Results 1 to 3 of 3

Thread: Hard drive no longer shows on desktop

  1. #1
    Junior Member
    Join Date
    Aug 2008
    Posts
    2

    Hard drive no longer shows on desktop

    I saw a thread similar to this, but have additional questions...I am new to this forum. Some background: The first time I ran Knoppix Live CD everything worked like a charm, and I was able to recover some data from a non-booting WinXP system. I needed to step away from the system and so I shut everything down. When I returned, it boots into the Knoppix desktop just fine, but does not show either of the hard drives on the desktop.

    When it goes through the Knoppix boot process, it finds the drives just fine, lists them by name and so on. It lists the drives as hdc and hdd (in the command line-like boot process), and also lists the two DVD drives on the system (hda and hdb). But I can't see them on the DESKTOP. I can see a USB external drive on the desktop and the Knoppix CD. I did not change anything - permissions, ownership, nothing - when I booted either time.

    Can anyone suggest possible solutions? In reading other posts, users mentioned including a log to help troubleshoot. If that would help, please give me specific instructions on how to find the log.

    Many thanks,

    Kirk-out

  2. #2
    Junior Member
    Join Date
    Aug 2008
    Posts
    2

    Re: Hard drive no longer shows on desktop

    One additional point: I saw a user with a similar problem that was fixed by using Knoppix ver. 5.3.1. The latest I can find on any mirror is 5.3. Knopper.net lists 5.3 but I can't find it.

    Kirk

  3. #3
    Administrator Site Admin-
    Join Date
    Apr 2003
    Location
    USA
    Posts
    5,441
    I don't know the answer to your original problem. You didn't try to write to that hard drive, did you? As long as you didn't there is no good reason that I know that you would no longer get the partitions. i would try again after a complete power down. I also wonder why the hard drive is on the secondary IDE controller and the optical drive is on the primary, this is backwards from the normal way systems are usually set up. I don't have a good reason why you should change your configuration but then again I don't know why it's not working, so you might want to join the rest of us who put the hard drives on the primary IDE controller and see if that makes a difference.

    As to 5.3 and 5.3.1 , 5.3 was never officially released on the Internet, only 5.3.1. I never use the mirrors any longer, and I can't say what you'll find there. But I very strongly advise that if you download 5.3.1 that you get it with BitTorrent, not from a mirror. I've seen way too many bad mirror downloads with Knoppix (nothing else gives me a problem, but Knoppix mirrors mess up about 50% of the time). BitTorrent is highly reliable and much faster than the mirrors when properly configured. See the Get Knoppix link near the top of this page for details. But one more thing, you mentioned that you have the 5.1.x CD. There is no official CD version of 5.3.x released, just a DVD version. So if you can't use a DVD version, stick with 5.1.1.

Similar Threads

  1. Replies: 3
    Last Post: 12-05-2010, 04:38 PM
  2. Hard Drive no longer mounts
    By wfran123 in forum Hardware & Booting
    Replies: 3
    Last Post: 05-13-2008, 04:25 PM
  3. I cannot see Windows hard drive on Knoppix desktop
    By Crimpshrine in forum MS Windows & New to Linux
    Replies: 13
    Last Post: 08-23-2006, 12:28 PM
  4. Desktop hard drive icons?
    By maxmartin in forum Customising & Remastering
    Replies: 4
    Last Post: 02-19-2006, 06:09 PM
  5. desktop full of hard drive icons
    By Lion in forum Hdd Install / Debian / Apt
    Replies: 2
    Last Post: 05-13-2005, 10:45 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


Cisco SG95-16 16-Port Gigabit Switch SG95-16-KR picture

Cisco SG95-16 16-Port Gigabit Switch SG95-16-KR

$47.00



Cisco RV320 Dual WAN VPN 4 Port Gigabit Router w/ Web Filtering RV320-WB-K9-NA picture

Cisco RV320 Dual WAN VPN 4 Port Gigabit Router w/ Web Filtering RV320-WB-K9-NA

$374.00



Cisco IP Phone 6841 – CP-6841-3PW-NA-K9= picture

Cisco IP Phone 6841 – CP-6841-3PW-NA-K9=

$75.00



Cisco WS-C3850-48P-L 48-Port Gigabit 3850 PoE Switch w/ 715W+ C3850-NM-4-1G Mod picture

Cisco WS-C3850-48P-L 48-Port Gigabit 3850 PoE Switch w/ 715W+ C3850-NM-4-1G Mod

$83.00



Cisco QSFP-40G-SR-BD BiDi Short-reach Transceiver, 1 Year Warranty picture

Cisco QSFP-40G-SR-BD BiDi Short-reach Transceiver, 1 Year Warranty

$17.25



Cisco C3850-NM-2-10G 2 Port Network Exp.Module for 3850 picture

Cisco C3850-NM-2-10G 2 Port Network Exp.Module for 3850

$38.99



Genuine Cisco SFP-10G-SR V03 10GBASE-SR SFP+ Transceiver Module 10-2415-03  picture

Genuine Cisco SFP-10G-SR V03 10GBASE-SR SFP+ Transceiver Module 10-2415-03

$8.00



Cisco WS-C3850-48P-L 48-Port Gigabit 3850 PoE Switch w/ 715W Network Switch picture

Cisco WS-C3850-48P-L 48-Port Gigabit 3850 PoE Switch w/ 715W Network Switch

$41.43



Cisco WS-C3850-48F-S Catalyst 3850 48x 1GB PoE+ RJ-45 1x Module Switch picture

Cisco WS-C3850-48F-S Catalyst 3850 48x 1GB PoE+ RJ-45 1x Module Switch

$185.00