seagate ST12000NM0127 12TB SATA 6Gb/s 256MB 7200RPM 3.5" Enterprise Hard Drive
$99.99
1TB HDD/SSD 2.5" SATA Hard Drive with Windows 10 or Windows 11 Pro Installed
$18.99
Seagate Exos X20 18TB SATA 6Gb/s 3.5" Enterprise Hard Drive - ST18000NM003D
$168.00
Hitachi 4TB 3.5" Hard Drive HUS724040ALE640 Ultrastar 7K4000 Internal 7.2K
$49.95
Seagate ST1000VM002 1TB 64MB SATA6Gb/s 3.5" (Low Power) Hard Drive -PC, CCTV DVR
$24.99