You don't want to use the install script. That's ok, but then what you need to do is essentially do every step in the install script by hand.
If you want to change paths, then you must be very careful to change them in all locations (files).
Hi there.
I've build a LiveCD called Lunix Live which is based on Gentoo Linux i686 using XFCE 4.4.1.
Now i want to install Klik onto it. So i have a few questions.
Is it possible to install Klik on this Gentoo-based LiveCD using XFCE4?
I tried not to execute the install script, instead i wanted to copy the files 'by hand'.
I had a look at the install file to figure out what files are needed. Also i looked at
this page: http://www.pro-linux.de/berichte/klik.html#ToC9. There's a german howto about
what files are copied/removed to un/install Klik.
There are only descriptions about how to install klik using KDE, but none using XFCE4.
I thing Klik is the right solution for my LiveCD (Lunix Live), cause its possible to install programs
temporary, which are not installed on my small (398M) Live distribution.
I don't want to execute the install script, i want to copy each file needed by Klik to
its destination. Can someone tell my how to do this using the XCFE4 directory structure
not the KDE one.
I hope someone can explain me how to install Klik on the Live system described above.
Thanks for your help...
_morpheus_
You don't want to use the install script. That's ok, but then what you need to do is essentially do every step in the install script by hand.
If you want to change paths, then you must be very careful to change them in all locations (files).
HPE BL460c G9 ProLiant Blade | 2x Xeon E5-2620V3 | NO RAM | P244BR | 2xHDD Tray
$179.00
HPE BL460c G10 ProLiant Blade | 2x Silver 4110 | 16GB | P204I | 2x300GB 10KRPM
$1419.00
DELL PEM640 POWEREDGE M640 BLADE SERVER
$539.95
HP ProLiant BL460c G9 (Gen9) 2x E5-2670V3 12 Core 3.1GHz No Ram or No Drives
$59.98
Cisco UCS B200 M4 Blade Server 2X E5-2697A V4 18C 36T 2.60GHZ 768GB RAM No HDD
$1000.00
Dell PowerEdge M620 0F9HJC Blade Server 2*E5-2670 2.60GHz 192GB RAM 2*300GB SAS
$103.99
DELL M630 BLADE SERVER x2 XEON E5-2660V3 @ 2.6GH H730 PERC HDD CADDIES 16GB FC
$50.00
Dell PowerEdge M640 Blade Server
$539.95
Dell PowerEdge M620 Blade Server
$39.99
DELL PowerEdge M630 Blade 2x E5-2683v3 2.0GHz =28 Cores 256GB H330 2x10Gb X520
$450.00