Hallo,
nachdem das Remastern geklappt hat und ich jetzt von dem ISO starte, kann ich keine Konsole mehr öffnen und bekomme diese Fehlermeldung:
Laut dieser Anleitung http://www.knoppix.net/wiki/Knoppix_..._may_be_neededKonsole kann kein PTY Öffnen. Dies liegt wahrscheinlich an einem Fehler in der Einrichtung der PTY-Geräte. Konsole benötigt Lese- und Schreibzugriff auf die PTY- Geräte.
Aber wo ändere ich das???Leah 21:52, 11 Nov 2005 (GMT) I found that for some reason the permissions on /dev/pty were not being set to writable, so you couldn't open a konsole session on a new remaster, as it needs users to be able to access the pty's. I recommend making this change to the </path/to/develsystem>KNOPPIX.build/Knoppix.clean script as well, just in case. Change the (backslashes wrapping text here not present in script) line:
chmod 666 /dev/ttyp* /dev/sg* /dev/audio* \
/dev/dsp* /dev/mixer* /dev/sequencer*
to
chmod 666 /dev/pty* /dev/ttyp* /dev/sg* /dev/audio* \
/dev/dsp* /dev/mixer* /dev/sequencer* /dev/null
Gruß
Smokyjoe
[/url][/quote]
HITACHI HUS724040ALA640 4TB 7200RPM 64MB SATA 6.0Gb/s 3.5" HARD DRIVE ZERO HOURS
$52.00
Western Digital WD4000FYYZ RE 4TB 7200 RPM 64MB Cache SATA 6Gb/s 3.5" Hard Drive
$24.22
Western Digital 4TB Internal 7.2KRPM 3.5" (WD4000FYYZ) SATA Hard Drive ZERO HOUR
$69.99
Seagate ST8000NM0055 8TB 7200RPM 256MB SATA 6.0 Gb/s 3.5" Enterprise Hard Drive
$34.50
HGST Ultrastar DC HC520 12TB SATA 6Gb 256MB 3.5" Enterprise HDD- HUH721212ALE601
$74.99
CISCO A03-D1TBSATA 1TB 7.2K 6G 2.5INCH SATA HDD
$9.00
Seagate ST12000NM0127 12TB SATA 6Gb/s 256MB 7200RPM 3.5" Enterprise Hard Drive
$99.99
WD Ultrastar DC HC530 14TB SATA 6G 3.5" 7200RPM Enterprise HDD - WUH721414ALE604
$110.00
Seagate ST1000VM002 1TB 64MB SATA6Gb/s 3.5" (Low Power) Hard Drive -PC, CCTV DVR
$24.99
Seagate ST8000NM0055 8TB 7200RPM 256MB SATA 6.0 Gb/s 3.5" Enterprise Hard Drive
$34.50