-
Senior Member
registered user
Hmm. That's odd. I was looking at the previous output you posted from cdrecord --scanbus (scsibus1:1,0,0 100), but as Stephen has noted, try changing your entry in /etc/fstab to scd0.
Adam
-
I changed /dev/scd1 to /dev/scd0 in /etc/fstab shut down restarted
mount /cdrom1 mounts the cd which is in the ide-cdrom, not the usb2 cd-rw
Same result using console or icon I created.
Shouldn't I see a reference to the usb2 cd-rw when I enter
KDE Control Center > Information > USB Devices?
I only see the hubs.
I do see the usb2 cd-rw with KDE Control Center > Information > SCSI
-
Senior Member
registered user
Originally Posted by
bilzer
I do see the usb2 cd-rw with KDE Control Center > Information > SCSI
It may think it's a HD can't hurt trying to mount it as /dev/sda.
-
Tried /dev/sda then /dev/sda1 --- msgs say not valid block device
I may try reinstall with cd-rw on, altho that requirement defeats the value of usb.
I sure would like to know if other users with usb show attached usb devices (other than root hub) when they enter:
KDE Control Center > Information > USB Devices
I do not.
-
Did a reinstall with the usb2 cd-rw turned on.
Didn't solve the problem.
Thanks for all your suggestions.
-
Senior Member
registered user
bilzer,
Sorry about this. I think we are a bit miffed also. If you were able to get this device to work from the cd, then keep trying. Perhaps it's something simple that we are overlooking. Best of luck.
-
:P :P SUCCESS!
I have 4 ports on the usb2 card. Thought I had tested them all but that got lost in testing various configurations of /etc/fstab - this one works now:
/dev/scd1 /mnt/cdrom1 auto defaults,ro,user,noexec,noauto 0 0
along with /mnt/cdrom1
Also, the device now shows up in KDE Control Center > Information > USB devices.
Thanks again for your help.
-
Senior Member
registered user
Good to hear you got it going good luck.
-
Senior Member
registered user
Congrats. Glad you got it working. In the long run this whole excersice will prove benificial because you will have learned a bit more about how Debian opperates on your system. Again, congrats and your persistance paid off.
Similar Threads
-
By chiefreborn in forum Hardware & Booting
Replies: 6
Last Post: 05-13-2005, 12:35 PM
-
By NewGuy in forum General Support
Replies: 4
Last Post: 01-04-2005, 03:30 AM
-
By komplikazione in forum Hdd Install / Debian / Apt
Replies: 2
Last Post: 12-10-2004, 10:35 PM
-
By orgler in forum General Support
Replies: 0
Last Post: 08-28-2004, 06:52 PM
-
By Messiaen in forum Hdd Install / Debian / Apt
Replies: 4
Last Post: 07-11-2004, 04:21 PM
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
Lot of 10pcs Brocade 57-1000012-01 8Gbps SWL 850nm SFP+ Optical Transceivers
$19.00
Cisco Nexus 48-Port 10G SFP+ Switch N9K-9396PX w/ 9K-M12PQ 12-Port 40G QSFP
$249.99
Cisco 10G SFP+ Module SFP-10G-SR 10-2415-03 (Lot of 5)
$24.99
Silicom (PE210G2SPI9A-XR) 10Gb Dual Port SFP+ PCIe Ethernet Adapter Low Profile
$19.99
Genuine Cisco SFP-10G-SR V03 10GBASE-SR SFP+ Transceiver Module 10-2415-03
$8.00
NEW Sealed Cisco SFP-10G-LR 10GBASE-LR SFP+ 1310nm 10km *US Shipping*
$18.00
Brand New Cisco GLC-LH-SMD 1000BASE-LX/LH SFP Module 1310nm 10km SMF LC
$13.89
Mellanox Original MFM1T02A-SR 10GbE 10GBASE-SR SFP+ Transceiver
$9.00
Cisco Meraki MA-SFP-10GB-SR 10G SFP+ SR 850nm 300m LC MMF
$29.99
LOT OF 20 Genuine Cisco SFP-10G-SR V03 10GBASE-SR SFP+ Transceiver Module
$89.00