Hallo,
nachdem das Remastern geklappt hat und ich jetzt von dem ISO starte, kann ich keine Konsole mehr öffnen und bekomme diese Fehlermeldung:
Laut dieser Anleitung http://www.knoppix.net/wiki/Knoppix_..._may_be_neededKonsole kann kein PTY Öffnen. Dies liegt wahrscheinlich an einem Fehler in der Einrichtung der PTY-Geräte. Konsole benötigt Lese- und Schreibzugriff auf die PTY- Geräte.
Aber wo ändere ich das???Leah 21:52, 11 Nov 2005 (GMT) I found that for some reason the permissions on /dev/pty were not being set to writable, so you couldn't open a konsole session on a new remaster, as it needs users to be able to access the pty's. I recommend making this change to the </path/to/develsystem>KNOPPIX.build/Knoppix.clean script as well, just in case. Change the (backslashes wrapping text here not present in script) line:
chmod 666 /dev/ttyp* /dev/sg* /dev/audio* \
/dev/dsp* /dev/mixer* /dev/sequencer*
to
chmod 666 /dev/pty* /dev/ttyp* /dev/sg* /dev/audio* \
/dev/dsp* /dev/mixer* /dev/sequencer* /dev/null
Gruß
Smokyjoe
[/url][/quote]
DELL PowerEdge R730XD Server 2x E5-2690v4 2.6GHz =28 Cores 64GB H730 4xRJ45
$387.00
1U Supermicro Server 10 Bay 2x Intel Xeon 3.3Ghz 8C 128GB RAM 480GB SSD 2x 10GBE
$273.00
Cisco UCS C220 M4 1x Xeon E5-2667 V4 3.20GHZ 128GB DDR4-2400MHZ 2x 770W AC PSU
$129.99
Cisco UCS C220 M3 1U 2x 6-Core Xeon E5-2620 2.0GHz / 64GB RAM / No HDD
$89.99
Dell PowerEdge R630 Server 2x E5-2640v3 2.60Ghz 16-Core 64GB H330
$182.65
DELL R630 SERVER 8 x 2.5'' 2X E5-2680V4 32GB RAM IDRAC ENT & NDC 2X 495W PSU
$169.95
Dell PowerEdge R730XD 28 Core Server 2X Xeon E5-2680 V4 H730 128GB RAM No HDD
$389.99
SuperMicro Server 505-2 Intel Atom 2.4GHz 8GB RAM SYS-5018A-FTN4 1U Rackmount
$202.49
Dell Poweredge R210 Server X3450 2.67GHz 8GB RAM - NO HDDs
$59.99
1U BareMetal pfsense opnsense Router Firewall DNS Server 6x 10GB Ethernet Ports
$149.00