You don't want to use the install script. That's ok, but then what you need to do is essentially do every step in the install script by hand.
If you want to change paths, then you must be very careful to change them in all locations (files).
Hi there.
I've build a LiveCD called Lunix Live which is based on Gentoo Linux i686 using XFCE 4.4.1.
Now i want to install Klik onto it. So i have a few questions.
Is it possible to install Klik on this Gentoo-based LiveCD using XFCE4?
I tried not to execute the install script, instead i wanted to copy the files 'by hand'.
I had a look at the install file to figure out what files are needed. Also i looked at
this page: http://www.pro-linux.de/berichte/klik.html#ToC9. There's a german howto about
what files are copied/removed to un/install Klik.
There are only descriptions about how to install klik using KDE, but none using XFCE4.
I thing Klik is the right solution for my LiveCD (Lunix Live), cause its possible to install programs
temporary, which are not installed on my small (398M) Live distribution.
I don't want to execute the install script, i want to copy each file needed by Klik to
its destination. Can someone tell my how to do this using the XCFE4 directory structure
not the KDE one.
I hope someone can explain me how to install Klik on the Live system described above.
Thanks for your help...
_morpheus_
You don't want to use the install script. That's ok, but then what you need to do is essentially do every step in the install script by hand.
If you want to change paths, then you must be very careful to change them in all locations (files).
Nutanix NXS2U2NL12G500 2U Server with 2x X10DRT-P-G5-NI22 Blades USED
$349.99
Dell PowerEdge M620 Blade Server 2 x Xeon e5 2665 8 x 16 GB(128) RAM - No HD
$44.99
Dell PowerEdge FX2S FC830 Blade Server Chassis Enclosure 2*2000W PSU NO BLADES
$299.99
Google Search Appliance - Dell PowerEdge R710 x2 Xeon X5690 192GB Memory 6TB HDD
$529.99
HP ProLiant BL460c Gen8 G8 Blade Server 2x Intel Xeon 10-Core E5-2670v2 NO RAM
$40.00
Dell PowerEdge FC430 Blade with 2 x Xeon 2680v3 CPUs
$119.99
Dell PowerEdge M620 Blade Server
$39.99
Dell PowerEdge FX2s CTO Blade 4 Slot 2U Chassis 2x 2000W
$399.00
Dell PowerEdge M610 Blade Server | 2 x Xeon E5645 | 8x12GB RAM | 2 x 500 GB HDD
$129.94
Dell PowerEdge M1000e Chassis w/ 16 x M600 Blade Servers(No Ram, 2 x 147GB HD)
$300.00