You don't want to use the install script. That's ok, but then what you need to do is essentially do every step in the install script by hand.
If you want to change paths, then you must be very careful to change them in all locations (files).
Hi there.
I've build a LiveCD called Lunix Live which is based on Gentoo Linux i686 using XFCE 4.4.1.
Now i want to install Klik onto it. So i have a few questions.
Is it possible to install Klik on this Gentoo-based LiveCD using XFCE4?
I tried not to execute the install script, instead i wanted to copy the files 'by hand'.
I had a look at the install file to figure out what files are needed. Also i looked at
this page: http://www.pro-linux.de/berichte/klik.html#ToC9. There's a german howto about
what files are copied/removed to un/install Klik.
There are only descriptions about how to install klik using KDE, but none using XFCE4.
I thing Klik is the right solution for my LiveCD (Lunix Live), cause its possible to install programs
temporary, which are not installed on my small (398M) Live distribution.
I don't want to execute the install script, i want to copy each file needed by Klik to
its destination. Can someone tell my how to do this using the XCFE4 directory structure
not the KDE one.
I hope someone can explain me how to install Klik on the Live system described above.
Thanks for your help...
_morpheus_
You don't want to use the install script. That's ok, but then what you need to do is essentially do every step in the install script by hand.
If you want to change paths, then you must be very careful to change them in all locations (files).
SUN Blade X6250 Server 8GB RAM DUAL PROCESSORS 594-4531-01
$109.99
Dell PowerEdge FX2 FX2S Enclosure - 4x PowerEdge FC640 w/ 8x Gold 6132 112C 1TB
$2699.99
Dell PowerEdge M620 0F9HJC Blade Server 2*E5-2670 2.60GHz 192GB RAM 2*300GB SAS
$103.99
HP ProLiant BL460c G9 (Gen9) 2x E5-2670V3 12 Core 3.1GHz No Ram or No Drives
$59.98
DELL M630 BLADE SERVER x2 XEON E5-2660V3 @ 2.6GH H730 PERC HDD CADDIES 16GB FC
$50.00
HP ProLiant BL460c Server Blade (2 x CPU) 24GB RAM/No Drives
$45.60
Dell PowerEdge M630 Blade Server 1x Xeon E5-2630 v4 CPU / Motherboard P/N 0R10KG
$69.99
Dell PowerEdge C6400 Blade Server Chassis w/ 2x 2400W PSUs - Preproduction Model
$349.00
Dell PowerEdge FX2s CTO Blade 4 Slot 2U Chassis 2x 2000W
$399.00
Cisco UCS 5108 Blade Server Chassis Enclosure N20-C6508 4x PSU 8x Fans 2x Fabric
$139.99