Results 1 to 3 of 3

Thread: Mounting encrypted home directory AFTER Knoppix booted up

  1. #1
    Junior Member
    Join Date
    May 2008
    Posts
    1

    Mounting encrypted home directory AFTER Knoppix booted up

    Hey guys. I've been searching this topic everywhere but was unable to find the proper command or steps.
    What I am looking to do is to mount the Knoppix encrypted home directory after knoppix already booted up, and when it scanned for the home dir during boot it wasn't there. Or may be adding additional usb drive after it is booted with encrypted knoppix.img and mounting it as an additional volume or directory.
    Thanks in advance.

  2. #2
    Junior Member
    Join Date
    May 2009
    Posts
    2
    I would also like to be able to do this, and can't seem to find a solution. But forget the encryption for a moment --
    even less than that would be to be able to boot from the live CD, and then mount a home partition from a usb drive (one could at least encrypt files on the home partition).

    But this functionality seems to have been lost in 6.0. You can create a persistent home directory if you install knoppix to flash or a hard drive, but not from the live cd. There is an undocumented cheatcode knoppix_dir=blah, http://www.knoppix.net/forum/viewtopic.php?p=120552 where blah could be the flashdrive containing a different microknoppix version, but I only want the settings and home directory to be on the flashdrive, not the entire version of the micropknoppix....

    One might hope that something like "home=/dev/hdb1/knoppix_data.img" might work, with knoppix_data.img being what has now replaced knoppix.img in 6.0, but this doesn't seem to work either. Frustrating! And no documentation on this change from 5 to 6.0

    Anyone figured this out?

  3. #3
    Junior Member
    Join Date
    May 2009
    Posts
    2
    Usually /etc/init.d/cryptdisks and /etc/init.d/cryptdisks-early would be started by the started systemV init scipt. But I notice in /etc/inittab, that KNOPPIX is bypassing the usual systemV init and instead calling /etc/init.d/knoppix-autoconfig. The problem with changing this script, is that it is run after home is already mounted. It looks like the mounting is instead done in an init script which is found in /boot/minirt.gz. I'm guessing you need to modify this as described here:
    http://www.knoppix.net/wiki/Knoppix_...up_script_text
    and add "/etc/init.d/cryptdisks start" and "/etc/init.d/cryptdisks-early start" before this script runs "findknoppix devices".
    This should hopefully ask you to enter your password, and decrypt the usbstick.

    To have a home directory there, I'm guessing you need to put the file knoppix-data.img on it (this is created as part of the knoppix flash utility from the knoppix menu) and is found in /KNOPPIX of the usbstick. Then the above init file probably has to be modified to find the knoppix-data.img (since it won't be in /KNOPPOX).

    Let me know if that works!

Similar Threads

  1. if you have a home directory and you have issues mounting
    By maestrobwh1 in forum General Support
    Replies: 0
    Last Post: 08-25-2009, 07:35 PM
  2. Replies: 6
    Last Post: 06-01-2007, 02:01 AM
  3. Elaboration Mounting Home directory to usb drive
    By dvryknopper in forum General Support
    Replies: 4
    Last Post: 04-11-2006, 06:34 PM
  4. Recover EFS encrypted directory
    By graan_jonlo in forum MS Windows & New to Linux
    Replies: 1
    Last Post: 11-14-2005, 08:35 PM
  5. Bug: no fsck on encrypted persistent home directory
    By tjacobs in forum General Support
    Replies: 1
    Last Post: 08-22-2004, 11:32 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


Juniper QFX5120-32C-AFI 32x100GbE Switch Airflow-Warranty picture

Juniper QFX5120-32C-AFI 32x100GbE Switch Airflow-Warranty

$4959.00



Juniper MX204 +JUNOS and Dual Power Supply + Rack Mount-LIFETIME WARRANTY picture

Juniper MX204 +JUNOS and Dual Power Supply + Rack Mount-LIFETIME WARRANTY

$8959.00



Juniper 48-Port GbE PoE+ & 4-Port 10GB SFP+ Network Switch EX3300-48P w/ License picture

Juniper 48-Port GbE PoE+ & 4-Port 10GB SFP+ Network Switch EX3300-48P w/ License

$49.99



Juniper Networks EX2300-24P 24 Port Gigabit PoE 4 SFP 1/10G Network Switch picture

Juniper Networks EX2300-24P 24 Port Gigabit PoE 4 SFP 1/10G Network Switch

$119.00



Juniper EX3300-48P, 48 Port PoE+ Gigabit Network Switch w/ Power cord picture

Juniper EX3300-48P, 48 Port PoE+ Gigabit Network Switch w/ Power cord

$54.99



Juniper EX4300-48T 48 Port 1G 4 QSFP 40G Dual PSU AFO w/ Rails, EX-UM-4X4SFP Mod picture

Juniper EX4300-48T 48 Port 1G 4 QSFP 40G Dual PSU AFO w/ Rails, EX-UM-4X4SFP Mod

$169.00



Juniper 48-Port PoE GbE Network Switch  w/ Dual Power Supplies F B EX4300-48P picture

Juniper 48-Port PoE GbE Network Switch w/ Dual Power Supplies F B EX4300-48P

$178.99



Juniper EX4600-40F-AFO 24x SFP+/SFP & 4x QSFP+ Ports Switch 2XPSU TESTED picture

Juniper EX4600-40F-AFO 24x SFP+/SFP & 4x QSFP+ Ports Switch 2XPSU TESTED

$749.95



Juniper QFX5100-48S 48-Port 10GbE SFP+ 6x40GbE QSFP Network Switch w/Ears Tested picture

Juniper QFX5100-48S 48-Port 10GbE SFP+ 6x40GbE QSFP Network Switch w/Ears Tested

$599.99



Juniper Networks EX3300-48T 48 Port Gigabit 4x 10 GbE SPF+ Ports Switch - Tested picture

Juniper Networks EX3300-48T 48 Port Gigabit 4x 10 GbE SPF+ Ports Switch - Tested

$50.00