Hallo,
nachdem das Remastern geklappt hat und ich jetzt von dem ISO starte, kann ich keine Konsole mehr öffnen und bekomme diese Fehlermeldung:
Laut dieser Anleitung http://www.knoppix.net/wiki/Knoppix_..._may_be_neededKonsole kann kein PTY Öffnen. Dies liegt wahrscheinlich an einem Fehler in der Einrichtung der PTY-Geräte. Konsole benötigt Lese- und Schreibzugriff auf die PTY- Geräte.
Aber wo ändere ich das???Leah 21:52, 11 Nov 2005 (GMT) I found that for some reason the permissions on /dev/pty were not being set to writable, so you couldn't open a konsole session on a new remaster, as it needs users to be able to access the pty's. I recommend making this change to the </path/to/develsystem>KNOPPIX.build/Knoppix.clean script as well, just in case. Change the (backslashes wrapping text here not present in script) line:
chmod 666 /dev/ttyp* /dev/sg* /dev/audio* \
/dev/dsp* /dev/mixer* /dev/sequencer*
to
chmod 666 /dev/pty* /dev/ttyp* /dev/sg* /dev/audio* \
/dev/dsp* /dev/mixer* /dev/sequencer* /dev/null
Gruß
Smokyjoe
[/url][/quote]
HPE BL460c G9 ProLiant Blade | 2x Xeon E5-2620V3 | NO RAM | P244BR | 2xHDD Tray
$179.00
DELL PEM640 POWEREDGE M640 BLADE SERVER
$539.95
HP ProLiant BL460c G9 (Gen9) 2x E5-2670V3 12 Core 3.1GHz No Ram or No Drives
$59.98
Dell PowerEdge M620 0F9HJC Blade Server 2*E5-2670 2.60GHz 192GB RAM 2*300GB SAS
$103.99
GIGABYTE T181-G20 1U DUAL SCALABLE 4x V100 SXM2 SOCKET SERVER
$1295.00
Dell Poweredge M620 Blade Server 2x E5-2680 v2 2.8ghz 20-Cores / 256gb / H710
$499.99
Dell PowerEdge VRTX Rack Chassis 25-Bay 14.4TB HDD 2x M640 Blade 512GB RAM 2-Bay
$2335.00
Dell PowerEdge M1000E 16x Slots Blade Server W/ 8x Blade Server Blank Filler
$589.00
Sun Microsystems Blade 150 Workstation UltraSPARC-IIe 650MHz 256MB Server No HDD
$224.97
Cisco UCS 5108 Blade Server Chassis Enclosure N20-C6508 4x PSU 8x Fans 2x Fabric
$139.99